# LUBLIN (Xaoc Devices)

Canonical page: https://eurorackref.com/xaoc-devices/lublin/

- id: `xaoc-devices/lublin`
- width: 6 HP; depth: 33 mm
- power: +12 V 40 mA, −12 V 20 mA, +5 V ? mA
- status: current
- functions: VCA

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| in a | audio, cv | signal input | unknown | unknown | — | 1527 |
| exp a | cv | exponential CV input | 0 to 8 V | unipolar | +8V | 1527 |
| ping a | trigger, gate | ping trigger input | not stated | unknown | — | 1527 |
| in b | audio, cv | signal input | unknown | unknown | — | 1527 |
| exp b | cv | exponential CV input | 0 to 8 V | unipolar | +8V | 1527 |
| ping b | trigger, gate | ping trigger input | not stated | unknown | — | 1527 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| out a | audio, cv | processed signal output | unknown | unknown | VCA A | 1527 |
| out b | audio, cv | processed signal output | unknown | unknown | VCA B | 1527 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| volume a | knob | level / CV scaling | -90 to 0 dB | VCA A, exp a | 1527 |
| resp a | switch | ping response shape | — | ping envelope A | 1527 |
| volume b | knob | level / CV scaling | -90 to 0 dB | VCA B, exp b | 1527 |
| resp b | switch | ping response shape | — | ping envelope B | 1527 |
| CV saturation trimmer | other | overall/maximum gain | — | VCA A, VCA B | 1527 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 6 HP | — | 1527 |
| module | depth | 33 mm | including cable bracket | 1527 |
| module | +12V current | 40 mA | — | 1527 |
| module | -12V current | 20 mA | — | 1527 |
| in a | input level | 0 to 20 Vpp | — | 1527 |
| out a | output level | 0 to 20 Vpp | — | 1527 |
| exp a | CV range | 0 to 10 V | depends on volume knob | 1527 |
| ping a | minimum trigger length | 4 ms | — | 1527 |
| VCA A | gain range | -90 to 0 dB | exp/ping unpatched | 1527 |
| VCA A | frequency response | 0 to 20000 Hz | ±0.5dB | 1527 |
| VCA A | -3dB bandwidth | 60000 Hz | — | 1527 |
| VCA A | linearity | 0.3 % | — | 1527 |
| level indicator | green range | 0 to 10 Vpp | — | 1527 |
| level indicator | red threshold | 16 Vpp | — | 1527 |

## Behavior

- volume a: when exp and ping unpatched → attenuates input -90..0dB [1527]
- volume a: when CV at exp → acts as CV attenuator [1527]
- exp a: when unpatched, ping unused → normalled to 8V [1527]
- VCA A: when CV zero or negative → VCA shut [1527]
- volume a: when fully down → CV cannot open VCA [1527]
- ping a: when trigger arrives → envelope opens VCA 0dB [1527]
- ping envelope A: when any knob position → not scaled by volume [1527]
- volume a: when ping used, no CV → sets audible decay tail [1527]
- VCA A: when CV plus ping → summed, limited at 0dB [1527]
- VCA A: when CV exceeds unity → gain held at 0dB [1527]
- CV saturation trimmer: when set above 0dB → risk of distortion [1527]
- level indicator: when above 10Vpp → turns yellow [1527]
- level indicator: when above 16Vpp → turns red [1527]

## Sources

- [1527] xaoc-devices LUBLIN manual (manual): http://xaocdevices.com/manuals/xaoc_lublin_manual_A4.pdf
- [1528] xaoc-devices LUBLIN product page (product_page): https://xaocdevices.com/main/lublin/

Full record as JSON: https://eurorackref.com/xaoc-devices/lublin.json
