# Nautilus (Qu-Bit Electronix)

Canonical page: https://eurorackref.com/qu-bit-electronix/nautilus/

- id: `qu-bit-electronix/nautilus`
- width: 14 HP; depth: 22 mm
- power: +12 V 151 mA, −12 V 6 mA, +5 V 0 mA
- status: current
- functions: Delay, Reverse playback, Freeze / Hold, Pitch Shifter / Frequency Shifter, Tempo / Clock Sync, Reverb, Lowpass Filter, Highpass Filter, Distortion / Saturation, Wavefolder, Stereo Inputs / Outputs

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Mix CV | cv | dry/wet mix CV | -5 to 5 V | bipolar | — | 669 |
| Resolution CV | cv | clock div/mult CV | -5 to 5 V | bipolar | — | 669 |
| Feedback CV | cv | feedback amount CV | -5 to 5 V | bipolar | — | 669 |
| Sensors CV | cv | active delay lines CV | -5 to 5 V | bipolar | — | 669 |
| Dispersal CV | cv | delay spacing CV | -5 to 5 V | bipolar | — | 669 |
| Reversal CV | cv | reversed lines CV | -5 to 5 V | bipolar | — | 669 |
| Chroma CV | cv | effect select CV | -5 to 5 V | bipolar | — | 669 |
| Depth CV | cv | effect amount CV | -5 to 5 V | bipolar | — | 669 |
| Clock In | clock | external clock input | not stated | not stated | — | 669 |
| Freeze Gate Input | gate | freeze delay buffer | not stated | not stated | — | 669 |
| Purge Gate Input | gate | clear delay lines | not stated | not stated | — | 669 |
| Audio Input Left | audio | left audio input | -5 to 5 V | bipolar | — | 669 |
| Audio Input Right | audio | right audio input | -5 to 5 V | bipolar | Audio Input Left | 669 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Audio Output Left | audio | left audio output | -5 to 5 V | not stated | Mix, reverb | 669 |
| Audio Output Right | audio | right audio output | -5 to 5 V | not stated | Mix, reverb | 669 |
| Sonar Output | cv, gate, clock | algorithmic CV/gate output | 0 to 5 V | unipolar | Sonar, delay network | 669 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Mix | knob | dry/wet blend | — | Mix | 669 |
| Tap Tempo Button | button | tap internal clock | — | internal clock | 669 |
| Resolution | knob | clock div/mult | — | delay network | 669 |
| Feedback | knob | delay feedback amount | — | delay network | 669 |
| Sensors | knob | active delay lines | 2 to 8 delay lines | delay network | 669 |
| Dispersal | knob | delay line spacing | — | delay network | 669 |
| Dispersal Attenuverter | knob | Dispersal CV attenuverter | — | Dispersal CV | 669 |
| Attenuverter 2 | knob | assignable CV attenuverter | — | Feedback CV | 669 |
| Reversal | knob | reversed delay lines | — | delay network | 669 |
| Chroma | knob | feedback effect select | — | Chroma | 669 |
| Depth | knob | Chroma effect amount | — | Chroma | 669 |
| Freeze Button | button | lock delay buffer | — | delay network | 669 |
| Delay Mode Button | button | delay type select | — | delay network | 669 |
| Feedback Mode Button | button | feedback path select | — | delay network | 669 |
| Purge Button | button | clear delay lines | — | delay network | 669 |

## Modes

- Fade (Delay Mode Button = Fade) [669]
- Doppler (Delay Mode Button = Doppler) [669]
- Shimmer (Delay Mode Button = Shimmer) [669]
- De-Shimmer (Delay Mode Button = De-Shimmer) [669]
- Normal (Feedback Mode Button = Normal) [669]
- Ping Pong (Feedback Mode Button = Ping Pong) [669]
- Cascade (Feedback Mode Button = Cascade) [669]
- Adrift (Feedback Mode Button = Adrift) [669]
- Freerunning Delay [669]
- Summed Mono [669]
- Stepped Voltage [669]
- Master Clock [669]
- Variable Clock [669]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| clock | clock rate range | 0.25 to 1000 Hz | — | 669 |
| internal clock | default tempo at boot | 120 BPM | — | 669 |
| delay network | delay lines | 8 lines | — | 669 |
| delay line | max audio per line | ≤ 20 s | — | 670 |
| delay network | max delay time | ≤ 80 s | Cascade mode | 669 |
| Freeze | max frozen buffer length | ≤ 10 s | — | 669 |
| Shimmer | transpose up | 1 to 12 semitones | default 12 | 669 |
| De-Shimmer | transpose down | 1 to 12 semitones | default 12 | 669 |
| Sonar Output | gate duty cycle | 50 % | gate output | 669 |
| Sonar Output | gate amplitude | 5 V | gate output | 669 |
| audio | noise floor | -102 dB | — | 669 |
| audio | sample rate | 48 kHz | — | 669 |
| audio | conversion bit depth | 24 bit | — | 669 |
| knobs and CV inputs | resolution | 16 bit | — | 669 |
| module | width | 14 HP | — | 669 |
| module | depth | 22 mm | — | 669 |
| power | +12V current | 151 mA | — | 669 |
| power | -12V current | 6 mA | — | 669 |
| power | -12V current | 15 mA | — | 670 |
| USB port | external power draw | ≤ 500 mA | — | 669 |
| Tap Tempo Button | minimum taps | 2 taps | — | 669 |

## Behavior

- Mix: when fully counter-clockwise → dry signal only [669]
- Mix: when fully clockwise → wet signal only [669]
- Sensors: when fully counter-clockwise → 1 line per channel [669]
- Sensors: when fully clockwise → 4 lines per channel [669]
- Dispersal: when only 1 Sensor active → fine tunes L/R offset [669]
- Dispersal Attenuverter: when at 12 o'clock → CV fully attenuated [669]
- Dispersal Attenuverter: when fully counter-clockwise → CV fully inverted [669]
- Reversal: when one Sensor selected → none, left, then both [669]
- Reversal: when knob lowered below position → line returns forward [669]
- Reversal: when Shimmer or De-Shimmer mode → repeats once before shifting [669]
- Depth: when fully counter-clockwise → Chroma effect off [669]
- Depth: when Refraction Interference selected → fixed random lo-fi amounts [669]
- Freeze: when engaged → wet acts as beat repeat [669]
- Freeze: when Quantize Freeze on → activates on next clock [669]
- Freeze: when Freeze Mix Always Wet → forces Mix full wet [669]
- Purge: when button pressed / gate high → clears all delay lines [669]
- Purge: when Continuous Purge enabled → active while held/high [669]
- Normal feedback: when left-only input → delay only left output (Normal) [669]
- Sensors: when Cascade or Adrift mode → adds line outputs to wet [669]
- Audio Input Left: when Audio Input Right unpatched → feeds both channels [669]
- internal clock: when at boot → 120 BPM [669]
- Delay/Feedback Mode: when Clear On Mode Change enabled → buffers cleared on change [669]
- Resolution: when new position selected → Kelp LEDs flash white [669]

## Sources

- [669] Qu-Bit Nautilus Manual v1.2.1 (firmware v1.2.0) (manual): https://www.qubitelectronix.com/s/Nautilus_v1-2-1.pdf
- [670] Qu-Bit Nautilus product page (product_page): https://www.qubitelectronix.com/shop/p/nautilus

Full record as JSON: https://eurorackref.com/qu-bit-electronix/nautilus.json
