# Blades (Mutable Instruments)

Canonical page: https://eurorackref.com/mutable-instruments/blades/

- id: `mutable-instruments/blades`
- width: 18 HP; depth: 25 mm
- power: +12 V 140 mA, −12 V 150 mA, +5 V ? mA
- status: discontinued
- functions: Lowpass Filter, Highpass Filter, Bandpass / Notch Filter, Multimode Filter, Self-Oscillating Filter, Wavefolder, Distortion / Saturation, Crossfader, 1V/Oct Pitch Tracking, Attenuverter / Offset

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| MODE CV 1 | cv, audio | filter mode CV | not stated | not stated | — | 607 |
| FREQUENCY CV 1 | cv, audio | cutoff frequency CV | not stated | not stated | — | 607 |
| RESO CV 1 | cv, audio | resonance CV | not stated | not stated | — | 607 |
| V/OCT 1 | pitch, cv | 1V/oct cutoff control | not stated | not stated | — | 607 |
| DRIVE CV 1 | cv, audio | drive CV | not stated | not stated | +2V | 607 |
| IN 1 | audio, cv | signal input | not stated | not stated | — | 607 |
| MODE CV 2 | cv, audio | filter mode CV | not stated | not stated | — | 607 |
| FREQUENCY CV 2 | cv, audio | cutoff frequency CV | not stated | not stated | — | 607 |
| RESO CV 2 | cv, audio | resonance CV | not stated | not stated | — | 607 |
| V/OCT 2 | pitch, cv | 1V/oct cutoff control | not stated | not stated | — | 607 |
| DRIVE CV 2 | cv, audio | drive CV | not stated | not stated | +2V | 607 |
| IN 2 | audio, cv | signal input | not stated | not stated | ROUTING mix of filter 1 input/output | 607 |
| ROUTING CV | cv, audio | filter routing CV | not stated | not stated | — | 607 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Filter 1 output | audio, cv | individual filter output | not stated | not stated | Filter 1 | 607 |
| Filter 2 output | audio, cv | individual filter output | not stated | not stated | Filter 2 | 607 |
| MAIN | audio, cv | filter blend output | not stated | not stated | Filter 1, Filter 2, Routing | 607 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| FREQUENCY 1 | knob | cutoff frequency | 8 to 18000 Hz | Filter 1 | 607 |
| RESO 1 | knob | resonance | — | Filter 1 | 607 |
| DRIVE 1 | knob | gain and distortion | — | Drive circuit 1, DRIVE CV 1 | 607 |
| Drive response 1 | knob | drive circuit response | — | Drive circuit 1 | 607 |
| Filter response 1 | knob | filter response | — | Filter 1 | 607 |
| FREQUENCY attenuverter 1 | knob | frequency CV attenuverter | — | FREQUENCY CV 1 | 607 |
| RESO attenuverter 1 | knob | resonance CV attenuverter | — | RESO CV 1 | 607 |
| FREQUENCY 2 | knob | cutoff frequency | 8 to 18000 Hz | Filter 2 | 607 |
| RESO 2 | knob | resonance | — | Filter 2 | 607 |
| DRIVE 2 | knob | gain and distortion | — | Drive circuit 2, DRIVE CV 2 | 607 |
| Drive response 2 | knob | drive circuit response | — | Drive circuit 2 | 607 |
| Filter response 2 | knob | filter response | — | Filter 2 | 607 |
| FREQUENCY attenuverter 2 | knob | frequency CV attenuverter | — | FREQUENCY CV 2 | 607 |
| RESO attenuverter 2 | knob | resonance CV attenuverter | — | RESO CV 2 | 607 |
| ROUTING | knob | filter signal routing | — | Routing, MAIN, Filter 2 | 607 |
| ROUTING attenuverter | knob | routing CV attenuverter | — | ROUTING CV | 607 |
| Filter cutoff coupling | button | filter cutoff coupling | — | Filter 2, FREQUENCY 2 | 607 |

## Modes

- Single (ROUTING = fully CCW) [607]
- Parallel (ROUTING = 12 o'clock) [607]
- Series (ROUTING = fully CW) [607]
- Cutoff coupling (Filter cutoff coupling = illuminated) [607]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| FREQUENCY knob | cutoff range | 8 to 18000 Hz | — | 607 |
| filter | slope | 12 dB/oct | — | 608 |
| DRIVE knob | 0dB gain position | 11 o'clock | — | 607 |
| DRIVE CV | normalled voltage | 2 V | unpatched | 607 |
| module | width | 18 HP | — | 608 |
| module | depth | 25 mm | — | 608 |
| module | +12V current | 140 mA | — | 607 |
| module | -12V current | 150 mA | — | 607 |
| module | +12V current | 150 mA | product page figure | 608 |
| module | -12V current | 140 mA | product page figure | 608 |

## Behavior

- DRIVE CV: when unpatched → 2V applied to drive [607]
- DRIVE knob: when fully CCW, unpatched → moderate non-null gain [607]
- ROUTING: when fully CCW → MAIN carries filter 1 [607]
- ROUTING: when fully CW → MAIN carries filter 2 [607]
- ROUTING: when at 12 o'clock → MAIN mixes both filters [607]
- Filter 2 input: when IN 2 unpatched → fed F1 input/output blend [607]
- ROUTING: when IN 2 patched → acts as output crossfader [607]
- Filter 2 cutoff: when coupling button illuminated → set relative to filter 1 [607]
- FREQUENCY 2: when coupled, at 12 o'clock → same cutoff as filter 1 [607]
- FREQUENCY 2: when coupled, past 12 o'clock → transposed up from filter 1 [607]
- FREQUENCY 2: when coupled, before 12 o'clock → transposed down from filter 1 [607]
- Filter response: when self-oscillating, no input → adjusts sine wave phase [607]
- Single routing: when selected → MAIN carries filter 1 [607]
- Parallel routing: when selected → both filters process input 1 [607]
- Series routing: when selected → filter 2 processes filter 1 [607]

## Sources

- [607] Blades Manual (full) (manual): https://pichenettes.github.io/mutable-instruments-documentation/modules/blades/manual/
- [608] Mutable Instruments Blades product page (product_page): https://pichenettes.github.io/mutable-instruments-documentation/modules/blades/

Full record as JSON: https://eurorackref.com/mutable-instruments/blades.json
