# Timiszoara (Xaoc Devices)

Canonical page: https://eurorackref.com/xaoc-devices/timiszoara/

- id: `xaoc-devices/timiszoara`
- width: 10 HP; depth: unknown mm
- power: +12 V 120 mA, −12 V 45 mA, +5 V ? mA
- status: current
- functions: Delay, Reverb, Chorus / Flanger / Phaser, Pitch Shifter / Frequency Shifter, Granular Processing, Distortion / Saturation, Ring Modulator, Resonator / physical model, Reverse playback, Tempo / Clock Sync, Stereo Inputs / Outputs

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| left input | audio | left signal input | not stated | unknown | right input | 855 |
| right input | audio | right signal input | not stated | unknown | left input | 855 |
| param 1 CV | cv | program parameter 1 | -5 to 5 V | unknown | not stated | 855 |
| param 2 CV | cv | program parameter 2 | -5 to 5 V | unknown | not stated | 855 |
| param 3 CV | cv | program parameter 3 | -5 to 5 V | unknown | not stated | 855 |
| mix CV | cv | wet/dry mix CV | -5 to 5 V | unknown | not stated | 855 |
| next | trigger | next program trigger | not stated | unknown | not stated | 855 |
| scan | cv | program scan CV | -5 to 8 V | bipolar | 0V | 855 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| left output | audio | left signal output | not stated | unknown | Wet/dry mixer | 855 |
| right output | audio | right signal output | not stated | unknown | Wet/dry mixer | 855 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| encoder | knob | program/bank select | — | FV-1 DSP | 855 |
| param 1 | fader | program parameter 1 | — | FV-1 DSP | 855 |
| param 2 | fader | program parameter 2 | — | FV-1 DSP | 855 |
| param 3 | fader | program parameter 3 | — | FV-1 DSP | 855 |
| left input level | knob | left input attenuator | — | left input | 855 |
| right input level | knob | right input attenuator | — | right input | 855 |
| mix | fader | wet/dry balance | — | Wet/dry mixer | 855 |

## Modes

- Program [855]
- Bank library [855]
- spin demo [855]
- tap tempo programs [856]
- chorus [856]
- combo [856]
- deconstr [856]
- distort [856]
- flanger [856]
- glitch [856]
- phaser [856]
- pitch [856]
- resonate [856]
- ringmod [856]
- spectral [856]
- parallax [855]
- reconstr [855]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| DSP | sample rate | 32.768 kHz | — | 855 |
| DSP | converter resolution | 24 bit | — | 855 |
| DSP | total delay memory | 1 s | — | 855 |
| Program | max instructions | 128 instructions | — | 855 |
| Program | max registers | 32 registers | — | 855 |
| Program | max delay memory | 32768 words | — | 855 |
| Bank | programs per bank | 8 programs | — | 855 |
| CV inputs | input range | 10 Vpp | — | 855 |
| scan | input range | -5 to 8 V | — | 855 |
| scan | step per volt | 1 programs | — | 855 |
| Bank name | max length | 8 characters | — | 855 |
| Parameter name | max length | 8 characters | — | 855 |
| Program name | max length | 9 characters | — | 855 |
| Program | parameters | 3 count | — | 855 |
| Factory programs | count | 176 programs | — | 857 |
| combo ptch+rev | pitch shift range | -1 to 1 octaves | — | 856 |
| single-channel delay | max time | 1 s | mono delay programs | 856 |
| stereo delay | max time | 0.5 s | full stereo delay programs | 856 |
| tap tempo mono-long | max delay | 2 s | — | 856 |
| downshift | frequency shift range | -5000 to 0 Hz | — | 856 |
| tap tempo ratio | scaling | not stated | 1:2, 2:3, 1:1, 3:2, 2:1 | 856 |
| Module | width | 10 hp | — | 855 |
| Module | current +12V | 120 mA | — | 857 |
| Module | current -12V | 45 mA | — | 857 |

## Behavior

- Program: when encoder turned → selected, not loaded [855]
- Program: when encoder pressed → program loaded [855]
- next: when trigger received → next program loaded [855]
- scan: when each 1V change → shift one program position [855]
- scan: when cable removed → returns to prior selection [855]
- Program change: when new program loading → not instantaneous [855]
- Bank: when card removed → loaded bank stays accessible [855]
- Bank library: when no card present → only spin demo, cancel [855]
- param CV: when slider centered → ±5V sweeps full range [855]
- param CV: when slider at minimum → 10V envelope sweeps range [855]
- Inputs: when single mono signal → adjust both attenuators [855]
- Clip LED: when signal too hot → illuminates [855]
- tap tempo stereo programs: when param 1 receives clock → slider sets threshold [856]
- tap tempo mono programs: when clock patched → right input used [856]
- tap tempo: when bar exceeds range → bar length clipped [856]

## Sources

- [855] Xaoc Timiszoara Operator's Manual (voltage controlled DSP effector) (manual): http://xaocdevices.com/manuals/xaoc_timiszoara_manual.pdf
- [856] Xaoc Timiszoara Program Chart (algorithm reference) (manual): http://xaocdevices.com/manuals/xaoc_timiszoara_program_chart.pdf
- [857] Xaoc Devices Timiszoara product page (product_page): https://xaocdevices.com/main/timiszoara/

Full record as JSON: https://eurorackref.com/xaoc-devices/timiszoara.json
