# POTI II (Xaoc Devices)

Canonical page: https://eurorackref.com/xaoc-devices/poti-ii/

- id: `xaoc-devices/poti-ii`
- width: 4 HP; depth: 32 mm
- power: +12 V 10 mA, −12 V 0 mA, +5 V ? mA
- status: current
- functions: Wavefolder, Pulse Width Modulation

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| shape a | cv | waveform shape modulation | -5 to 5 V | bipolar | — | 1541 |
| shape b | cv | waveform shape modulation | -5 to 5 V | bipolar | — | 1541 |
| shape c | cv | waveform shape modulation | -5 to 5 V | bipolar | — | 1541 |
| shape d | cv | waveform shape modulation | -5 to 5 V | bipolar | — | 1541 |
| Poti expander port | — | Batumi II connection | not stated | not stated | — | 1541 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| channel select | button | select channel(s) | — | attenuators | 1541 |
| frq∙ph∙rto cv | knob | input CV attenuation | — | Batumi II frq∙ph∙rto CV | 1541 |
| sine out | knob | sine output attenuation | — | Batumi II sine out | 1541 |
| asgn out | knob | asgn output amplitude | — | Batumi II asgn out | 1541 |
| shape switch a | switch | shape CV destination | — | shape a, shape modulation | 1541 |
| shape switch b | switch | shape CV destination | — | shape b, shape modulation | 1541 |
| shape switch c | switch | shape CV destination | — | shape c, shape modulation | 1541 |
| shape switch d | switch | shape CV destination | — | shape d, shape modulation | 1541 |

## Modes

- single channel [1541]
- all channels [1541]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 4 HP | — | 1541 |
| module | depth | 32 mm | including cable bracket | 1541 |
| module | +12V current | 10 mA | drawn from Batumi II | 1541 |
| module | -12V current | 0 mA | drawn from Batumi II | 1541 |
| shape | input range | -5 to 5 V | — | 1541 |

## Behavior

- attenuator knob: when position mismatches stored value → waits until moved past [1541]
- attenuator LED: when stored value higher → lit red [1541]
- attenuator LED: when stored value lower → lit green [1541]
- attenuator LED: when values match → unlit [1541]
- Batumi II: when Poti II unplugged → reverts to no attenuation [1541]
- channel select: when channel selected → slider LED red to green [1541]
- settings: when channel switched → remembered, persist power cycle [1541]
- module: when plugged into bus board → must not be [1541]

## Sources

- [1541] xaoc-devices POTI II manual (manual): http://xaocdevices.com/manuals/xaoc_batumi2_poti2_manual_A4.pdf
- [1542] xaoc-devices POTI II product page (product_page): https://xaocdevices.com/main/poti2/

Full record as JSON: https://eurorackref.com/xaoc-devices/poti-ii.json
