# Peaks (Mutable Instruments)

Canonical page: https://eurorackref.com/mutable-instruments/peaks/

- id: `mutable-instruments/peaks`
- width: 8 HP; depth: 25 mm
- power: +12 V 60 mA, −12 V 2 mA, +5 V ? mA
- status: current
- functions: ADSR Envelope, LFO, Tempo / Clock Sync, Drum Voice, Step Sequencer, Gate / Trigger Utility, Probability / Bernoulli Gate

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| TRIG 1 | gate, trigger, clock | channel 1 gate/trigger input | not stated | unknown | — | 403 |
| TRIG 2 | gate, trigger, clock | channel 2 gate/trigger input | not stated | unknown | — | 403 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| OUT 1 | audio, cv, gate | channel 1 audio/CV output | unknown | unknown | Channel 1 | 403 |
| OUT 2 | audio, cv, gate | channel 2 audio/CV output | unknown | unknown | Channel 2 | 403 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| SPLIT | button | twin/split/expert select | — | Channel 1, Channel 2 | 403 |
| FUNCTION | button | cycles 4 main functions | — | Channel 1, Channel 2 | 403 |
| Knob 1 | knob | function parameter | — | Channel 1, Channel 2 | 403 |
| Knob 2 | knob | function parameter | — | Channel 1, Channel 2 | 403 |
| Knob 3 | knob | function parameter | — | Channel 1, Channel 2 | 403 |
| Knob 4 | knob | function parameter | — | Channel 1, Channel 2 | 403 |
| TRIG 1 button | button | manual trigger ch1 | — | Channel 1, TRIG 1 | 403 |
| TRIG 2 button | button | manual trigger ch2 | — | Channel 2, TRIG 2 | 403 |

## Modes

- twin (SPLIT = LED off) [403]
- split (SPLIT = LED on) [403]
- expert (SPLIT = hold 1s) [403]
- ENV (FUNCTION = press) [403]
- LFO (FUNCTION = press) [403]
- TAP (FUNCTION = press) [403]
- DRUM (FUNCTION = press) [403]
- Mini step-sequencer (FUNCTION = hold 1s) [403]
- Trigger delay/shaper (FUNCTION = hold 1s) [403]
- Trigger stream randomizer (FUNCTION = hold 1s) [403]
- Digital drum synth (FUNCTION = hold 1s) [403]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 8 HP | — | 404 |
| module | depth | 25 mm | — | 404 |
| module | +12V current | 60 mA | — | 403 |
| module | -12V current | 2 mA | — | 403 |
| Envelope generator | segment duration | 0.2 to 8000 ms | — | 404 |
| LFO | frequency | 0.03 to 160 Hz | — | 404 |
| OUT | output level | 0 to 8 V | envelopes | 404 |
| OUT | output level | 10 Vpp | LFOs and drum signals | 404 |
| inputs | trigger threshold | 0.6 V | product page | 404 |
| TRIG | trigger threshold | 0.7 V | manual | 403 |
| inputs | impedance | 100000 ohm | — | 404 |
| generation | resolution | 16 bit | — | 404 |
| generation | sample rate | 48 kHz | — | 404 |
| Mini step-sequencer | steps | 4 steps | twin mode | 403 |
| Mini step-sequencer | steps | 2 steps | split mode | 403 |
| processor | clock | 72 MHz | — | 404 |

## Behavior

- ENV: when gate high → starts and holds envelope (ENV) [403]
- LFO: when trigger received → resets waveform cycle (LFO) [403]
- TAP: when triggers received → set LFO period (TAP) [403]
- twin mode: when any → knobs control both channels (twin) [403]
- split mode: when any → knobs 1-2 ch1, 3-4 ch2 (split) [403]
- split mode: when unexposed parameters → set to neutral defaults (split) [403]
- expert mode: when SPLIT pressed → toggles edited channel (expert) [403]
- Mini step-sequencer ch1: when twin/expert → clock TRIG 1, reset TRIG 2 (Mini step-sequencer) [403]
- Mini step-sequencer: when split → no reset; per-channel clock (Mini step-sequencer) [403]
- Digital drum synth color: when at 12 o'clock → no modification (Digital drum synth) [403]
- Digital drum synth color: when turned right → adds noise (snares) (Digital drum synth) [403]
- Digital drum synth color: when turned left → adds distortion (909 kicks) (Digital drum synth) [403]
- Digital drum synth: when FM envelope decay → shorter than AM, tied (Digital drum synth) [403]
- SD/HH generator: when specific settings combination → becomes 808 hi-hat (DRUM) [404]
- firmware update: when signal level inadequate → LEDs blink alternately [403]

## Sources

- [403] Peaks Manual (full) (manual): https://pichenettes.github.io/mutable-instruments-documentation/modules/peaks/manual/
- [404] Mutable Instruments Peaks product page (product_page): https://pichenettes.github.io/mutable-instruments-documentation/modules/peaks/

Full record as JSON: https://eurorackref.com/mutable-instruments/peaks.json
