# Steady State Gate Stereo Field (Steady State Fate)

Canonical page: https://eurorackref.com/steady-state-fate/steady-state-gate-stereo-field/

- id: `steady-state-fate/steady-state-gate-stereo-field`
- width: 10 HP; depth: 23 mm
- power: +12 V 120 mA, −12 V 120 mA, +5 V ? mA
- status: current
- functions: Lowpass Gate, Lowpass Filter, Bandpass / Notch Filter, Multimode Filter, Wavefolder, Distortion / Saturation, Stereo Panning, Stereo Inputs / Outputs

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| IN-L | audio | left audio input | not stated | not stated | — | 1916 |
| IN-R | audio | right audio input | not stated | not stated | — | 1916 |
| EXCITE | trigger, gate | pluck trigger | 0 to 5 V | unknown | — | 1916 |
| CV/GATE | gate, cv | LPG opening CV | 0 to 5 V | unknown | — | 1916 |
| DECAY (CV) | cv | decay time CV | not stated | not stated | — | 1916 |
| FREQ (CV) | cv | frequency CV | not stated | not stated | — | 1916 |
| Q-FCTR | cv | Q-factor CV | not stated | not stated | — | 1916 |
| TIMBRE (CV) | cv | timbre amount CV | not stated | not stated | — | 1916 |
| FIELD (CV) | cv | stereo field CV | not stated | not stated | — | 1916 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| OUT-L | audio | left output | not stated | not stated | FIELD, Low-Pass Gate | 1916 |
| OUT-R | audio | right output | not stated | not stated | FIELD, Low-Pass Gate | 1916 |
| ENV OUT | cv | envelope output | not stated | not stated | pluck conditioner, Low-Pass Gate | 1916 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| DECAY | fader | LPG decay time | — | Low-Pass Gate, pluck conditioner | 1916 |
| TIMBRE | fader | timbre effect amount | — | TIMBRE | 1916 |
| FREQ | fader | filter base frequency | — | VCF, Low-Pass Gate | 1916 |
| Q-FACTOR | knob | resonance | — | VCF | 1916 |
| FIELD | knob | stereo field / tone | — | FIELD, OUT-L, OUT-R | 1916 |
| TIMBRE mode switch | switch | timbre mode | — | TIMBRE | 1916 |
| QAOS switch | switch | QAOS on/off | — | VCF, Q-FACTOR | 1916 |
| filter type switch | switch | filter type | — | VCF | 1916 |
| FIELD type switch | switch | FIELD type | — | FIELD | 1916 |

## Modes

- VCF [1916]
- LPG [1916]
- FOLD (TIMBRE mode switch = FOLD) [1916]
- SAT (TIMBRE mode switch = SAT) [1916]
- QAOS (TIMBRE mode switch = QAOS) [1916]
- BP (filter type switch = BP) [1916]
- 1PLP (filter type switch = 1PLP) [1916]
- 2PLP (filter type switch = 2PLP) [1916]
- NEAR (FIELD type switch = NEAR) [1916]
- FAR (FIELD type switch = FAR) [1916]
- stereo [1916]
- mono [1916]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 10 HP | — | 1917 |
| module | depth | 23 mm | — | 1917 |
| module | +12V current | 120 mA | — | 1917 |
| module | -12V current | 120 mA | — | 1917 |
| 1PLP | slope | -6 dB/oct | — | 1916 |
| 2PLP | slope | -12 dB/oct | — | 1916 |
| BP | poles | 2 poles | — | 1916 |
| EXCITE, CV/GATE | best input range | 0 to 5 V | — | 1916 |
| FREQ | minimum for full opening | 75 % | 5V at EXCITE or CV/GATE | 1916 |

## Behavior

- module: when no EXCITE or CV/GATE signal → functions as VCF [1916]
- DECAY: when EXCITE and CV/GATE unpatched → inactive [1916]
- DECAY: when slider moved up → longer decay [1916]
- EXCITE: when very short triggers → lower LPG intensity [1916]
- EXCITE and CV/GATE: when both patched → both open LPG [1916]
- FREQ: when control input used → sets maximum opening frequency [1916]
- FREQ: when 5V control signal → needs ≥75% to fully open [1916]
- TIMBRE CV: when sufficiently negative, FOLD/SAT → ducks output level [1916]
- TIMBRE slider: when bipolar CV applied → offsets ducking [1916]
- Q-FACTOR: when beyond sine symbol → ringing may sustain [1916]
- QAOS: when QAOS active → limits Q-FACTOR range [1916]
- QAOS switch: when set OFF → QAOS off in all modes [1916]
- FIELD: when center M, stereo → outputs carry mono mix (stereo) [1916]
- FIELD: when ST or -ST → normal or reversed stereo (stereo) [1916]
- FIELD: when center, mono → flat tone (mono) [1916]
- FIELD: when NEAR, mono → hi cut/boost (mono) [1916]
- FIELD: when FAR, ST to CW → hi boost, low cut (mono) [1916]
- FIELD: when FAR, -ST to CCW → hi-mid cut, upper hi boost (mono) [1916]
- mono mixing: when two inputs, one output → set FIELD FAR [1916]
- mono mixing: when FIELD not FAR → extra clipping possible [1916]
- saturation: when high stereo input levels → comes on sooner, stronger [1916]
- centered sources: when FIELD adjusted → do not pan [1916]
- summing to mono: when input levels high → drive and level increase [1916]

## Sources

- [1916] Steady State Fate Steady State Gate Stereo Field manual (manual): https://cdn.shopify.com/s/files/1/0616/1206/4946/files/SSGSF_Quick_start.pdf?v=1761051015
- [1917] Steady State Fate Steady State Gate Stereo Field product page (product_page): https://steadystatefate.com/products/steady-state-gate-stereo-field

Full record as JSON: https://eurorackref.com/steady-state-fate/steady-state-gate-stereo-field.json
