# JENA (Xaoc Devices)

Canonical page: https://eurorackref.com/xaoc-devices/jena/

- id: `xaoc-devices/jena`
- width: 8 HP; depth: 41 mm
- power: +12 V 95 mA, −12 V 30 mA, +5 V ? mA
- status: current
- functions: Digital / Wavetable Oscillator, Waveshape Morphing, Wavefolder, Trigger / Euclidean Sequencer

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| bank | cv | bank select CV | -5 to 10 V | bipolar | — | 1515 |
| shape | cv | shape select CV | -5 to 10 V | bipolar | — | 1515 |
| phase | cv | phase modulation CV | -5 to 5 V | bipolar | — | 1515 |
| lbz in | — | Leibniz data input | unknown | unknown | — | 1515 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| bit output 0 | gate | data bit 0 | 0 to 5 V | unipolar | Transform engine | 1515 |
| bit output 1 | gate | data bit 1 | 0 to 5 V | unipolar | Transform engine | 1515 |
| bit output 2 | gate | data bit 2 | 0 to 5 V | unipolar | Transform engine | 1515 |
| bit output 3 | gate | data bit 3 | 0 to 5 V | unipolar | Transform engine | 1515 |
| bit output 4 | gate | data bit 4 | 0 to 5 V | unipolar | Transform engine | 1515 |
| bit output 5 | gate | data bit 5 | 0 to 5 V | unipolar | Transform engine | 1515 |
| bit output 6 | gate | data bit 6 | 0 to 5 V | unipolar | Transform engine | 1515 |
| bit output 7 | gate | data bit 7 | 0 to 5 V | unipolar | Transform engine | 1515 |
| lbz out | — | Leibniz data output | unknown | unknown | Transform engine | 1515 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| encoder | knob | bank/shape select | — | Transform engine | 1515 |
| phase | knob | initial waveform phase | — | Transform engine | 1515 |
| link | button | pass processed data | — | lbz out | 1515 |

## Modes

- asynchronous [1515]
- synchronous [1515]
- internal clock [1515]
- external clock [1515]
- fil [1515]
- banks 0-a [1515]
- bank b [1515]
- bank c [1515]
- bank d [1515]
- bank e [1515]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 8 HP | — | 1515 |
| module | depth | 41 mm | including cable and bracket | 1515 |
| module | +12V current | 95 mA | — | 1515 |
| module | -12V current | 30 mA | — | 1515 |
| Transform engine | banks | 15 banks | — | 1515 |
| Transform engine | functions per bank | 256 functions | — | 1515 |
| Transform engine | data resolution | 8 bits | — | 1515 |
| phase | modulation range | 4 cycles | -5V to +5V | 1515 |
| bank e | pattern length | 32 steps | — | 1515 |
| bank e | patterns | 256 patterns | — | 1515 |
| Leibniz data | sample rate | 2 MHz | from Drezno, approx | 1515 |

## Behavior

- link: when unlinked → input passed through unaffected [1515]
- bit outputs: when any link state → processed data available [1515]
- asynchronous regime: when new input value → translated almost instantly [1515]
- synchronous regime: when input ramp analyzed → virtual ramp scans cycle [1515]
- synchronous regime: when abrupt pitch change → short lag [1515]
- synchronous regime: when driving wave shape modulated → pitch artifacts possible [1515]
- internal clock: when selected → data resampled internally [1515]
- fil mode: when selected → smoothing filter engaged [1515]
- bank e: when driven from Drezno → use synchronous regime [1515]
- bank e: when driven from Erfurt/Berlin → use asynchronous regime [1515]
- Leibniz headers: when power plugged → damages module [1515]

## Sources

- [1515] xaoc-devices JENA manual (manual): http://xaocdevices.com/manuals/xaoc_jena_manual_A4.pdf
- [1516] xaoc-devices JENA product page (product_page): https://xaocdevices.com/main/jena/

Full record as JSON: https://eurorackref.com/xaoc-devices/jena.json
