# Shades 2020 (Mutable Instruments)

Canonical page: https://eurorackref.com/mutable-instruments/shades-2020/

- id: `mutable-instruments/shades-2020`
- width: 6 HP; depth: 25 mm
- power: +12 V 15 mA, −12 V 15 mA, +5 V ? mA
- status: discontinued
- functions: Attenuverter / Offset, Mixer, Voltage Math / Precision Adder

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Signal input 1 | audio, cv | signal input | not stated | not stated | +5V | 603 |
| Signal input 2 | audio, cv | signal input | not stated | not stated | +5V | 603 |
| Signal input 3 | audio, cv | signal input | not stated | not stated | +5V | 603 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Signal output 1 | audio, cv | channel output | not stated | not stated | Channel 1 | 603 |
| Signal output 2 | audio, cv | channel output | not stated | not stated | Channel 2, Mix chain | 603 |
| Signal output 3 | audio, cv | channel output | not stated | not stated | Channel 3, Mix chain | 603 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Function selector 1 | switch | attenuator or attenuverter | — | Channel 1 | 603 |
| Attenuator/attenuverter 1 | knob | channel gain | -1 to 1 gain | Channel 1 | 603 |
| Jumper 1 | jumper | unpatched input voltage | — | Signal input 1 | 603 |
| Function selector 2 | switch | attenuator or attenuverter | — | Channel 2 | 603 |
| Attenuator/attenuverter 2 | knob | channel gain | -1 to 1 gain | Channel 2 | 603 |
| Jumper 2 | jumper | unpatched input voltage | — | Signal input 2 | 603 |
| Function selector 3 | switch | attenuator or attenuverter | — | Channel 3 | 603 |
| Attenuator/attenuverter 3 | knob | channel gain | -1 to 1 gain | Channel 3 | 603 |
| Jumper 3 | jumper | unpatched input voltage | — | Signal input 3 | 603 |

## Modes

- attenuator (Function selector = lower) [603]
- attenuverter (Function selector = upper) [603]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| inputs | impedance | 100000 ohm | — | 604 |
| attenuator mode | gain range | 0 to 1 gain | attenuator | 603 |
| attenuverter mode | gain range | -1 to 1 gain | attenuverter | 603 |
| unpatched input | normal voltage | 5 V | jumper +5V | 603 |
| unpatched input | normal voltage | 10 V | jumper +10V | 603 |
| unpatched input | normal voltage | 0 V | jumper removed | 603 |
| module | width | 6 HP | — | 604 |
| module | depth | 25 mm | — | 604 |
| module | +12V current | 15 mA | — | 603 |
| module | -12V current | 15 mA | — | 603 |

## Behavior

- Signal input: when unpatched → jumper voltage sent [603]
- Jumper: when removed → input normal is 0V [603]
- Signal output: when unpatched → routed to next channel [603]
- Signal output 2: when output 1 unpatched → sum of channels 1-2 [603]
- Signal output 3: when outputs 1, 2 unpatched → sum of all channels [603]
- knob: when fully counter-clockwise → signal muted (attenuator) [603]
- knob: when fully clockwise → unattenuated (attenuator) [603]
- knob: when fully counter-clockwise → signal inverted (attenuverter) [603]
- knob: when 12 o'clock → signal muted (attenuverter) [603]
- knob: when fully clockwise → unattenuated (attenuverter) [603]

## Sources

- [603] Shades 2020 Manual (full) (manual): https://pichenettes.github.io/mutable-instruments-documentation/modules/shades_2020/manual/
- [604] Mutable Instruments Shades 2020 product page (product_page): https://pichenettes.github.io/mutable-instruments-documentation/modules/shades_2020/

Full record as JSON: https://eurorackref.com/mutable-instruments/shades-2020.json
