# CP909 (Tiptop Audio)

Canonical page: https://eurorackref.com/tiptop-audio/cp909/

- id: `tiptop-audio/cp909`
- width: unknown HP; depth: unknown mm
- power: +12 V ? mA, −12 V ? mA, +5 V ? mA
- status: current
- functions: Drum Voice

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| GATE IN | gate, trigger | gate input | not stated | not stated | — | 1935 |
| accent input | gate, trigger, cv | accent input | not stated | not stated | GATE IN | 1935 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| CLAP OUT | audio | clap output | not stated | not stated | clap sound generator | 1935 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| LEVEL | knob | output volume | — | CLAP OUT | 1935 |
| ACCENT | knob | accent level | — | accent input, internal envelope | 1935 |
| TRASH | knob | noise generator speed | — | noise generator | 1935 |
| trimmer | other | clap / reverb balance | — | clap sound generator, clap reverb | 1935 |

## Behavior

- accent input: when unpatched → normalled from GATE IN [1935]
- ACCENT: when accent input unpatched → fine output gain control [1935]
- accent input: when patched → breaks gate normalling [1935]
- accent input: when patched, no accent signal → minimum internal accent level [1935]
- accent input: when gate or CV hits → louder per ACCENT setting [1935]
- accent: when applied → louder, slightly more attack [1935]
- TRASH: when fully CW → original TR-909 clap [1935]
- TRASH: when turned down → noise clock slows, trashed [1935]
- TRASH: when clock speed decreased → volume increases [1935]

## Sources

- [1935] Tiptop Audio CP909 manual (manual): https://www.tiptopaudio.com/manuals/Tiptop_Audio_CP909_ns.pdf

Full record as JSON: https://eurorackref.com/tiptop-audio/cp909.json
