# Battering Ram (Shakmat Modular)

Canonical page: https://eurorackref.com/shakmat/battering-ram/

- id: `shakmat/battering-ram`
- width: 8 HP; depth: 21 mm
- power: +12 V 85 mA, −12 V 10 mA, +5 V ? mA
- status: current
- functions: Drum Voice, Distortion / Saturation, Wavefolder, ADSR Envelope, 1V/Oct Pitch Tracking

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Trigger CV input | trigger, gate | kick trigger | -5 to 5 V | not stated | — | 659 |
| Drive CV input | cv | drive amount CV | -5 to 5 V | not stated | — | 659 |
| Decay CV input | cv | decay length CV | -5 to 5 V | not stated | — | 659 |
| Velocity CV input | cv | hit level | 0 to 5 V | unipolar | — | 659 |
| Click CV input | cv | click amount CV | -5 to 5 V | not stated | — | 659 |
| Pitch CV input | pitch, cv | pitch V/oct | 0 to 5 V | not stated | — | 659 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Envelope output | cv | amplitude envelope | not stated | not stated | Amplitude envelope | 659 |
| Output | audio | kick output | -5 to 5 V | not stated | Level, Drive section, HiPass Filter | 659 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Drive potentiometer | knob | distortion amount | — | Drive section | 659 |
| Level button | button | level setting | — | Level | 659 |
| Trigger button | button | manual trigger | — | Bass drum | 659 |
| Drive Type button | button | drive type select | — | Drive section | 659 |
| Decay potentiometer | knob | decay length | — | Amplitude envelope | 659 |
| Depth | knob | pitch envelope decay | — | Pitch envelope | 659 |
| Store/Recall button | button | panel snapshot | — | Bass drum | 659 |
| Click potentiometer | knob | pitch envelope amount | — | Pitch envelope | 659 |
| Pitch potentiometer | knob | kick pitch | 2 to 5 octaves | Bass drum | 659 |
| Gate button | button | gate mode | — | Amplitude envelope | 659 |
| HiPass Filter button | button | engage high-pass | — | HiPass Filter | 659 |
| Pitch Lock button | button | lock tuning | — | Pitch potentiometer | 659 |
| Envelope inversion button | button | invert envelope output | — | Envelope output | 659 |

## Modes

- Trigger mode (Gate button = off) [659]
- Gate mode (Gate button = on) [659]
- Drive type 1 (Drive Type button = green) [659]
- Drive type 2 (Drive Type button = red) [659]
- Pitch lock (Pitch Lock button = on) [659]
- Advanced parameters [659]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Pitch potentiometer | range | 2 octaves | default, C1 to C3 | 659 |
| Pitch potentiometer | range | 5 octaves | advanced, C0 to C5 | 659 |
| HiPass Filter | cutoff | 30 Hz | — | 659 |
| HiPass Filter | order | 3 order | — | 659 |
| Pitch & Velocity inputs | voltage range | 0 to 5 V | — | 659 |
| Other CV inputs | voltage range | -5 to 5 V | — | 659 |
| Audio outputs | voltage range | -5 to 5 V | — | 659 |
| Level | indicator LEDs | 3 LEDs | — | 659 |
| Select Bus | presets | 16 presets | — | 659 |
| Module | width | 8 HP | — | 659 |
| Module | depth | 21 mm | — | 659 |
| Module | current +12V | 85 mA | — | 659 |
| Module | current -12V | 10 mA | — | 659 |
| Module | price | 259 EUR | assembled | 660 |
| Module | price | 210 EUR | DIY kit | 660 |

## Behavior

- Trigger input: when default (Gate button off) → responds to rising edges (Trigger mode) [659]
- Trigger input: when Gate button on → hold stage added (Gate mode) [659]
- Output level: when Velocity unpatched → constant loudness [659]
- Output level: when Velocity patched → follows CV at trigger [659]
- Minimum level: when set to 0, 0V velocity → level is null [659]
- Drive potentiometer: when Level button released → catch previous position to reactivate [659]
- Drive button: when Drive pot not caught → blinks [659]
- Pitch Lock: when quick press → pitch locked, pot octave switch [659]
- Pitch Lock: when disabled → catch pot to reactivate [659]
- Store/Recall: when recalling → lit until all recalled [659]
- Store/Recall: when parameter unlocked → blinks once [659]
- Envelope output: when Inversion button on → envelope inverted [659]
- Inverted envelope: when advanced button off → positive polarity [659]
- Inverted envelope: when advanced button on → negative polarity [659]
- Depth: when minimum value → very clicky envelope [659]

## Sources

- [659] Shakmat Battering Ram User Manual (manual): https://shakmat.com/doc/ram/RAM-User_Manual.pdf
- [660] Shakmat Battering Ram product page (product_page): https://shakmat.com/products/battering-ram/

Full record as JSON: https://eurorackref.com/shakmat/battering-ram.json
