# E440 Discrete OTA VCF (Synthesis Technology)

Canonical page: https://eurorackref.com/synthesis-technology/e440/

- id: `synthesis-technology/e440`
- width: 14 HP; depth: 32 mm
- power: +12 V 23 mA, −12 V 23 mA, +5 V ? mA
- status: current
- functions: Lowpass Filter, Simultaneous Multimode Outputs, Self-Oscillating Filter, Analog VCO, 1V/Oct Pitch Tracking

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| AUDIO IN | audio | filter signal input | not stated | unknown | — | 415 |
| 1V/Oct | cv, pitch | filter frequency 1V/oct | -5 to 5 V | unknown | — | 416 |
| FM1 | cv | filter frequency modulation | -5 to 5 V | unknown | — | 415 |
| FM2 | cv | filter frequency modulation | -5 to 5 V | unknown | — | 415 |
| Res CV | cv | resonance modulation input | 0 to 5 V | unipolar | — | 416 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| 2 Pole Out | audio | -12dB/oct lowpass output | -7 to 7 V | unknown | OTA VCF | 416 |
| 3 Pole Out | audio | -18dB/oct lowpass output | -7 to 7 V | unknown | OTA VCF | 416 |
| 4 Pole Out | audio | -24dB/oct lowpass output | -7 to 7 V | unknown | OTA VCF | 416 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| RESONANCE | knob | filter resonance amount | — | OTA VCF, Res CV | 415 |
| FM1 | knob | FM1 standard attenuator | — | FM1 | 415 |
| FM2 | knob | FM2 reversing attenuator | — | FM2 | 415 |
| FREQUENCY | knob | cutoff frequency | 20 to 18000 Hz | OTA VCF | 415 |
| DRIVE | knob | input attenuator / booster | — | AUDIO IN, OTA VCF | 415 |
| JP1 | jumper | bass boost enhancement | — | OTA VCF | 415 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| FREQUENCY | cutoff range | 20 to 18000 Hz | — | 415 |
| 2 Pole Out | slope | -12 dB/oct | — | 415 |
| 3 Pole Out | slope | -18 dB/oct | — | 415 |
| 4 Pole Out | slope | -24 dB/oct | — | 415 |
| self-oscillation | 1V/oct tracking range | 4 octaves | — | 415 |
| outputs | phase shift between outputs | 45 degrees | — | 415 |
| DRIVE | booster gain | 2 x | — | 415 |
| DRIVE | overdriven output swing | 14 Vpp | — | 415 |
| CV inputs | input range | -5 to 5 V | — | 415 |
| CV inputs | bandwidth | 0 to 10000 Hz | — | 415 |
| Res CV | input range | 0 to 5 V | — | 415 |
| AUDIO IN | input impedance | 50000 ohm | — | 415 |
| AUDIO IN | input level | 0.1 to 14 Vpp | — | 415 |
| outputs | frequency range | 20 to 18000 Hz | — | 415 |
| module | width | 14 HP | — | 416 |
| module | depth | 32 mm | — | 416 |
| power | +12V current | 23 mA | — | 415 |
| power | -12V current | 23 mA | manual; product page says 12mA | 415 |

## Behavior

- RESONANCE: when knob at ~9 tick → filter self-resonates [415]
- RESONANCE: when Res CV patched → knob added to CV [415]
- FM2: when knob at 12:00 → maximum attenuation [415]
- FM2: when turned CCW → adds inverted CV [415]
- FM2: when turned CW → adds applied CV [415]
- DRIVE: when knob at ~4 tick → unity gain [415]
- DRIVE: when turned high → overdrives to clipping [415]
- Res CV: when 0V → no resonance [415]
- Res CV: when +5V → full resonance [415]

## Sources

- [415] E440 Discrete OTA VCF Manual (manual): https://synthtech.com/docs/E440_manual.pdf
- [416] Synthesis Technology E440 product page (product_page): https://synthtech.com/eurorack/E440/

Full record as JSON: https://eurorackref.com/synthesis-technology/e440.json
