# 2V2 (Weston Precision Audio)

Canonical page: https://eurorackref.com/weston-precision-audio/2v2/

- id: `weston-precision-audio/2v2`
- width: 16 HP; depth: 25 mm
- power: +12 V 115 mA, −12 V 85 mA, +5 V ? mA
- status: current
- functions: Analog VCO, Simultaneous Waveform Outputs, Through-Zero FM, Linear FM, Exponential FM, 1V/Oct Pitch Tracking, Sub Oscillator, LFO, VCA

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| 1V/OCT A | pitch | pitch control | not stated | not stated | — | 1989 |
| FM A | cv, audio | frequency modulation | not stated | not stated | — | 1989 |
| Env In A | cv | FM amount modulation | 0 to 5 V | unipolar | — | 1989 |
| 1V/OCT B | pitch | pitch control | not stated | not stated | 0V | 1989 |
| FM B | cv, audio | frequency modulation | not stated | not stated | — | 1989 |
| Env In B | cv | FM amount modulation | 0 to 5 V | unipolar | — | 1989 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Triangle A | audio | triangle wave | not stated | not stated | VCO A | 1989 |
| Sine A | audio | sine wave | not stated | not stated | VCO A | 1989 |
| Sawtooth A | audio | sawtooth wave | not stated | not stated | VCO A | 1989 |
| Pulse A | audio | pulse wave | not stated | not stated | VCO A | 1989 |
| 1/2f A | audio | sub-octave square | not stated | not stated | VCO A | 1989 |
| Triangle B | audio | triangle wave | not stated | not stated | VCO B | 1989 |
| Sine B | audio | sine wave | not stated | not stated | VCO B | 1989 |
| Sawtooth B | audio | sawtooth wave | not stated | not stated | VCO B | 1989 |
| Pulse B | audio | pulse wave | not stated | not stated | VCO B | 1989 |
| 1/2f B | audio | sub-octave square | not stated | not stated | VCO B | 1989 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Coarse A | knob | coarse tuning | — | VCO A | 1989 |
| Fine A | knob | fine tuning | — | VCO A | 1989 |
| LFO A | button | LFO range toggle | — | VCO A | 1989 |
| Exp TZ Lin A | switch | FM response select | — | FM A, FM VCA A | 1989 |
| FM amount A | knob | FM amount | — | FM VCA A, FM A | 1989 |
| PW A | knob | pulse width | 0 to 100 % | Pulse A | 1989 |
| Coarse B | knob | coarse tuning | — | VCO B | 1989 |
| Fine B | knob | fine tuning | — | VCO B | 1989 |
| LFO B | button | LFO range toggle | — | VCO B | 1989 |
| Exp TZ Lin B | switch | FM response select | — | FM B, FM VCA B | 1989 |
| FM amount B | knob | FM amount | — | FM VCA B, FM B | 1989 |
| PW B | knob | pulse width | 0 to 100 % | Pulse B | 1989 |
| Sync | switch | VCO B sync | — | VCO B | 1989 |
| CVB Jack Normal Jumper | jumper | 1V/OCT B normal | — | 1V/OCT B | 1989 |

## Modes

- LFO A (LFO A = on (LED lit)) [1989]
- Exp FM A (Exp TZ Lin A = Exp) [1989]
- TZ Lin FM A (Exp TZ Lin A = TZ Lin) [1989]
- LFO B (LFO B = on (LED lit)) [1989]
- Exp FM B (Exp TZ Lin B = Exp) [1989]
- TZ Lin FM B (Exp TZ Lin B = TZ Lin) [1989]
- Soft sync (Sync = Soft (up)) [1989]
- Hard sync (Sync = Hard (down)) [1989]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 16 HP | — | 1990 |
| module | depth | 25 mm | prebuilt | 1990 |
| module | depth | 36 mm | DIY through-hole | 1990 |
| module | +12V current | 115 mA | typical | 1989 |
| module | -12V current | 85 mA | typical | 1989 |
| module | +12V current | 125 mA | maximum | 1989 |
| module | -12V current | 95 mA | maximum | 1989 |
| module | supply voltage max | 13.5 V | — | 1989 |
| wave outputs | amplitude | 10 Vpp | nominal | 1989 |
| VCO | tracking range | ≥ 7 octaves | — | 1989 |
| LFO mode | frequency ratio | 0.015 x | — | 1989 |
| Env In | full modulation level | 5 V | — | 1989 |
| Coarse/Fine | tuning ratio | 27 ratio | — | 1989 |
| PW | pulse width | 0 to 100 % | — | 1989 |

## Behavior

- Env In: when above about 5V → FM VCA caps 100% [1989]
- FM amount: when Env In patched → still sets overall amount [1989]
- LFO button: when depressed → LED lit; LFO range [1989]
- Sync: when center position → sync disabled [1989]
- VCO B soft sync: when VCO A positive zero-crossing → triangle reverses [1989]
- VCO B hard sync: when VCO A positive zero-crossing → capacitor discharged to zero [1989]
- 1V/OCT B: when unpatched, jumper 0V → receives 0V [1989]
- 1V/OCT B: when unpatched, jumper CVA → inherits 1V/OCT A [1989]
- CVB jumper: when factory default → 0V option [1989]
- PW: when at noon → 50% square wave [1989]

## Sources

- [1989] Weston Precision Audio 2V2 manual (manual): https://www.westonaudio.com/assets/files/2v2manual_r02.pdf
- [1990] Weston Precision Audio 2V2 product page (product_page): https://www.westonaudio.com/2v2.html

Full record as JSON: https://eurorackref.com/weston-precision-audio/2v2.json
