# Buchla 242t (Tiptop Audio)

Canonical page: https://eurorackref.com/tiptop-audio/buchla-242t/

- id: `tiptop-audio/buchla-242t`
- width: 16 HP; depth: 45 mm
- power: +12 V 130 mA, −12 V 19 mA, +5 V ? mA
- status: current
- functions: Master Clock, Trigger / Euclidean Sequencer, Tempo / Clock Sync

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| CLK IN | clock | external clock | not stated | unknown | — | 1928 |
| RST IN | trigger | reset end stage | not stated | unknown | — | 1928 |
| start | trigger | start internal clock | not stated | unknown | — | 1928 |
| stop | trigger | stop internal clock | not stated | unknown | — | 1928 |
| PERIOD | cv | period CV | not stated | unknown | — | 1928 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| ALL OUT | trigger, clock | continuous pulse train | not stated | unknown | pulser | 1928 |
| MATRIX | trigger | programmed pulse patterns | not stated | unknown | pulse matrix | 1928 |
| ALTER 1 | trigger | alternating pulses | not stated | unknown | — | 1928 |
| ALTER 2 | trigger | alternating pulses | not stated | unknown | — | 1928 |
| RAMP | cv | continuous ramp wave | not stated | not stated | pulser | 1928 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| PERIOD attenuverter | knob | period CV amount | — | PERIOD, pulser | 1928 |
| PERIOD offset | knob | internal clock period | 0.002 to 10 s | pulser | 1928 |
| stop | button | manual stop | — | pulser | 1928 |
| single pulse | button | manual single pulse | — | pulser, pulse matrix | 1928 |
| start | button | manual start | — | pulser | 1928 |
| row encoder | knob | scroll vertical rows | — | pulse matrix | 1928 |
| column encoder | knob | scroll horizontal rows | — | pulse matrix | 1928 |
| on/off | button | set/clear pulse point | — | pulse matrix | 1928 |
| pulse length jumper | jumper | pulse length | — | ALL OUT, MATRIX, ALTER 1, ALTER 2 | 1928 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 16 HP | — | 1928 |
| module | depth | 45 mm | — | 1928 |
| module | +12V current | 130 mA | — | 1928 |
| module | -12V current | 19 mA | — | 1928 |
| PERIOD offset | period per stage | 0.002 to 10 s | — | 1928 |
| pulse length | pulse width | 1 ms | jumper Long | 1928 |
| pulse matrix | stages | 12 stages | — | 1928 |
| pulse matrix | rows | 4 rows | — | 1928 |

## Behavior

- ALL OUT: when any matrix programming → continuous pulse train [1928]
- RAMP, ALL OUT: when CLK IN active → stay on internal clock [1928]
- RST IN: when pulse received → resets end stage [1928]
- start: when pulse received → starts internal clock [1928]
- stop: when pulse received → stops internal clock [1928]
- pulse length: when jumper Short → internal or CLK width [1928]
- pulse length: when jumper Long → fixed 1 ms [1928]
- on/off: when long press → clears matrix [1928]
- PERIOD: when CV applied → increases or decreases rate [1928]

## Sources

- [1928] Tiptop Audio Buchla 242t manual (manual): https://tiptopaudio.com/manuals/Buchla_%26_Tiptop_Audio_242t.pdf

Full record as JSON: https://eurorackref.com/tiptop-audio/buchla-242t.json
