# fourMulator (Vermona)

Canonical page: https://eurorackref.com/vermona/fourmulator/

- id: `vermona/fourmulator`
- width: 34 HP; depth: 25 mm
- power: +12 V 120 mA, −12 V 10 mA, +5 V ? mA
- status: current
- functions: LFO, Random / Sample & Hold CV, Master Clock, Tempo / Clock Sync, Clock Divider / Multiplier, End-of-Cycle / End-of-Rise Output, Trigger / Euclidean Sequencer, Phase-offset outputs

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| CV 1 | cv | frequency CV | -5 to 5 V | bipolar | — | 1134 |
| RESET 1 | gate, trigger | waveform reset | ≤ 12 V | not stated | — | 1134 |
| CV 2 | cv | frequency CV | -5 to 5 V | bipolar | — | 1134 |
| RESET 2 | gate, trigger | waveform reset | ≤ 12 V | not stated | — | 1134 |
| CV 3 | cv | frequency CV | -5 to 5 V | bipolar | — | 1134 |
| RESET 3 | gate, trigger | waveform reset | ≤ 12 V | not stated | — | 1134 |
| CV 4 | cv | frequency CV | -5 to 5 V | bipolar | — | 1134 |
| RESET 4 | gate, trigger | waveform reset | ≤ 12 V | not stated | — | 1134 |
| CLK IN | clock | external clock input | ≤ 12 V | not stated | — | 1134 |
| RESET (global) | gate, trigger | reset all Modulators | ≤ 12 V | not stated | — | 1134 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| WAVE 1 | cv | selected waveform | -5 to 5 V | bipolar | Modulator 1 | 1134 |
| TRIGGER 1 | trigger | trigger per new cycle | ≤ 12 V | not stated | Modulator 1 | 1134 |
| WAVE 2 | cv | selected waveform | -5 to 5 V | bipolar | Modulator 2 | 1134 |
| TRIGGER 2 | trigger | trigger per new cycle | ≤ 12 V | not stated | Modulator 2 | 1134 |
| WAVE 3 | cv | selected waveform | -5 to 5 V | bipolar | Modulator 3 | 1134 |
| TRIGGER 3 | trigger | trigger per new cycle | ≤ 12 V | not stated | Modulator 3 | 1134 |
| WAVE 4 | cv | selected waveform | -5 to 5 V | bipolar | Modulator 4 | 1134 |
| TRIGGER 4 | trigger | trigger per new cycle | ≤ 12 V | not stated | Modulator 4 | 1134 |
| CLK OUT | clock, trigger | clock output | ≤ 12 V | not stated | clock-generator | 1134 |
| TRIG SEQ | trigger | trigger-sequence output | ≤ 12 V | not stated | trigger-sequence, Modulator 2, Modulator 3, Modulator 4 | 1134 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| WAVE 1 knob | knob | waveform select | — | Modulator 1, WAVE 1 | 1134 |
| SPEED 1 knob | knob | frequency | 0.05 to 100 Hz | Modulator 1 | 1134 |
| SYNC 1 switch | switch | sync mode select | — | Modulator 1 | 1134 |
| WAVE 2 knob | knob | waveform select | — | Modulator 2, WAVE 2 | 1134 |
| SPEED/PHASE 2 knob | knob | frequency / phase | 0.05 to 100 Hz | Modulator 2 | 1134 |
| SYNC 2 switch | switch | sync mode select | — | Modulator 2 | 1134 |
| WAVE 3 knob | knob | waveform select | — | Modulator 3, WAVE 3 | 1134 |
| SPEED/PHASE 3 knob | knob | frequency / phase | 0.05 to 100 Hz | Modulator 3 | 1134 |
| SYNC 3 switch | switch | sync mode select | — | Modulator 3 | 1134 |
| WAVE 4 knob | knob | waveform select | — | Modulator 4, WAVE 4 | 1134 |
| SPEED/PHASE 4 knob | knob | frequency / phase | 0.05 to 100 Hz | Modulator 4 | 1134 |
| SYNC 4 switch | switch | sync mode select | — | Modulator 4 | 1134 |
| TAP | button | tap tempo | — | clock-generator | 1134 |

## Modes

- OFF (SYNC switch = OFF) [1134]
- SYNC (SYNC switch = SYNC) [1134]
- CLK (SYNC switch = CLK) [1134]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Modulator | frequency range | 0.05 to 100 Hz | — | 1134 |
| Modulator | longest period | 20 s | — | 1135 |
| SPEED/PHASE | phase shift | 0 to 180 degrees | SYNC mode | 1134 |
| SPEED | clock division settings | 8 settings | CLK mode | 1134 |
| clock division 1/1 | rate | 0.25 x incoming clock | quarter-note clock | 1134 |
| clock division 1/16 | rate | 4 x incoming clock | quarter-note clock | 1134 |
| clock division 1/32 | rate | 8 x incoming clock | quarter-note clock | 1134 |
| WAVE knob | waveforms | 6 waveforms | — | 1134 |
| TAP | taps for tempo change | 4 taps | — | 1134 |
| module | current +12V | 120 mA | — | 1134 |
| module | current -12V | 10 mA | — | 1134 |
| module | width | 34 HP | — | 1134 |
| module | depth | 25 mm | — | 1134 |
| module | weight | 365 g | — | 1134 |

## Behavior

- Modulator 1: when SYNC switch → OFF and CLK only [1134]
- Modulator 2-4: when SYNC position → follows left neighbor's speed [1134]
- SPEED/PHASE: when SYNC position → sets phase 0-180 degrees (SYNC) [1134]
- SPEED: when CLK position → selects clock division (CLK) [1134]
- CV input: when SYNC or CLK active → modulates phase or division [1134]
- CV input: when pushes beyond 100 Hz → frequency limited to 100 Hz [1134]
- RESET: when trigger/gate received → waveform restarts at start [1134]
- global RESET: when Modulator RESET patched → that Modulator ignores global [1134]
- CLK IN: when patched → internal clock disconnected from Modulators [1134]
- CLK OUT: when CLK IN patched → still outputs internal clock [1134]
- internal clock: when CLK IN unpatched → resumes previous tempo [1134]
- tempo setting: when power off → lost [1134]
- TAP: when tapped four times → tempo changes [1134]
- TRIG SEQ: when no Modulator 2-4 synced → inactive [1134]
- TRIG SEQ: when several Modulators synced → triggers combined per division [1134]
- synced Modulators: when SPEED LEDs → flash with phase delay [1134]

## Sources

- [1134] Vermona fourMulator User Manual (EN) (manual): https://www.vermona.com/fileadmin/user_upload/products/fourmulator/downloads/fourmulator_manual_en.pdf
- [1135] Vermona fourMulator product page (product_page): https://www.vermona.com/en/products/modules/product/fourmulator/

Full record as JSON: https://eurorackref.com/vermona/fourmulator.json
