# Batumi (Xaoc Devices)

Canonical page: https://eurorackref.com/xaoc-devices/batumi/

- id: `xaoc-devices/batumi`
- width: 10 HP; depth: 45 mm
- power: +12 V 45 mA, −12 V 15 mA, +5 V ? mA
- status: current
- functions: LFO, Phase-offset outputs, Simultaneous Waveform Outputs, Tempo / Clock Sync, Oscillator Sync, 1V/Oct Pitch Tracking

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| frq/ph/div (Ch1) | cv, pitch | slider parameter CV | -5 to 5 V | bipolar | — | 731 |
| reset/sync (Ch1) | trigger, clock | reset or tempo sync | not stated | not stated | — | 731 |
| frq/ph/div (Ch2) | cv, pitch | slider parameter CV | -5 to 5 V | bipolar | — | 731 |
| reset/sync (Ch2) | trigger, clock | reset or tempo sync | not stated | not stated | — | 731 |
| frq/ph/div (Ch3) | cv, pitch | slider parameter CV | -5 to 5 V | bipolar | — | 731 |
| reset/sync (Ch3) | trigger, clock | reset or tempo sync | not stated | not stated | — | 731 |
| frq/ph/div (Ch4) | cv, pitch | slider parameter CV | -5 to 5 V | bipolar | — | 731 |
| reset/sync (Ch4) | trigger, clock | reset or tempo sync | not stated | not stated | — | 731 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| sine (Ch1) | cv | sine output | -5 to 5 V | bipolar | LFO 1 | 731 |
| saw/asgn (Ch1) | cv | saw or assigned shape | -5 to 5 V | bipolar | LFO 1 | 731 |
| square (Ch1) | cv | square output | -5 to 5 V | bipolar | LFO 1 | 731 |
| sine (Ch2) | cv | sine output | -5 to 5 V | bipolar | LFO 2 | 731 |
| saw/asgn (Ch2) | cv | saw or assigned shape | -5 to 5 V | bipolar | LFO 2 | 731 |
| square (Ch2) | cv | square output | -5 to 5 V | bipolar | LFO 2 | 731 |
| sine (Ch3) | cv | sine output | -5 to 5 V | bipolar | LFO 3 | 731 |
| saw/asgn (Ch3) | cv | saw or assigned shape | -5 to 5 V | bipolar | LFO 3 | 731 |
| square (Ch3) | cv | square output | -5 to 5 V | bipolar | LFO 3 | 731 |
| sine (Ch4) | cv | sine output | -5 to 5 V | bipolar | LFO 4 | 731 |
| saw/asgn (Ch4) | cv | saw or assigned shape | -5 to 5 V | bipolar | LFO 4 | 731 |
| square (Ch4) | cv | square output | -5 to 5 V | bipolar | LFO 4 | 731 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| slider (Ch1) | fader | mode-dependent parameter | — | LFO 1 | 731 |
| slider (Ch2) | fader | mode-dependent parameter | — | LFO 2 | 731 |
| slider (Ch3) | fader | mode-dependent parameter | — | LFO 3 | 731 |
| slider (Ch4) | fader | mode-dependent parameter | — | LFO 4 | 731 |
| central button | button | mode select, zoom | — | LFO sync mode section | 731 |
| reset/sync jumper | jumper | reset vs sync | — | reset/sync (Ch1), reset/sync (Ch2), reset/sync (Ch3), reset/sync (Ch4) | 731 |
| waveform jumpers | jumper | asgn waveform select | — | saw/asgn (Ch1), saw/asgn (Ch2), saw/asgn (Ch3), saw/asgn (Ch4) | 732 |

## Modes

- free [731]
- quad [731]
- phase [731]
- divide [731]
- zoom [731]
- reset (reset/sync jumper = no jumper) [731]
- sync (reset/sync jumper = jumper present) [731]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| slider | frequency | 0.01 to 100 Hz | free mode | 731 |
| LFO | max frequency | 500 Hz | with CV | 731 |
| LFO | min cycle | 53 minutes | with CV | 731 |
| module | longest cycle | 28 hours | voltage controlled divide mode | 731 |
| divide mode | division ratios | 2 to 32 x slower | 2,3,4,8,16,32 | 731 |
| quad mode | phase shift | 90 degrees | 90/180/270 steps | 731 |
| zoom | divide fine offset | 0 to 3 divisions | divide mode | 731 |
| frq/ph/div | input range | -5 to 5 V | — | 731 |
| module | width | 10 hp | — | 732 |
| module | depth | 45 mm | — | 732 |
| module | +12V current | 45 mA | — | 732 |
| module | -12V current | 15 mA | — | 732 |

## Behavior

- waveforms: when above 100Hz → lose precision and amplitude [731]
- mode switch: when modes changed → waveform resets to jumper default [731]
- zoom mode exit: when LED flashing → value/slider mismatch [731]
- reset/sync: when reset mode trigger → cycle restarts (hard sync) [731]
- reset/sync: when sync mode pulses → frequency follows external clock [731]
- reset/sync 2: when synced modes → holds all LFOs [731]
- reset/sync 3: when synced modes → reverses waveform direction [731]
- reset/sync 4: when synced modes → selects next waveform [731]
- zoom mode: when central button pressed → exit zoom [731]
- LFOs 2-4: when quad mode → 90° successive shifts [731]

## Sources

- [731] Xaoc Batumi Operator's Manual (rev. 1974/5.3) (manual): http://xaocdevices.com/manuals/xaoc_batumi_manual.pdf
- [732] Xaoc Batumi product page (product_page): https://xaocdevices.com/main/batumi/

Full record as JSON: https://eurorackref.com/xaoc-devices/batumi.json
