# LS1 lightStrip (Sound Machines)

Canonical page: https://eurorackref.com/soundmachines/ls1-lightstrip/

- id: `soundmachines/ls1-lightstrip`
- width: 4 HP; depth: unknown mm
- power: +12 V 100 mA, −12 V 7 mA, +5 V ? mA
- status: current
- functions: Manual Controller, CV Recorder / Gesture Looper

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| CV | cv | slider position CV | 0 to 10 V | unipolar | capacitive slider, movement recorder | 942 |
| GATE | gate | finger touch gate | ≤ 5 V | not stated | capacitive slider, movement recorder | 942 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| slider | other | capacitive finger slider | — | capacitive slider, CV, GATE | 942 |
| REC/MODE | button | mode select / record | — | movement recorder, capacitive slider | 942 |
| 5/10V CV out | jumper | CV output range | — | CV | 942 |
| Board | jumper | board orientation | — | CV | 942 |
| G_I/O | jumper | GATE direction | — | GATE | 942 |

## Modes

- LIVE (REC/MODE = tap) [942]
- HOLD (REC/MODE = tap) [942]
- REC (REC/MODE = hold while touching) [942]
- External GATE (G_I/O = short) [942]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| movement recorder | max record time | 8 s | — | 942 |
| movement recorder | resolution | 15 ms | — | 942 |
| CV | output range | 0 to 5 V | 5V jumper | 942 |
| CV | output range | 0 to 10 V | 10V jumper | 942 |
| module | width | 4 HP | — | 942 |
| power | +12V current | 100 mA | — | 942 |
| power | -12V current | 5 to 7 mA | — | 942 |

## Behavior

- CV: when finger touches slider → voltage follows finger (LIVE) [942]
- CV: when finger withdrawn → value held (HOLD) [942]
- GATE: when in HOLD mode → always on (HOLD) [942]
- recording: when REC/MODE released → loop playback starts (REC) [942]
- recording: when exceeds 8 seconds → loop playback starts (REC) [942]
- playback: when slider touched → overrides output, timing kept (REC) [942]
- playback: when REC/MODE tapped → PLAY phase ends (REC) [942]
- recording: when GATE input high → records finger position (External GATE) [942]
- recording: when GATE input goes low → loops recorded values (External GATE) [942]
- recording: when gate exceeds max time → loop starts automatically (External GATE) [942]
- LIVE/HOLD: when External GATE mode → ignore GATE signal (External GATE) [942]
- GATE input: when above 5V → may malfunction (External GATE) [942]
- jumpers: when at delivery → 5V range, GATE output [942]

## Sources

- [942] Sound Machines LS1 lightStrip Manual (manual): https://www.sound-machines.it/cms/wp-content/uploads/2013/11/LS1lightstrip_Manual_Sep2013.pdf
- [943] Sound Machines LS1 lightStrip product page (product_page): https://www.sound-machines.it/product/ls1lightstrip/

Full record as JSON: https://eurorackref.com/soundmachines/ls1-lightstrip.json
