# OSTANKINO II (Xaoc Devices)

Canonical page: https://eurorackref.com/xaoc-devices/ostankino-ii/

- id: `xaoc-devices/ostankino-ii`
- width: 8 HP; depth: 31 mm
- power: +12 V 10 mA, −12 V 0 mA, +5 V ? mA
- status: current
- functions: Master Clock

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| random | cv | random play CV | -10 to 10 V | bipolar | — | 1535 |
| slew | cv | slew time CV | -10 to 10 V | bipolar | — | 1535 |
| prob | cv | probability CV | -10 to 10 V | bipolar | — | 1535 |
| transpose | pitch | transpose, 1V/oct | -5 to 5 V | bipolar | — | 1535 |
| range | cv | range CV | -7 to 7 V | bipolar | — | 1535 |
| rate | cv | clock rate CV | -10 to 10 V | bipolar | — | 1535 |
| first step | cv | first step CV | -10 to 10 V | bipolar | — | 1535 |
| last step | cv | last step offset | -10 to 10 V | bipolar | — | 1535 |
| step repeat | gate | step repeat gate | ≤ 5 V | unknown | — | 1535 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| clk | clock | internal clock out | 0 to 5 V | unipolar | clock output | 1535 |
| step trig/bit out 1 | gate, trigger | step 1 gate/bit 0 | 0 to 5 V | unipolar | step outputs | 1535 |
| step trig/bit out 2 | gate, trigger | step 2 gate/bit 1 | 0 to 5 V | unipolar | step outputs | 1535 |
| step trig/bit out 3 | gate, trigger | step 3 gate/bit 2 | 0 to 5 V | unipolar | step outputs | 1535 |
| step trig/bit out 4 | gate, trigger | step 4 gate/bit 3 | 0 to 5 V | unipolar | step outputs | 1535 |
| step trig/bit out 5 | gate, trigger | step 5 gate/bit 4 | 0 to 5 V | unipolar | step outputs | 1535 |
| step trig/bit out 6 | gate, trigger | step 6 gate/bit 5 | 0 to 5 V | unipolar | step outputs | 1535 |
| step trig/bit out 7 | gate, trigger | step 7 gate/bit 6 | 0 to 5 V | unipolar | step outputs | 1535 |
| step trig/bit out 8 | gate, trigger | step 8 gate/bit 7 | 0 to 5 V | unipolar | step outputs | 1535 |
| Leibniz connector | gate | Leibniz Binary Subsystem | unknown | unknown | step outputs | 1535 |

## Bidirectional jacks

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Moskwa II connector | cv | Moskwa II expander link | unknown | unknown | — | 1535 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| step repeat button | button | repeat current step | — | step repeat | 1535 |
| step trig/bit out switch | switch | output mode select | — | step trig/bit out 1, step trig/bit out 2, step trig/bit out 3, step trig/bit out 4, step trig/bit out 5, step trig/bit out 6, step trig/bit out 7, step trig/bit out 8, Leibniz connector | 1535 |

## Modes

- step trig (step trig/bit out switch = step trig) [1535]
- bit out (step trig/bit out switch = bit out) [1535]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 8 HP | — | 1536 |
| module | width | 10 HP | manual spec table | 1535 |
| module | depth | 31 mm | including ribbon cable | 1535 |
| module | +12V current | 10 mA | via Moskwa II | 1535 |
| module | -12V current | 0 mA | via Moskwa II | 1535 |
| module | skiff depth | 25 mm | — | 1536 |
| inputs | CV range | -10 to 10 V | — | 1535 |
| transpose | range | -5 to 5 octaves | — | 1535 |
| transpose | step | 1 semitones | — | 1535 |
| last step | offset per volt | 1 steps | per 1V | 1535 |
| first step | offset per volt | 1 steps | per 1V | 1535 |
| first step | to eighth step | 7 V | — | 1535 |
| outputs 1-8 | range | 0 to 5 V | — | 1535 |
| rate | LFO for full sweep | -5 to 5 V | Moskwa rate knob middle | 1535 |
| rate | CV for full sweep | 0 to 10 V | Moskwa rate knob minimum | 1535 |
| step repeat | recommended gate | 5 V | — | 1535 |

## Behavior

- step repeat: when button held or gate high → current step repeats [1535]
- last step: when 0V → no length change [1535]
- last step: when negative voltage → sequence shortened [1535]
- last step: when positive voltage → sequence lengthened [1535]
- last step: when above eight steps → limited to eight [1535]
- first step: when ±10V → moves first step circularly [1535]
- rate input: when no ext clock → modulates internal clock [1535]
- rate input: when ext clock patched → changes division/multiplication [1535]
- step outputs: when step trig, step inactive → no signal [1535]
- bit outputs: when sequence advances → update to active step [1535]
- Leibniz connector: when step trig position → consecutive step gates [1535]
- module: when Moskwa units chained → controls connected unit only [1535]
- module: when power bus connection → must not connect [1535]

## Sources

- [1535] xaoc-devices OSTANKINO II manual (manual): http://xaocdevices.com/manuals/xaoc_moskwa2_ostankino2_manual_A4.pdf
- [1536] xaoc-devices OSTANKINO II product page (product_page): https://xaocdevices.com/main/ostankino2/

Full record as JSON: https://eurorackref.com/xaoc-devices/ostankino-ii.json
