# Mimetic Digitwolis (Noise Engineering)

Canonical page: https://eurorackref.com/noise-engineering/mimetic-digitwolis/

- id: `noise-engineering/mimetic-digitwolis`
- width: 10 HP; depth: 25 mm
- power: +12 V 80 mA, −12 V 20 mA, +5 V ? mA
- status: current
- functions: Step Sequencer, Trigger / Euclidean Sequencer, Quantizer, MIDI-to-CV Interface, Master Clock, Tempo / Clock Sync, Clock Divider / Multiplier, Slew Limiter, CV Recorder / Gesture Looper

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| MIDI In | midi | MIDI input | not stated | unknown | — | 709 |
| CV In A | cv, trigger | configurable CV input | 0 to 5 V | not stated | — | 709 |
| CV In B | cv, trigger | configurable CV input | 0 to 5 V | not stated | — | 709 |
| CV In C | cv, trigger | configurable CV input | 0 to 5 V | not stated | — | 709 |
| CV In D | cv, trigger | configurable CV input | 0 to 5 V | not stated | — | 709 |
| Trig In R | trigger, gate, clock | configurable trigger input | not stated | unknown | — | 709 |
| Trig In 1 | trigger, gate, clock | configurable trigger input | not stated | unknown | — | 709 |
| Trig In 2 | trigger, gate, clock | configurable trigger input | not stated | unknown | — | 709 |
| Trig In 3 | trigger, gate, clock | configurable trigger input | not stated | unknown | — | 709 |
| Trig In 4 | trigger, gate, clock | configurable trigger input | not stated | unknown | — | 709 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| MIDI Out | midi | MIDI output | not stated | unknown | MIDI, Lane 1, Lane 2, Lane 3, Lane 4 | 709 |
| CV Out 1 | cv, pitch, gate, trigger | lane 1 output | 0 to 5 V | unipolar | Lane 1 | 709 |
| CV Out 2 | cv, pitch, gate, trigger | lane 2 output | 0 to 5 V | unipolar | Lane 2 | 709 |
| CV Out 3 | cv, pitch, gate, trigger | lane 3 output | 0 to 5 V | unipolar | Lane 3 | 709 |
| CV Out 4 | cv, pitch, gate, trigger | lane 4 output | 0 to 5 V | unipolar | Lane 4 | 709 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Edit | knob | encoder: steps and menus | — | Lane 1, Lane 2, Lane 3, Lane 4 | 709 |
| View | button | swap Overview/Focus screens | — | screen | 709 |
| Select 1 | button | lane 1 select | — | Lane 1 | 709 |
| Select 2 | button | lane 2 select | — | Lane 2 | 709 |
| Select 3 | button | lane 3 select | — | Lane 3 | 709 |
| Select 4 | button | lane 4 select | — | Lane 4 | 709 |
| Stop/Edit/Run | switch | transport control | — | transport, Lane 1, Lane 2, Lane 3, Lane 4 | 709 |
| Config | button | open/close configuration menu | — | screen | 709 |
| Copy | button | copy lane sequence | — | Lane 1, Lane 2, Lane 3, Lane 4 | 709 |
| Save | button | open save menu | — | memory | 709 |
| Load | button | open load menu | — | memory | 709 |
| Prev | button | previous step | — | Lane 1, Lane 2, Lane 3, Lane 4 | 709 |
| Next | button | next step | — | Lane 1, Lane 2, Lane 3, Lane 4 | 709 |
| Zero | button | step to minimum | — | Lane 1, Lane 2, Lane 3, Lane 4 | 709 |
| Shred | button | step to random value | — | Lane 1, Lane 2, Lane 3, Lane 4 | 709 |
| Transport | menu_setting | global transport source | — | transport | 709 |
| BPM | menu_setting | internal clock rate | — | transport | 709 |
| Clck | menu_setting | MIDI clock output | — | MIDI | 709 |
| Presets | menu_setting | factory presets | — | Lane 1, Lane 2, Lane 3, Lane 4 | 709 |
| Tune | menu_setting | all outputs to 1V | — | CV Out 1, CV Out 2, CV Out 3, CV Out 4 | 709 |
| Thru | menu_setting | MIDI thru on/off | — | MIDI In, MIDI Out | 709 |
| Type | menu_setting | lane output type | — | Lane 1, Lane 2, Lane 3, Lane 4 | 709 |
| Dims | menu_setting | step layout/navigation | — | Lane 1, Lane 2, Lane 3, Lane 4 | 709 |
| Len | menu_setting | sequence length | 1 to 16 steps | Lane 1, Lane 2, Lane 3, Lane 4 | 709 |
| Div | menu_setting | advance clock divider | 1 to 16 | Lane 1, Lane 2, Lane 3, Lane 4 | 709 |
| Amt | menu_setting | shift step count | — | Lane 1, Lane 2, Lane 3, Lane 4 | 709 |
| Slew | menu_setting | output slew amount | — | Lane 1, Lane 2, Lane 3, Lane 4 | 709 |
| VMin | menu_setting | lane minimum voltage | — | Lane 1, Lane 2, Lane 3, Lane 4 | 709 |
| VMax | menu_setting | lane maximum voltage | — | Lane 1, Lane 2, Lane 3, Lane 4 | 709 |
| Scale | menu_setting | scale selection | — | Lane 1, Lane 2, Lane 3, Lane 4 | 709 |
| Dist | menu_setting | nudge direction bias | — | Lane 1, Lane 2, Lane 3, Lane 4 | 709 |
| Chan | menu_setting | MIDI channel | — | MIDI, Lane 1, Lane 2, Lane 3, Lane 4 | 709 |
| Mode | menu_setting | MIDI note mode | — | Lane 1, Lane 2, Lane 3, Lane 4 | 709 |

## Modes

- CV (Type = CV) [709]
- Note (Type = Note) [709]
- Gate (Type = Gate) [709]
- Trig (Type = Trig) [709]
- Qtiz (Type = Qtiz) [709]
- None (Transport = None) [709]
- MIDI (Transport = MIDI) [709]
- DIN (Transport = DIN) [709]
- Gate transport (Transport = Gate) [709]
- Trig transport (Transport = Trig) [709]
- Clock (Transport = Clock) [709]
- Stop (Stop/Edit/Run = Stop) [709]
- Edit (Stop/Edit/Run = Edit) [709]
- Run (Stop/Edit/Run = Run) [709]
- Overview [709]
- Focus [709]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Lane | sequence length | 1 to 16 steps | — | 709 |
| Div | clock division | 1 to 16 ratio | — | 709 |
| memory | save slots | 24 slots | 4 banks of 6 | 709 |
| Trig lane | trigger length | 5 ms | — | 709 |
| Equal scale | octave divisions | 1 to 24 steps | — | 709 |
| MIDI | step CCs default | 4 to 19 CC number | — | 709 |
| MIDI | program change range | 0 to 23 PC number | — | 709 |
| DIN transport | clock rate | 24 PPQN | — | 709 |
| Tune | output level | 1 V | — | 709 |
| Dist | nudge bias center | 8 value | — | 709 |
| module | input-to-output latency | 1 ms | — | 709 |
| module | width | 10 HP | — | 709 |
| module | depth | 1 inches | — | 709 |
| power | +12V current | 80 mA | — | 709 |
| power | -12V current | 20 mA | — | 709 |

## Behavior

- lane: when reset trigger received → step 1 on next advance [709]
- lane: when advance and reset simultaneous → goes to step 1 [709]
- lane clock divider: when reset received → divider count resets [709]
- Stop: when switch at Stop → lanes ignore CV, triggers [709]
- Stop: when Stop mode → quantizer lanes disabled [709]
- Stop/Edit/Run: when flipped Stop to Run → all lanes reset step 1 [709]
- transport: when MIDI/DIN/Gate/Trig source stopped → lanes stop; quantizers hold [709]
- transport: when external transport starts → all lanes reset [709]
- MIDI transport: when MIDI Start received → lanes reset to step 1 [709]
- Gate transport: when gate input low → clock not followed [709]
- Trig transport: when trigger received → toggles run/stop [709]
- transport: when source changed or loaded → lanes may lose sync [709]
- Zero: when step already at minimum → sets step to maximum [709]
- Prev + Next: when tapped together → jump to step 1 [709]
- Prev/Next: when Overview, lane deselected → lane position unchanged [709]
- Edit: when no lane selected → steps not edited [709]
- pitch lane: when new scale applied → sequence reflects immediately [709]
- MIDI output: when lane Chan Off → lane MIDI disabled [709]
- Note lane: when MIDI Mode edit, note in → note assigned to step [709]
- Tune: when selected → all outputs 1V [709]
- Tune: when menu closed → outputs return to values [709]
- Dist: when above 8 → nudges biased upward/on [709]
- Dist: when below 8 → nudges biased downward/off [709]
- Qtiz lane: when trigger at Trig mapping → reads, quantizes, outputs CV [709]
- save slot: when loaded manually → outputs matching Program Change [709]
- Program Change: when received on Chan → loads save slot [709]
- Shift: when trigger received → steps moved forward Amt [709]
- Inp: when trigger received → CV read into step [709]
- module: when reboot → restores autosaved state [709]

## Sources

- [709] Noise Engineering Mimetic Digitwolis Manual (manual): https://manuals.noiseengineering.us/md2/
- [710] Noise Engineering Mimetic Digitwolis product page (product_page): https://noiseengineering.us/products/mimetic-digitwolis

Full record as JSON: https://eurorackref.com/noise-engineering/mimetic-digitwolis.json
