# Z2040 (Tiptop Audio)

Canonical page: https://eurorackref.com/tiptop-audio/z2040/

- id: `tiptop-audio/z2040`
- width: 8 HP; depth: 42 mm
- power: +12 V 20 mA, −12 V 20 mA, +5 V ? mA
- status: current
- functions: Lowpass Filter, Self-Oscillating Filter, VCA, Distortion / Saturation

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| IN | audio | audio input | not stated | not stated | — | 822 |
| FM | cv, audio | cutoff modulation input | -2.5 to 2.5 V | bipolar | — | 822 |
| VC-FM | cv, audio | FM magnitude control | -2.5 to 2.5 V | bipolar | — | 822 |
| VC-RES | cv, audio | resonance CV input | -2.5 to 2.5 V | bipolar | — | 822 |
| VC-GAIN | cv, audio | audio VCA CV | ≤ 5 V | unknown | — | 822 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| OUT | audio | filter output | not stated | not stated | filter core, audio VCA | 822 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| GAIN | knob | input gain | — | gain stage, filter core | 822 |
| RESONANCE | knob | resonance; VC-RES offset | — | filter core, VC-RES | 822 |
| FREQUENCY | knob | cutoff frequency | — | filter core | 822 |
| FM | knob | FM input attenuator | — | FM | 822 |
| VC-FM | knob | VC-FM input attenuator | — | VC-FM | 822 |
| TOP jumper | jumper | VCA position config | — | audio VCA | 822 |

## Modes

- Input VCA (TOP jumper = Input VCA) [822]
- Output VCA (TOP jumper = Output VCA) [822]
- VCA disable (TOP jumper = removed) [822]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| filter core | slope | 24 dB/oct | — | 823 |
| filter core | poles | 4 poles | — | 822 |
| self-oscillation | tracking range | 7 octaves | MOTU Volta calibration | 822 |
| OUT | max output level | 21 Vp-p | gain past 0db, max resonance | 822 |
| filter core | clipping input level | 10 Vp-p | gain past 0db | 822 |
| IN | impedance at max gain | 10000 ohm | maximum gain | 822 |
| module | width | 8 HP | — | 823 |
| module | depth | 42 mm | — | 823 |
| module | +12V current | 20 mA | — | 823 |
| module | -12V current | 20 mA | — | 823 |

## Behavior

- audio VCA: when configured at output, no CV → blocks sound (Output VCA) [822]
- audio VCA: when configured at input → mixed with gain-knob audio (Input VCA) [822]
- GAIN: when VCA at output → affects input only (Output VCA) [822]
- input level: when resonance up, gain below 0db → drops [822]
- input level: when gain at 0db, resonance up → gain compensated [822]
- output level: when gain past 0db, resonance up → increases, hard clipping [822]
- filter core: when gain past 0db, 10Vp-p input → soft clipping [822]
- filter core: when no input, resonance max → sine oscillation [822]
- VCA: when TOP jumper removed → disabled (VCA disable) [822]

## Sources

- [822] Tiptop Audio Z2040 VC-Filter v.2 Manual (manual): https://www.tiptopaudio.com/manuals/Tiptop_Audio_z2040v2.pdf
- [823] Tiptop Audio Z2040 product page (product_page): https://tiptopaudio.com/z2040/

Full record as JSON: https://eurorackref.com/tiptop-audio/z2040.json
