# HV1 (Weston Precision Audio)

Canonical page: https://eurorackref.com/weston-precision-audio/hv1/

- id: `weston-precision-audio/hv1`
- width: 16 HP; depth: 25 mm
- power: +12 V 125 mA, −12 V 45 mA, +5 V ? mA
- status: current
- functions: Analog VCO, Digital / Wavetable Oscillator, Waveshape Morphing, Simultaneous Waveform Outputs, Through-Zero FM, Linear FM, Exponential FM, Oscillator Sync, Pulse Width Modulation, 1V/Oct Pitch Tracking, Wavefolder, Distortion / Saturation, Chord / Paraphonic Oscillator, LFO

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| V/OCT | pitch | pitch CV | not stated | not stated | — | 2044 |
| FM | cv, audio | core FM | not stated | not stated | — | 2044 |
| Sync | audio, gate | core sync | not stated | not stated | — | 2044 |
| PWM | cv | pulse width CV | not stated | not stated | — | 2044 |
| Lin PM | cv, audio | linear phase modulation | not stated | not stated | — | 2044 |
| Morph CV | cv, audio | wavetable morph CV | not stated | not stated | — | 2044 |
| Aux CV | cv | assignable aux CV | 0 to 5 V | unipolar | — | 2044 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Core Triangle | audio | core triangle out | not stated | not stated | Analog Core | 2044 |
| Core Sine | audio | core sine out | not stated | not stated | Analog Core | 2044 |
| Core Sawtooth | audio | core sawtooth out | not stated | not stated | Analog Core | 2044 |
| Core Pulse | audio | core pulse out | not stated | not stated | Analog Core | 2044 |
| Hybrid Triangle | audio | phase-shifted triangle out | not stated | not stated | Digital Phase Shifter | 2044 |
| Hybrid Sine | audio | phase-shifted sine out | not stated | not stated | Digital Phase Shifter | 2044 |
| Hybrid Sawtooth | audio | phase-shifted sawtooth out | not stated | not stated | Digital Phase Shifter | 2044 |
| Hybrid Pulse | audio | phase-shifted pulse out | not stated | not stated | Digital Phase Shifter | 2044 |
| WT | audio | wavetable output | not stated | not stated | Wavetable | 2044 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Encoder | knob | tune / select | — | Analog Core, Detune, Wavetable bank | 2044 |
| Tune/Menu | button | tuning/menu toggle | — | — | 2044 |
| +/Up button | button | octave up / scroll | — | Analog Core | 2044 |
| -/Down button | button | octave down / scroll | — | Analog Core | 2044 |
| Left button | button | VCO/LFO range / page | — | Analog Core | 2044 |
| Right button | button | LFO view / page | — | — | 2044 |
| FM attenuator | knob | FM amount | — | FM, Analog Core | 2044 |
| PW | knob | base pulse width | 0 to 100 % | Analog Core, Digital Phase Shifter, Core Pulse, Hybrid Pulse | 2044 |
| Angle | knob | phase offset | — | Digital Phase Shifter | 2044 |
| PM attenuator | knob | Lin PM amount | — | Lin PM, Digital Phase Shifter | 2044 |
| Morph | knob | WT morph position | — | Wavetable | 2044 |
| Morph CV attenuator | knob | Morph CV amount | — | Morph CV, Wavetable | 2044 |
| FM Type | menu_setting | core FM type | — | FM, Analog Core | 2044 |
| FM Coupling | menu_setting | FM input coupling | — | FM | 2044 |
| Sync Type | menu_setting | core sync type | — | Sync, Analog Core | 2044 |
| Fold Algo | menu_setting | wavefolding algorithm | — | Digital Phase Shifter | 2044 |
| Aux CV routing | menu_setting | Aux CV destination | — | Aux CV | 2044 |
| Triangle octave shift | menu_setting | hybrid triangle +1 octave | — | Hybrid Triangle | 2044 |
| WT octave shift | menu_setting | WT output +1 octave | — | WT | 2044 |
| WT Antialiasing | menu_setting | WT antialiasing on/off | — | WT | 2044 |
| Range | menu_setting | core VCO/LFO range | — | Analog Core | 2044 |
| Detune | menu_setting | digital detune on/off | — | Digital Phase Shifter | 2044 |
| V/oct trim | other | VCO V/oct scale | — | Analog Core | 2044 |
| HF trim | other | VCO high-frequency response | — | Analog Core | 2044 |
| Octave Voltage Trim | other | octave voltage scale | — | Analog Core | 2044 |
| Right Sine Trim | other | hybrid sine shape | — | Hybrid Sine | 2044 |

## Modes

- Tuning screen (Tune/Menu = press) [2044]
- Menu display (Tune/Menu = press) [2044]
- VCO (Left button = press) [2044]
- LFO (Left button = press) [2044]
- Fold (Aux CV routing = Fold) [2044]
- Bitcrush (Aux CV routing = Bitcrush) [2044]
- WT Chord (Aux CV routing = WT Chord) [2044]
- WT Cluster (Aux CV routing = WT Cluster) [2044]
- TZ Linear (FM Type = TZ Linear) [2044]
- Exponential (FM Type = Exponential) [2044]
- Reset (Sync Type = Reset) [2044]
- Reverse (Sync Type = Reverse) [2044]
- Wavetable view [2044]
- Options view (Right button = press) [2044]
- Tuner view (Right button = press) [2044]
- Calibration mode (+/Up button = hold 3 s) [2044]
- Firmware update [2044]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 16 HP | — | 2044 |
| module | depth | 25 mm | to back PCB | 2044 |
| module | depth to power connector | 33 mm | — | 2044 |
| module | +12V current | 125 mA | — | 2044 |
| module | -12V current | 45 mA | — | 2044 |
| Analog Core | tracking range | 8 octaves | — | 2044 |
| Analog Core | tracking error | -2 to 2 cents | — | 2044 |
| Analog Core | octave switch range | 8 octaves | — | 2045 |
| inputs | input impedance | ≥ 100000 ohm | — | 2044 |
| Digital Phase Shifter | DAC resolution | 16 bit | — | 2044 |
| Digital Phase Shifter | DAC sample rate | 150 kHz | — | 2044 |
| Digital Phase Shifter | DAC channels | 2 channels | — | 2044 |
| Wavetable | internal table length | 1024 samples | — | 2044 |
| Wavetable | morph tables | 16 tables | — | 2044 |
| Wavetable | WaveEdit table length | 256 samples | — | 2044 |
| Wavetable | WaveEdit tables per bank | 64 tables | — | 2044 |
| Wavetable | Serum table length | 2048 samples | — | 2044 |
| Digital Phase Shifter | PM range | -720 to 720 degrees | — | 2044 |
| Aux CV | CV range | 0 to 5 V | — | 2044 |
| Aux CV | chord quantize step | 0.083 V | WT Chord | 2044 |
| Wavetable | chord oscillators | 1 to 5 oscillators | WT Chord | 2044 |
| Wavetable | cluster oscillators | 5 oscillators | WT Cluster | 2044 |
| Wavetable | chord types | 35 chords | WT Chord | 2044 |
| Wavetable | max cluster spread | 19 semitones | WT Cluster, Aux CV 5V | 2044 |
| Morph CV | modulation frequency | ≤ 20 kHz | — | 2044 |
| Digital Phase Shifter | detune range | -1 to 1 octaves | detune on | 2044 |
| PW | duty cycle range | 0 to 100 % | — | 2044 |
| Digital Phase Shifter | fold algorithms | 5 algorithms | — | 2044 |
| Analog Core | tuning pot CV | 0 to 7 V | — | 2044 |
| module | max supply voltage | 13.5 V | — | 2044 |

## Behavior

- FM: when any FM type → affects all waveforms [2044]
- Lin PM: when patched → right-side waves only [2044]
- Lin PM: when patched → summed with Angle pot [2044]
- Morph CV: when patched → summed with Morph pot [2044]
- PWM: when patched → summed with PW pot [2044]
- PWM: when patched → both pulse outputs modulated [2044]
- Digital Phase Shifter: when detune off → phase-locked to core (Tuning screen) [2044]
- Digital Phase Shifter: when detune on → detunable about ±1 octave [2044]
- Sync: when rising edge, Reset → core capacitor discharged (Reset) [2044]
- Sync: when rising edge, Reverse → charging direction reverses (Reverse) [2044]
- Aux CV: when WT Chord routing → quantized to 1V/oct steps (WT Chord) [2044]
- Aux CV: when WT Chord routing → WT out only (WT Chord) [2044]
- Aux CV: when 0V, WT Cluster → all 5 oscillators in tune (WT Cluster) [2044]
- Aux CV: when Fold routing → right waves folded (Fold) [2044]
- Aux CV: when Bitcrush routing → right waves bit-crushed (Bitcrush) [2044]
- Wavetable: when empty or no SD card → sine/saw/square/tri morph loaded [2044]
- Wavetable: when bank switch, antialiasing on → few seconds to build [2044]
- Wavetable: when WaveEdit file loaded → shows as four banks [2044]
- Wavetable: when Serum file loaded → 16-table bank interleaved [2044]
- Wavetable: when Serum non-standard header → file may not load [2044]
- Morph: when 0% CV → first table [2044]
- Morph: when 100% CV → 16th table [2044]
- module: when power-up → tuning screen shown [2044]
- Encoder: when tuning locked → core not tuned (Tuning screen) [2044]
- Right button: when Range LFO, tuning screen → toggles LFO waveform view (LFO) [2044]
- +/Up button: when tuner view → octave up/down still work (Tuner view) [2044]
- Firmware update: when more than one BIN → first file found used (Firmware update) [2044]

## Sources

- [2044] Weston Precision Audio HV1 manual (manual): https://www.westonaudio.com/assets/files/hv1manual_r03.pdf
- [2045] Weston Precision Audio HV1 product page (product_page): https://westonaudio.com/hv1.html

Full record as JSON: https://eurorackref.com/weston-precision-audio/hv1.json
