# Tallin (Xaoc Devices)

Canonical page: https://eurorackref.com/xaoc-devices/tallin/

- id: `xaoc-devices/tallin`
- width: 6 HP; depth: unknown mm
- power: +12 V 50 mA, −12 V 50 mA, +5 V ? mA
- status: current
- functions: VCA, Distortion / Saturation, Exponential / Linear VCA Response

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Signal input a | audio, cv | signal input | -10 to 10 V | unknown | not stated | 429 |
| Expo CV a | cv | exponential gain CV | 0 to 8 V | unknown | 8V | 429 |
| Lin CV a | cv | linear gain CV | 0 to 8 V | unknown | 8V | 429 |
| Signal input b | audio, cv | signal input | -10 to 10 V | unknown | not stated | 429 |
| Expo CV b | cv | exponential gain CV | 0 to 8 V | unknown | 8V | 429 |
| Lin CV b | cv | linear gain CV | 0 to 8 V | unknown | 8V | 429 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Output a | audio, cv | amplified output | unknown | unknown | Channel a | 429 |
| Output b | audio, cv | amplified output | unknown | unknown | Channel b | 429 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Volume a | knob | gain / CV scaling | -80 to 18 dB | Channel a, Expo CV a, Lin CV a | 429 |
| Drive a | switch | overdrive selector | — | Channel a | 429 |
| Volume b | knob | gain / CV scaling | -80 to 18 dB | Channel b, Expo CV b, Lin CV b | 429 |
| Drive b | switch | overdrive selector | — | Channel b | 429 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Volume knob | gain range | -80 to 18 dB | — | 429 |
| Volume knob | gain at center | 0 dB | CV unpatched or 8V | 429 |
| Signal input | typical level | 10 Vpp | — | 429 |
| Signal input | max level | 20 Vpp | — | 429 |
| Signal input | studio level accepted | 4 dBu | — | 429 |
| Output | soft clip threshold | 18 Vpp | — | 429 |
| Op amps | dynamic range | 20 Vpp | — | 429 |
| CV inputs | optimal voltage | 8 V | — | 429 |
| CV inputs | usable envelope range | 5 to 10 V | — | 429 |
| CV inputs | normalization voltage | 8 V | — | 429 |
| Module | width | 6 hp | — | 430 |
| Module | current +12V | 50 mA | — | 430 |
| Module | current -12V | 50 mA | — | 430 |

## Behavior

- VCA: when either CV at 0V → VCA fully closed [429]
- Volume knob: when at minimum → channel silenced regardless CV [429]
- CV inputs: when unpatched → normalled to 8V [429]
- Volume knob: when past center → boost engages [429]
- Expo CV: when 10V envelope, knob centered → compressed response [429]
- Expo CV: when 5V envelope → very quiet output [429]
- CV inputs: when 5V CV → VCA may not open fully [429]
- Output: when exceeds 18Vpp → soft clipping [429]
- Expo CV: when 10V envelope → turn knob to 10 o'clock [429]

## Sources

- [429] Xaoc Tallin Operator's Manual (dual discrete-core VCA with overdrive, Model of 1956) (manual): https://xaocdevices.com/manuals/xaoc_tallin_manual.pdf
- [430] Xaoc Devices Tallin product page (product_page): https://xaocdevices.com/main/tallin/

Full record as JSON: https://eurorackref.com/xaoc-devices/tallin.json
