# Buchla 285t (Tiptop Audio)

Canonical page: https://eurorackref.com/tiptop-audio/buchla-285t/

- id: `tiptop-audio/buchla-285t`
- width: 18 HP; depth: 45 mm
- power: +12 V 50 mA, −12 V 44 mA, +5 V ? mA
- status: current
- functions: Pitch Shifter / Frequency Shifter, Ring Modulator

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| FS signal in | audio | audio to shift | not stated | not stated | — | 1934 |
| FS ref. in | audio | external oscillator reference | not stated | not stated | — | 1934 |
| FS control in | cv | INT oscillator CV | not stated | not stated | — | 1934 |
| FM in | audio | audio FM to INT | not stated | not stated | — | 1934 |
| BM signal in | audio | carrier input | not stated | not stated | — | 1934 |
| BM ref. in | audio | modulator input | not stated | not stated | — | 1934 |
| BM control in | cv | modulation sweep CV | not stated | not stated | — | 1934 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| difference 1 | audio | difference shift | not stated | not stated | Frequency Shifter | 1934 |
| difference 2 | audio | difference shift | not stated | not stated | Frequency Shifter | 1934 |
| sum 1 | audio | sum shift | not stated | not stated | Frequency Shifter | 1934 |
| sum 2 | audio | sum shift | not stated | not stated | Frequency Shifter | 1934 |
| ring 1 | audio | pure ring modulation | not stated | not stated | Balanced Modulator | 1934 |
| ring 2 | audio | pure ring modulation | not stated | not stated | Balanced Modulator | 1934 |
| variable 1 | audio | variable modulation output | not stated | not stated | Balanced Modulator, MODULATION | 1934 |
| variable 2 | audio | variable modulation output | not stated | not stated | Balanced Modulator, MODULATION | 1934 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| INT frequency | knob | INT oscillator frequency | 0 to 1 kHz | INT oscillator | 1934 |
| REFERENCE switch | switch | INT or ref. | — | Frequency Shifter | 1934 |
| FS control attenuverter | knob | control CV amount | — | FS control in | 1934 |
| F. M. attenuator | knob | FM amount | — | FM in | 1934 |
| MODULATION | knob | zero to ring sweep | — | variable 1, variable 2 | 1934 |
| BM control attenuverter | knob | control CV amount | — | BM control in | 1934 |

## Modes

- INT (REFERENCE switch = INT.) [1934]
- ref. (REFERENCE switch = ref.) [1934]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 18 HP | — | 1934 |
| module | depth | 45 mm | — | 1934 |
| module | +12V current | 50 mA | — | 1934 |
| module | -12V current | 44 mA | — | 1934 |
| INT oscillator | frequency range | 0 to 1 kHz | — | 1934 |

## Behavior

- Frequency Shifter: when REFERENCE switch at INT. → shifts with internal oscillator (INT) [1934]
- Frequency Shifter: when REFERENCE switch at ref. → shifts with ref. input (ref.) [1934]
- FS control in: when patched → affects INT oscillator only (INT) [1934]
- FM in: when patched → modulates INT oscillator (INT) [1934]
- MODULATION: when at zero → pure incoming signal [1934]
- MODULATION: when fully CW to ring → same as ring outputs [1934]
- BM control in: when patched → modulates sweep from zero [1934]
- ring outputs: when always → pure ring of signal, ref. [1934]

## Sources

- [1934] Tiptop Audio Buchla 285t manual (manual): https://tiptopaudio.com/manuals/Buchla_%26_Tiptop_Audio_285t.pdf

Full record as JSON: https://eurorackref.com/tiptop-audio/buchla-285t.json
