# Edges (Mutable Instruments)

Canonical page: https://eurorackref.com/mutable-instruments/edges/

- id: `mutable-instruments/edges`
- width: 20 HP; depth: 25 mm
- power: +12 V 70 mA, −12 V 20 mA, +5 V 45 mA
- status: current
- functions: Digital / Wavetable Oscillator, 1V/Oct Pitch Tracking, Pulse Width Modulation, Oscillator Sync, Ring Modulator, Noise Source, Mixer, Step Sequencer, Quantizer, Polyphonic Operation

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| GATE 1 | gate, clock | channel gate | not stated | unknown | — | 1050 |
| V/OCT 1 | pitch | channel frequency input | not stated | unknown | — | 1050 |
| MOD 1 | cv | frequency modulation input | not stated | not stated | — | 1050 |
| GATE 2 | gate, clock | channel gate | not stated | unknown | GATE 1 | 1050 |
| V/OCT 2 | pitch | channel frequency input | not stated | unknown | V/OCT 1 | 1050 |
| MOD 2 | cv | frequency modulation input | not stated | not stated | — | 1050 |
| GATE 3 | gate, clock | channel gate | not stated | unknown | GATE 2 | 1050 |
| V/OCT 3 | pitch | channel frequency input | not stated | unknown | V/OCT 2 | 1050 |
| MOD 3 | cv | frequency modulation input | not stated | not stated | — | 1050 |
| GATE 4 | gate, clock | channel gate | not stated | unknown | GATE 3 | 1050 |
| V/OCT 4 | pitch | channel frequency input | not stated | unknown | V/OCT 3 | 1050 |
| MOD 4 | cv | frequency modulation input | not stated | not stated | — | 1050 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| OUT 1 | audio | channel individual output | not stated | unknown | Channel 1 | 1050 |
| OUT 2 | audio | channel individual output | not stated | unknown | Channel 2 | 1050 |
| OUT 3 | audio | channel individual output | not stated | unknown | Channel 3 | 1050 |
| OUT 4 | audio | channel individual output | not stated | unknown | Channel 4 | 1050 |
| MIX | audio | mixer output | not stated | unknown | mixer | 1050 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| FREQ 1 | knob | channel frequency | — | Channel 1 | 1050 |
| WAVEFORM SELECT 1 | button | cycle channel waveshape | — | Channel 1 | 1050 |
| volume 1 | knob | channel mixer volume | — | mixer | 1050 |
| FREQ 2 | knob | channel frequency | — | Channel 2 | 1050 |
| WAVEFORM SELECT 2 | button | cycle channel waveshape | — | Channel 2 | 1050 |
| volume 2 | knob | channel mixer volume | — | mixer | 1050 |
| FREQ 3 | knob | channel frequency | — | Channel 3 | 1050 |
| WAVEFORM SELECT 3 | button | cycle channel waveshape | — | Channel 3 | 1050 |
| volume 3 | knob | channel mixer volume | — | mixer | 1050 |
| FREQ 4 | knob | channel frequency | — | Channel 4 | 1050 |
| WAVEFORM SELECT 4 | button | cycle channel waveshape | — | Channel 4 | 1050 |
| volume 4 | knob | channel mixer volume | — | mixer | 1050 |
| XMOD 1 | switch | cross-modulation enable | — | Channel 1, Channel 2 | 1050 |
| XMOD 2 | switch | cross-modulation enable | — | Channel 1, Channel 2 | 1050 |
| XMOD 3 | switch | cross-modulation enable | — | Channel 1, Channel 3 | 1050 |

## Modes

- settings [1050]
- semitone quantization [1050]
- sequencer [1050]
- sequence recording [1050]
- calibration [1050]
- CV controlled pulse width [1050]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| FREQ | range | 6 octaves | — | 1050 |
| Channels 1-3 | pulse duty cycle | 50 to 95 % | — | 1050 |
| Channels 1-3 | timer clock | 4 MHz | — | 1051 |
| Channels 1-3 | resolution | 1 bit | — | 1051 |
| Channel 4 | sample rate | 48 kHz | — | 1051 |
| Channel 4 | DAC resolution | 12 bit | — | 1051 |
| NES triangle | loudness levels | 16 levels | — | 1050 |
| CV acquisition | rate | 4 kHz | — | 1051 |
| CV acquisition | resolution | 12 bit | — | 1051 |
| sequencer | max sequence length | 8 steps | — | 1050 |
| calibration | low reference CV (C2) | 1 V | — | 1050 |
| calibration | high reference CV (C4) | 3 V | — | 1050 |
| module | width | 20 HP | — | 1050 |
| module | depth | 25 mm | — | 1051 |
| module | ±12V current | 25 mA | original manual, 2x8 version | 1050 |
| module | +5V current | 45 mA | original manual, 2x8 version | 1050 |
| module | +12V current | 70 mA | product page | 1051 |
| module | -12V current | 20 mA | product page | 1051 |
| processor | clock | 32 MHz | — | 1051 |

## Behavior

- GATE: when sequencer off → acts as binary VCA [1050]
- GATE: when signal at 0V → channel off [1050]
- GATE: when signal exceeds 0.7V → channel on [1050]
- GATE: when sequencer active → acts as clock input (sequencer) [1050]
- channel: when sequencer active → always on (sequencer) [1050]
- GATE/V/OCT: when own jack unpatched → uses previous channel's jack [1050]
- OUT: when jack plugged → channel removed from mix [1050]
- volume knob: when always → individual outputs unaffected [1050]
- MOD: when PWM waveshape selected → becomes PWM CV (CV controlled pulse width) [1050]
- Channel 4 frequency input: when PWM option, early revision → doubles as PWM control [1050]
- sequence recording: when active step pressed → recording stops (sequence recording) [1050]
- sequence recording: when next switch pressed → advances to next step (sequence recording) [1050]
- calibration: when LEDs **oo → play C2 (1V) (calibration) [1050]
- calibration: when LEDs **** → play C4 (3V) (calibration) [1050]

## Sources

- [1050] Edges Manual (full) (manual): https://pichenettes.github.io/mutable-instruments-documentation/modules/edges/manual/
- [1051] Mutable Instruments Edges product page (product_page): https://pichenettes.github.io/mutable-instruments-documentation/modules/edges/

Full record as JSON: https://eurorackref.com/mutable-instruments/edges.json
