# Grids (Mutable Instruments)

Canonical page: https://eurorackref.com/mutable-instruments/grids/

- id: `mutable-instruments/grids`
- width: 16 HP; depth: 25 mm
- power: +12 V 25 mA, −12 V 1 mA, +5 V ? mA
- status: current
- functions: Trigger / Euclidean Sequencer, Euclidean rhythm, Master Clock, Tempo / Clock Sync

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| CLOCK | clock | external clock input | 0 to 5 V | unknown | — | 691 |
| RESET | trigger | pattern reset | 0 to 5 V | unknown | — | 691 |
| MAP X | cv | map X CV | 0 to 5 V | not stated | — | 691 |
| MAP Y | cv | map Y CV | 0 to 5 V | not stated | — | 691 |
| CHAOS | cv | chaos amount CV | 0 to 5 V | not stated | — | 691 |
| FILL 1 | cv | channel 1 density CV | 0 to 5 V | not stated | — | 692 |
| FILL 2 | cv | channel 2 density CV | 0 to 5 V | not stated | — | 692 |
| FILL 3 | cv | channel 3 density CV | 0 to 5 V | not stated | — | 692 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| TRIG 1 | trigger, gate | channel 1 trigger | ≤ 5 V | unknown | pattern generator | 691 |
| TRIG 2 | trigger, gate | channel 2 trigger | ≤ 5 V | unknown | pattern generator | 691 |
| TRIG 3 | trigger, gate | channel 3 trigger | ≤ 5 V | unknown | pattern generator | 691 |
| ACC 1 | trigger, gate, clock | channel 1 accent | ≤ 5 V | unknown | pattern generator | 691 |
| ACC 2 | trigger, gate, clock | channel 2 accent | ≤ 5 V | unknown | pattern generator | 691 |
| ACC 3 | trigger, gate, clock | channel 3 accent | ≤ 5 V | unknown | pattern generator | 691 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| CLOCK (knob) | knob | internal clock rate | 40 to 240 BPM | internal clock | 691 |
| TAP | button | tap tempo / reset | — | internal clock, pattern generator | 691 |
| MAP X (knob) | knob | map X coordinate | — | pattern generator | 691 |
| MAP Y (knob) | knob | map Y coordinate | — | pattern generator | 691 |
| CHAOS (knob) | knob | random perturbation amount | — | pattern generator | 691 |
| FILL 1 (knob) | knob | channel 1 fill rate | — | pattern generator | 691 |
| FILL 2 (knob) | knob | channel 2 fill rate | — | pattern generator | 691 |
| FILL 3 (knob) | knob | channel 3 fill rate | — | pattern generator | 691 |

## Modes

- options [691]
- euclidean (MAP X (knob) = LEDs off) [691]
- gate output (MAP Y (knob) = LEDs on) [691]
- alternate output layout (CHAOS (knob) = LEDs on) [691]
- swing (FILL 3 (knob) = LEDs on) [691]
- tap as reset (FILL 2 (knob) = LEDs off) [691]
- clock resolution (FILL 1 (knob) = 4/8/24 ppqn) [691]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| internal clock | rate | 40 to 240 BPM | — | 691 |
| CLOCK | resolution options | 4 to 24 ppqn | selected 4, 8 or 24 | 692 |
| outputs | trigger duration | 1 ms | — | 691 |
| outputs | level | 5 V | — | 692 |
| CV inputs | knob range equivalent | 0 to 5 V | — | 691 |
| CV acquisition | rate | 1 kHz | — | 692 |
| CV acquisition | resolution | 8 bit | — | 692 |
| clock | resolution / latency | 120 µs | — | 692 |
| clock | worst case jitter | ≤ 0.5 % | at 120 BPM | 692 |
| options entry | hold time | 0.5 s | — | 691 |
| internal clock | duty cycle | 50 % | — | 691 |
| module | width | 16 HP | — | 691 |
| module | depth | 25 mm | — | 692 |
| module | +12V current | 25 mA | — | 691 |
| module | -12V current | 1 mA | — | 691 |

## Behavior

- internal clock: when CLOCK knob fully counter-clockwise → disabled; expects external clock [691]
- CLOCK input: when knob not minimum or tap set → external clock ignored [691]
- CLOCK knob: when tempo set by tap → locked, no effect [691]
- TAP: when tapped once → unlocks CLOCK knob [691]
- RESET: when rising edge → pattern to first step [691]
- FILL: when fully counter-clockwise → channel muted [691]
- FILL: when fully clockwise → pattern entirely filled [691]
- CHAOS: when high value → random rolls / ghost notes [691]
- swing: when external clock → not possible [691]
- swing: when euclidean mode → not possible [691]
- swing: when enabled → replaces CHAOS randomization (swing) [691]
- ACC: when euclidean mode → trigger on pattern start (euclidean) [691]
- outputs: when gate mode → high for clock's positive cycle (gate output) [691]
- 4ppqn clock: when 32nd-note patterns → may distort [691]
- 8 or 4ppqn clock: when triplet patterns → may distort [691]
- options: when entering → unplug all CV inputs [691]
- ACC (global): when any ACC 1-3 high → high (alternate output layout) [691]
- CLK output: when alternate layout → mirrors clock in use (alternate output layout) [691]

## Sources

- [691] Mutable Instruments Grids Manual (manual): https://pichenettes.github.io/mutable-instruments-documentation/modules/grids/manual/
- [692] Mutable Instruments Grids product page (product_page): https://pichenettes.github.io/mutable-instruments-documentation/modules/grids/

Full record as JSON: https://eurorackref.com/mutable-instruments/grids.json
