# Zaps (Winter Modular)

Canonical page: https://eurorackref.com/winter-modular/zaps/

- id: `winter-modular/zaps`
- width: 24 HP; depth: unknown mm
- power: +12 V 235 mA, −12 V 93 mA, +5 V ? mA
- status: current
- functions: Complete Voice, Drum Voice, Analog VCO, 1V/Oct Pitch Tracking, Through-Zero FM, Noise Source, Oscillator Sync, Pulse Width Modulation, VCA, Mixer, Highpass Filter

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| TRIG | trigger, gate | trigger slot sound | 0.8 to 10 V | not stated | — | 1949 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| OUT | audio | synth audio output | -4 to 4 V | bipolar | HPF, Mixer | 1949 |

## Bidirectional jacks

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| CV1\|ACC | cv | CV I/O: accent | -5 to 10 V | unknown | — | 1949 |
| CV2\|SLOT | cv | CV I/O: slot select | -5 to 10 V | unknown | — | 1949 |
| CV3\|V/O | cv, pitch | CV I/O: pitch V/O | -5 to 10 V | unknown | — | 1949 |
| CV4\|RND | cv | CV I/O: random | -5 to 10 V | unknown | — | 1949 |
| CV5\|REL | cv | CV I/O: release | -5 to 10 V | unknown | — | 1949 |
| CV6\|ALT | cv | CV I/O: ALT output | -5 to 10 V | unknown | — | 1949 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| COARSE 1 | knob | VCO1 pitch, semitones | — | VCO1, VCO1 | 1949 |
| FINE 1 | knob | VCO1 fine tune | — | VCO1, VCO1 | 1949 |
| COARSE 2 | knob | VCO2 pitch, semitones | — | VCO2, VCO2, FM, VCA2 | 1949 |
| FINE 2 | knob | VCO2 fine tune | — | VCO2, VCO2, AM | 1949 |
| ENV1>P1 | fader | Env 1 pitch amount | 0 to 127 | Envelope 1, VCO1 | 1949 |
| ENV2>P2 | fader | Env 2 pitch amount | 0 to 127 | Envelope 2, VCO2 | 1949 |
| ATTACK 1 | fader | Envelope 1 attack | 0 to 127 | Envelope 1, Envelope 1 | 1949 |
| REL 1 | fader | Envelope 1 release | 0 to 127 | Envelope 1, Envelope 1 | 1949 |
| ATTACK 2 | fader | Envelope 2 attack | 0 to 127 | Envelope 2, Envelope 2 | 1949 |
| REL 2 | fader | Envelope 2 release | 0 to 127 | Envelope 2, Envelope 2 | 1949 |
| AM | fader | VCO2 AM into VCO1 | 0 to 127 | AM, VCO1, AM, Envelope 1 | 1949 |
| FM | fader | VCO2 FM into VCO1 | 0 to 127 | FM, VCO1, FM, Envelope 1 | 1949 |
| XFM | fader | VCO1 FM into VCO2 | 0 to 127 | FM, VCO2, Morph | 1949 |
| V1 MIX | fader | VCO1 level to output | 0 to 127 | VCA1, Mixer, HPF | 1949 |
| V2 MIX | fader | VCO2 level to output | 0 to 127 | VCA2, Mixer, Noise HPF | 1949 |
| RANDOM | fader | master random amount | 0 to 127 | Random, CV6\|ALT | 1949 |
| BANK\|LISTEN | button | bank select / listen | — | Slot buttons | 1949 |
| LAYER | button | fader/pot layer toggle | — | faders, potentiometers | 1949 |
| FUNC | button | function access | — | Slot buttons, BANK\|LISTEN | 1949 |
| 1 | button | slot 1/EDIT GRP | — | Slots | 1949 |
| 2 | button | slot 2/FREEZE | — | Slots | 1949 |
| 3 | button | slot 3/REVERT | — | Slots | 1949 |
| 4 | button | slot 4/SOUND SET | — | Slots | 1949 |
| 5 | button | slot 5/RANDOM | — | Slots | 1949 |
| 6 | button | slot 6/MORPH | — | Slots | 1949 |
| 7 | button | slot 7/COPY | — | Slots | 1949 |
| 8 | button | slot 8/SNAPSHOT | — | Slots | 1949 |
| 9 | button | slot 9/FILE | — | Slots | 1949 |
| 10 | button | slot 10/CV ASSIGN | — | Slots | 1949 |
| 11 | button | slot 11/EXTRA | — | Slots | 1949 |
| 12 | button | slot 12/CONFIG | — | Slots | 1949 |
| Encoder | knob | navigation and data entry | — | menus, last edited parameter | 1949 |
| ACCENT TYPE | menu_setting | accent destination | — | Accent | 1949 |
| ACCENT HEADROOM | menu_setting | accent value difference | -127 to 127 | Accent | 1949 |
| VCO 1 SYNC | menu_setting | wave reset per trigger | — | VCO1 | 1949 |
| VCO 2 SYNC | menu_setting | wave reset per trigger | — | VCO2 | 1949 |
| HOLD 1 CONTROL | menu_setting | Envelope 1 hold source | — | Envelope 1, TRIG | 1949 |
| HOLD 2 CONTROL | menu_setting | Envelope 2 hold source | — | Envelope 2, TRIG | 1949 |
| SLOPE ENV 1 | menu_setting | Envelope 1 curve | — | Envelope 1 | 1949 |
| SLOPE ENV 2 | menu_setting | Envelope 2 curve | — | Envelope 2 | 1949 |
| RETRIGG 1 | menu_setting | Envelope 1 retrigger on | — | Envelope 1 | 1949 |
| RETRIGG 2 | menu_setting | Envelope 2 retrigger on | — | Envelope 2 | 1949 |
| DISTR | menu_setting | retrigger time distribution | — | Envelope 1, Envelope 2 | 1949 |
| RETRIGGERS | menu_setting | retrigger step pattern | — | Envelope 1, Envelope 2 | 1949 |
| I/O | menu_setting | CV jack direction | — | CV jacks | 1949 |
| RANGE | menu_setting | CV jack voltage range | — | CV jacks | 1949 |
| CTRL | menu_setting | CV destination / send | — | CV jacks | 1949 |
| SLOT | menu_setting | CV affected slot | — | CV jacks, Slots | 1949 |
| ATTEN | menu_setting | CV input attenuation | -127 to 0 | CV jacks | 1949 |
| BANK CHANGE | menu_setting | CV input for bank | — | CV jacks, Banks | 1949 |
| TYPE | menu_setting | bank change CV type | — | Banks | 1949 |
| EDIT SLOT | menu_setting | edited slot target | — | Slots | 1949 |
| EDIT BANK | menu_setting | edited bank target | — | Banks | 1949 |
| RANDOMIZE SOUND | menu_setting | randomize current slot | — | Slots | 1949 |
| RANDOMIZE BANK | menu_setting | randomize whole bank | — | Banks | 1949 |
| MUTE SLOTS | menu_setting | mute slots | — | Slots | 1949 |
| FADER | menu_setting | fader takeover | — | faders | 1949 |
| POT | menu_setting | pot takeover | — | potentiometers | 1949 |
| SELFTUNE 1 and 2 | menu_setting | VCO self-tuning | — | VCO1, VCO2 | 1949 |
| FADER RESPONSE | menu_setting | PSU noise filtering | — | faders, potentiometers | 1949 |
| TRIGG DELAY | menu_setting | trigger-to-CV read delay | — | TRIG, CV jacks | 1949 |
| SCREEN SAVER | menu_setting | OLED screen saver | — | OLED | 1949 |
| RESET ACCENT | menu_setting | reset accent defaults | — | Accent | 1949 |
| RESET CV ASSIGN | menu_setting | reset CV defaults | — | CV jacks | 1949 |
| SET BANK SYNC TO ON | menu_setting | bank VCO sync on | — | VCO1, VCO2 | 1949 |
| FINE DETENT | menu_setting | fader/pot calibration | — | faders, potentiometers | 1949 |
| TUNE CV IN | menu_setting | CV input calibration | — | CV jacks | 1949 |

## Modes

- Main [1949]
- Bank selection [1949]
- FUNC [1949]
- Layer 1 [1949]
- Layer 2 [1949]
- Listen [1949]
- EDIT ALL RELATIVE [1949]
- EDIT ALL ABSOLUTE [1949]
- Hold internal [1949]
- Hold external [1949]
- INPUT [1949]
- OUTPUT [1949]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 24 HP | — | 1949 |
| module | +12V current | 235 mA | — | 1949 |
| module | -12V current | 93 mA | — | 1949 |
| Envelope | attack time | 0.2 to 22000 ms | — | 1949 |
| Envelope | release time | 0.3 to 35000 ms | — | 1949 |
| Envelope | hold time | 0 to 1.5 s | — | 1949 |
| TRIG | accepted trigger level | 0.8 to 10 V | — | 1949 |
| OUT | output level | -4 to 4 V | — | 1949 |
| HPF | slope | 6 dB | — | 1949 |
| faders | parameter range | 0 to 127 steps | — | 1949 |
| ACCENT HEADROOM | range | -127 to 127 steps | — | 1949 |
| ACCENT HEADROOM | recommended range | 5 to 30 steps | — | 1949 |
| ACCENT HEADROOM | default | 15 steps | — | 1949 |
| CV ASSIGN ATTEN | range | -127 to 0 steps | — | 1949 |
| BANK CHANGE ATTEN | range | 0 to 127 steps | — | 1949 |
| CV jacks | count | 6 jacks | — | 1949 |
| CV ASSIGN | groups | 12 groups | — | 1949 |
| Project | banks | 12 banks | — | 1949 |
| Bank | sounds/slots | 12 slots | — | 1949 |
| Retrigger | possible retriggers | 12 steps | — | 1949 |
| Retrigger | steps | 0 to 15 steps | — | 1950 |
| TRIGG DELAY | typical working value | 15 ms | — | 1949 |
| SCREEN SAVER | timer | 1 to 60 min | — | 1949 |
| BANK CHANGE CHROMATIC | notes per volt | 12 banks/V | — | 1949 |
| MORPH | morph amount | 0 to 127 steps | — | 1949 |
| COIN SLOT | next/previous chance | 50 % | — | 1949 |
| DRUNKEN SLOT | next/previous chance | 33 % | — | 1949 |
| CV jacks | range | 0 to 10 V | RANGE 0/10 | 1949 |
| CV jacks | range | 0 to 5 V | RANGE 0/5 | 1949 |
| CV jacks | range | -5 to 5 V | RANGE -5/5 | 1949 |
| CV jacks | range | 0 to 8 V | 0/8V option | 1950 |

## Behavior

- TRIG: when trigger received → locks parameters, fires envelopes [1949]
- TRIG: when Hold INTERNAL → trigger length ignored (Hold internal) [1949]
- TRIG: when Hold EXTERNAL → gate length sets hold (Hold external) [1949]
- Hold: when attack longer than gate → no hold occurs (Hold external) [1949]
- Retrigger: when Hold EXTERNAL → hold spans retriggers within gate (Hold external) [1949]
- Retrigger: when Hold INTERNAL → hold repeated each retrigger (Hold internal) [1949]
- Retrigger: when only first retrigger on → two envelopes [1949]
- VCO SYNC: when ON and trigger received → wave reset to midpoint [1949]
- Accent: when ACCENT input high → parameter shifted by HEADROOM [1949]
- Accent: when HEADROOM negative → accented value is lower [1949]
- Listen: when ON → slot buttons trigger sound [1949]
- Listen: when OFF → slot buttons only select [1949]
- Random: when slot triggered → new randomization [1949]
- RANDOM fader: when at 0 → no randomness applied [1949]
- MORPH fader: when 0 → sound of slot A [1949]
- MORPH fader: when 127 → sound of slot B [1949]
- FREEZE: when pressed again → previous capture overwritten [1949]
- FREEZE: when at startup → automatic freeze performed [1949]
- REVERT: when pressed → project restored to freeze [1949]
- EDIT ALL: when entered → bank snapshot taken [1949]
- EDIT ALL: when exited → changes fixed [1949]
- SNAPSHOT: when used → flattens random, CV, morph [1949]
- faders: when Layer 2, ENV1>P1 → fader unassigned, LED off (Layer 2) [1949]
- FADER: when PICK UP → applies once fader reaches value [1949]
- CV inputs: when trigger received → CVs locked at trigger [1949]
- TRIGG DELAY: when set → waits before reading CVs [1949]
- TRIGG DELAY: when too long → accent may be misread [1949]
- SLOT SEL CROM: when attenuation applied → inconsistent slot selection [1949]
- BANK CHANGE: when assigned to CV → overrides that CV, all groups [1949]
- power: when rails not exactly +/-12.00V → some functions may fail [1949]
- Slot: when selected or triggered → button turns white [1949]
- LAYER: when Layer 2 selected → button turns orange (Layer 2) [1949]

## Sources

- [1949] Winter Modular Zaps manual (manual): https://winter-modular.com/wp-content/uploads/2023/03/Zaps-Manual.pdf
- [1950] Winter Modular Zaps product page (product_page): https://winter-modular.com/product/zaps/

Full record as JSON: https://eurorackref.com/winter-modular/zaps.json
