# Marbles (Mutable Instruments)

Canonical page: https://eurorackref.com/mutable-instruments/marbles/

- id: `mutable-instruments/marbles`
- width: 18 HP; depth: 25 mm
- power: +12 V 80 mA, −12 V 20 mA, +5 V ? mA
- status: current
- functions: Random / Sample & Hold CV, Master Clock, Probability / Bernoulli Gate, Trigger / Euclidean Sequencer, Clock Divider / Multiplier, Quantizer, Slew Limiter, CV Recorder / Gesture Looper

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| BIAS (t) | cv | t bias CV | -5 to 5 V | bipolar | — | 547 |
| RATE | cv, pitch | clock rate CV (V/O) | -5 to 5 V | bipolar | — | 547 |
| JITTER | cv, trigger | jitter CV | -5 to 5 V | bipolar | — | 547 |
| CLOCK (t) | clock | t external clock input | -5 to 5 V | bipolar | — | 547 |
| DEJA VU | cv | DEJA VU CV input | -5 to 5 V | bipolar | — | 547 |
| STEPS | cv, trigger | steps CV | -5 to 5 V | bipolar | — | 547 |
| SPREAD | cv, pitch | spread CV | -5 to 5 V | bipolar | — | 547 |
| BIAS (X) | cv | X bias CV | -5 to 5 V | bipolar | — | 547 |
| CLOCK (X) | clock, gate | X external clock input | -5 to 5 V | bipolar | t1/t2/t3 | 550 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| t1 | gate | random gate output | 0 to 8 V | unknown | t generator | 547 |
| t2 | gate, clock | jittery master clock | 0 to 8 V | unknown | t generator | 547 |
| t3 | gate | random gate output | 0 to 8 V | unknown | t generator | 547 |
| X1 | cv, pitch | random CV output | -5 to 5 V | unknown | X generator | 547 |
| X2 | cv, pitch | random CV output | -5 to 5 V | unknown | X generator | 547 |
| X3 | cv, pitch | random CV output | -5 to 5 V | unknown | X generator | 547 |
| Y | cv | smooth random output | -5 to 5 V | bipolar | Y generator | 547 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| RATE | knob | clock rate | — | t generator | 547 |
| Clock range | button | clock range x4/÷4 | — | t generator | 547 |
| JITTER | knob | clock timing randomness | — | t generator | 547 |
| BIAS (t) | knob | t1 / t3 likelihood | — | t1, t3 | 547 |
| t mode button | button | t generator model | — | t generator | 547 |
| t DEJA VU button | button | DEJA VU on t | — | t generator, DEJA VU section | 547 |
| X DEJA VU button | button | DEJA VU on X | — | X generator, DEJA VU section | 547 |
| DEJA VU | knob | re-cycling probability | — | DEJA VU section | 547 |
| LENGTH | knob | loop length | 1 to 16 steps | DEJA VU section | 547 |
| Output voltage range | button | X range select | — | X1, X2, X3 | 547 |
| SPREAD | knob | distribution width/shape | — | X generator | 547 |
| BIAS (X) | knob | distribution bias | — | X generator | 547 |
| STEPS | knob | steppiness / quantization | — | X generator, STEPS quantizer | 547 |
| X mode button | button | channel diversity | — | X1, X2, X3 | 547 |
| External processing | button | external processing mode | — | X generator | 547 |

## Modes

- coin toss (t mode button = green) [547]
- random ratio (t mode button = orange) [547]
- kick/snare alternation (t mode button = red) [547]
- Independent Bernoulli (t mode button = long press) [551]
- Deterministic divider/multiplier (t mode button = long press) [551]
- Three states (t mode button = long press) [551]
- External processing mode (External processing = press) [547]
- shift-register [547]
- scale recording (External processing = hold 2s) [547]
- scale selection (Output voltage range = hold 2s) [547]
- super lock [549]
- explicit reset [549]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 18 HP | — | 548 |
| module | depth | 25 mm | — | 548 |
| module | +12V current | 80 mA | — | 547 |
| module | -12V current | 20 mA | — | 547 |
| RATE | clock rate at 12 o'clock | 120 BPM | — | 547 |
| Clock range | rate factor | 0.25 to 4 x | — | 547 |
| gate length | duty cycle | 1 to 99 % | t1 and t3 | 547 |
| t2 | duty cycle | 50 % | — | 547 |
| LENGTH | loop length | 1 to 16 steps | — | 548 |
| X outputs | range | 0 to 2 V | range 1 | 547 |
| X outputs | range | 0 to 5 V | range 2 | 547 |
| X outputs | range | -5 to 5 V | range 3 | 547 |
| Y generator | range | -5 to 5 V | default | 547 |
| Y generator | clock relative to X2 | 0.0625 ratio | default 1/16 | 547 |
| t section | max input clock rate | ≤ 1 kHz | — | 548 |
| X section | max input clock rate | ≤ 8 kHz | — | 548 |
| inputs | bandwidth | 0 to 3200 Hz | — | 548 |
| module | refresh rate | 32 kHz | — | 548 |
| DAC | resolution | 14 bit | — | 548 |
| DAC | error | ≤ 1 mV | — | 548 |
| CV capture | resolution | 12 bit | — | 548 |
| gate outputs | level | 0 to 8 V | — | 548 |
| external processing | CV/gate timing tolerance | ≤ 3 ms | — | 547 |
| STEPS quantizer | scale slots | 6 scales | — | 548 |
| scale programming | recommended jam length | ≥ 50 notes | — | 547 |
| implicit reset | clock pause | 3 s | or 4 clock intervals, longest | 549 |
| explicit reset | reset lead before clock | 1 ms | ideal | 549 |

## Behavior

- CLOCK (t): when patched → replaces internal clock [547]
- RATE: when external t clock → becomes division/multiplication [547]
- JITTER: when external t clock → applied to external clock [547]
- CLOCK (X): when patched → X1-X3 follow external clock [547]
- X outputs: when CLOCK (X) unpatched → clocked by t1, t2, t3 [547]
- DEJA VU: when 7 to 12 o'clock → recycle probability 0 to 1 [547]
- DEJA VU: when 12 to 5 o'clock → loop jump probability rises [547]
- DEJA VU: when at 12 o'clock → locked loop, buttons blink [547]
- DEJA VU: when past 12, length 1 → outputs frozen [547]
- SPREAD knob: when fully counter-clockwise → constant voltage [547]
- SPREAD knob: when 12 o'clock → bell curve [547]
- SPREAD knob: when 2 o'clock → uniform distribution [547]
- SPREAD knob: when fully clockwise → min/max only, random gates [547]
- STEPS knob: when 12 o'clock → S&H steps [547]
- STEPS knob: when turned CCW → smoother, then smooth curves [547]
- STEPS knob: when turned CW → quantized, notes progressively removed [547]
- external processing: when needs random value → samples SPREAD CV input (External processing mode) [547]
- BIAS (X): when external processing → acts as transposition (External processing mode) [547]
- STEPS: when external processing → all outputs follow STEPS (External processing mode) [547]
- X outputs: when ext processing, X unclocked → same melody, some sustained (External processing mode) [547]
- X2/X3: when green diversity, ext clock+CV → shift-register by one tick (External processing mode) [547]
- Output voltage range LED: when external processing → off (External processing mode) [547]
- scale programming: when scale played ascending → no gradual carving [547]
- STEPS quantizer: when STEPS clockwise from 12 → least frequent notes removed [547]
- t and X sections: when clock after long pause → counters and patterns reset [549]
- JITTER reset: when rising edge → reset on next clock tick (explicit reset) [549]
- STEPS reset: when rising edge → X loop reset next tick (explicit reset) [549]
- t reset: when X clock unpatched or from t → cascades to X (explicit reset) [549]
- reset: when coincides with clock pulse → behavior unspecified (explicit reset) [549]
- super lock: when button pressed → returns to normal (super lock) [549]
- external processing: when X clock cable unplugged → X1 data copied to loops (External processing mode) [549]
- Independent Bernoulli: when each pulse → t1, t3 independent tosses (Independent Bernoulli) [551]
- Three states: when each pulse → t1, t3 or none (Three states) [551]
- t alternate mode: when short press → reverts to normal mode [551]

## Sources

- [547] Marbles Manual (full) (manual): https://pichenettes.github.io/mutable-instruments-documentation/modules/marbles/manual/
- [548] Mutable Instruments Marbles product page (product_page): https://pichenettes.github.io/mutable-instruments-documentation/modules/marbles/
- [549] Marbles Firmware changelog (firmware_notes): https://pichenettes.github.io/mutable-instruments-documentation/modules/marbles/firmware/
- [550] Marbles Quickstart Guide (manual): https://pichenettes.github.io/mutable-instruments-documentation/modules/marbles/downloads/marbles_quickstart.pdf
- [551] Marbles Secrets (hidden features) (manual): https://pichenettes.github.io/mutable-instruments-documentation/modules/marbles/secrets/

Full record as JSON: https://eurorackref.com/mutable-instruments/marbles.json
