# Rample (Squarp Instruments)

Canonical page: https://eurorackref.com/squarp-instruments/rample/

- id: `squarp-instruments/rample`
- width: 14 HP; depth: 25 mm
- power: +12 V 220 mA, −12 V 40 mA, +5 V ? mA
- status: current
- functions: Sample Player, Distortion / Saturation, Lowpass Filter, Highpass Filter, Compressor / Dynamics, Freeze / Hold, Mixer, Polyphonic Operation, 1V/Oct Pitch Tracking, Stereo Inputs / Outputs

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| gate input 1 | gate, trigger | trigger SP1 | not stated | not stated | — | 265 |
| gate input 2 | gate, trigger | trigger SP2 | not stated | not stated | — | 265 |
| gate input 3 | gate, trigger | trigger SP3 | not stated | not stated | — | 265 |
| gate input 4 | gate, trigger | trigger SP4 | not stated | not stated | — | 265 |
| CV input 1 | cv, pitch, gate | assignable parameter CV | -5 to 5 V | bipolar | — | 265 |
| CV input 2 | cv, pitch, gate | assignable parameter CV | -5 to 5 V | bipolar | — | 265 |
| CV input 3 | cv, pitch, gate | assignable parameter CV | -5 to 5 V | bipolar | — | 265 |
| CV input 4 | cv, pitch, gate | assignable parameter CV | -5 to 5 V | bipolar | — | 265 |
| MIDI In | midi | MIDI TRS type A | not stated | not stated | — | 266 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| SP1 | audio, cv | voice 1 audio | -5 to 5 V | bipolar | SP1, Compressor | 265 |
| SP2 | audio, cv | voice 2 audio | -5 to 5 V | bipolar | SP2, Compressor | 265 |
| SP3 | audio, cv | voice 3 audio | -5 to 5 V | bipolar | SP3, Compressor | 265 |
| SP4 | audio, cv | voice 4 audio | -5 to 5 V | bipolar | SP4, Compressor | 265 |
| mix | audio | mix of unpatched voices | not stated | not stated | mix bus | 265 |
| MIDI Thru | midi | MIDI thru for chaining | not stated | not stated | MIDI In | 266 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| potentiometer 1 | knob | SP1 effect amount | — | SP1 | 265 |
| potentiometer 2 | knob | SP2 effect amount | — | SP2 | 265 |
| potentiometer 3 | knob | SP3 effect amount | — | SP3 | 265 |
| potentiometer 4 | knob | SP4 effect amount | — | SP4 | 265 |
| ① | button | select Pitch / voice | — | Pitch effect | 265 |
| ② | button | select Bits / voice | — | Bits effect | 265 |
| ③ | button | select Filter / voice | — | Filter effect | 265 |
| ④ | button | select Freeze / voice | — | Freeze effect | 265 |
| assign | button | CV assign / shift | — | CV input 1, CV input 2, CV input 3, CV input 4 | 265 |
| listen | button | audition / exit | — | SP1, SP2, SP3, SP4 | 265 |
| encoder | knob | kit select / menu | — | SP1, SP2, SP3, SP4 | 265 |
| start point | menu_setting | sample start | 0 to 100 % | SP1 | 265 |
| length | menu_setting | sample duration | 0 to 100 % | SP1 | 265 |
| env | menu_setting | attack / decay | — | SP1 | 265 |
| run mode | menu_setting | playback type | — | SP1 | 265 |
| CV IN | menu_setting | CV input range | — | CV input 1 | 265 |
| SLICER | menu_setting | start/length quantizing | — | start point, length | 265 |
| LAYER | menu_setting | default layer mode | — | SP1 | 265 |
| ANTICLIC | menu_setting | start/stop click fade | — | SP1 | 265 |
| PITCH | menu_setting | chromatic pitch quantize | — | Pitch effect | 265 |
| COMPRESS | menu_setting | compressor preset | — | Compressor | 265 |
| % COMPRESS | menu_setting | compressor amount | 0 to 200 % | Compressor | 265 |
| SIDECHAIN | menu_setting | compressor sidechain voice | — | Compressor | 265 |
| TAPE | menu_setting | tape amount | 0 to 127 | Tape | 265 |
| ASSIGN | menu_setting | CV assign scope | — | CV input 1 | 265 |
| Punch | menu_setting | punch effects mode | — | listen | 265 |

## Modes

- Kit Select [265]
- Assign Mode (assign = press) [265]
- layers mode [265]
- Momentary Mode [265]
- Chromatic Mode [265]
- CHORD MIDI MODE [265]
- Layers Mode [265]
- Punch effects [265]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Pitch effect | range | -1 to 1 octaves | — | 265 |
| CV input | V/oct pitch range | 24 semitones | V/oct assignment | 265 |
| CV input | linear pitch | -50 to 100 % | Pitch assignment, -5V to +5V | 265 |
| kits | banks | 26 banks | — | 265 |
| kits | kits per bank | 100 kits | — | 265 |
| kits | max kits | 2600 kits | — | 266 |
| voice | max layers | 12 samples | — | 265 |
| samples | sample rate | 44100 Hz | — | 265 |
| samples | bit depth | 8 to 16 bit | — | 265 |
| samples | minimum length | 50 ms | — | 265 |
| Compressor | amount | 0 to 200 % | — | 265 |
| Compressor | presets | 9 presets | — | 265 |
| Tape | amount | 0 to 127 steps | — | 265 |
| MIDI | note trigger range | 0 to 127 notes | — | 265 |
| DAC | resolution | 16 bit | — | 266 |
| DAC | sample rate | 44.1 kHz | — | 266 |
| ADC | CV input resolution | 12 bit | — | 266 |
| module | width | 14 HP | — | 266 |
| module | depth | 25 mm | — | 266 |
| power | +12V current | 220 mA | — | 266 |
| power | -12V current | 40 mA | — | 266 |
| voices | simultaneous effects | 20 effects | — | 266 |
| stereo | max stereo voices | 2 voices | — | 266 |

## Behavior

- SP1-SP4 outputs: when unpatched → normalled to mix [265]
- Freeze effect: when potentiometer not at midpoint → freeze enabled [265]
- T-F CV input: when gate detected → freeze enabled [265]
- V/oct CV: when exceeds 2-octave range → octave wraps [265]
- Drive: when potentiometer 0-50% → clean gain increase [265]
- Drive: when potentiometer 50-100% → added analog-style saturation [265]
- Compressor: when % COMPRESS above 0% → compressor enabled [265]
- SIDECHAIN voice: when sidechain enabled → drives compression, uncompressed [265]
- Sidechain: when default → disabled [265]
- Momentary Mode: when button released → effect reverts [265]
- Momentary Mode: when encoder pressed before release → changes applied [265]
- Punch effects: when no buttons pressed → no effects applied [265]
- Punch effects: when voice amount zero → effect not triggered [265]
- CHORD MIDI MODE: when voices share octave range → voice-stealing chord play [265]
- kit: when no voice 1 sample → kit cannot open [265]
- SD card: when no kits → displays 'NO K' [265]
- LAYER default: when kit never stored → voices use default mode [265]
- MIDI: when channel mismatch → messages ignored [265]
- AUTOSAVE: when enabled, at power-up → last kit loaded [265]
- mute group: when trigger sample plays → muted sample stops [265]
- layers: when default → random playback [265]
- Pitch effect: when speed increased → higher pitch, shorter duration [265]

## Sources

- [265] Rample Manual (manual): https://squarp.net/rample/manual/
- [266] Squarp Rample product page (product_page): https://squarp.net/rample/

Full record as JSON: https://eurorackref.com/squarp-instruments/rample.json
