# VCF (Morphor)

Canonical page: https://eurorackref.com/morphor/vcf/

- id: `morphor/vcf`
- width: 8 HP; depth: 30 mm
- power: +12 V 35 mA, −12 V 50 mA, +5 V 0 mA
- status: current
- functions: Lowpass Filter, Highpass Filter, Bandpass / Notch Filter, Multimode Filter, Simultaneous Multimode Outputs, Self-Oscillating Filter

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| IN | audio | audio input | not stated | not stated | — | 2030 |
| CV (LP) | cv | LP cutoff CV | not stated | bipolar | — | 2030 |
| CV (HP) | cv | HP/BP cutoff CV | not stated | bipolar | — | 2030 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| LP OUT | audio | lowpass output | not stated | not stated | Lowpass Filter | 2030 |
| BP/HP OUT | audio | bandpass/highpass output | not stated | not stated | Highpass Filter | 2030 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| LP CUT-OFF | knob | lowpass cutoff | — | Lowpass Filter | 2030 |
| HP CUT-OFF | knob | highpass cutoff | — | Highpass Filter | 2030 |
| LP RES | knob | lowpass resonance | — | Lowpass Filter | 2030 |
| HP RES | knob | highpass resonance | — | Highpass Filter | 2030 |
| LP SLOPE | switch | lowpass slope | — | Lowpass Filter | 2030 |
| HP SLOPE | switch | highpass slope | — | Highpass Filter | 2030 |
| BP/HP MIX | knob | BP/HP blend | — | HP/BP Selection, BP/HP OUT | 2030 |

## Modes

- LP 24 dB (LP SLOPE = 24 dB) [2030]
- LP 12 dB (LP SLOPE = 12 dB) [2030]
- LP 6 dB (LP SLOPE = 6 dB) [2030]
- HP 24 dB (HP SLOPE = 24 dB) [2030]
- HP 12 dB (HP SLOPE = 12 dB) [2030]
- HP 6 dB (HP SLOPE = 6 dB) [2030]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 8 HP | — | 2030 |
| module | depth | 30 mm | — | 2031 |
| module | maximum depth | 40 mm | incl. power cable | 2030 |
| module | +12V current | 35 mA | — | 2030 |
| module | -12V current | 50 mA | — | 2030 |
| module | +5V current | 0 mA | — | 2031 |
| filters | slope | 6 to 24 dB | LP/HP SLOPE switch | 2030 |
| inputs | input impedance | 100 kOhm | — | 2030 |
| outputs | output impedance | 1 kOhm | — | 2030 |

## Behavior

- RES: when turned high enough → filter self-oscillates [2030]
- BP/HP MIX: when turned → sets lowpass amount on BP/HP [2030]
- BP/HP MIX: when BP end → strong bandpass [2030]
- BP/HP MIX: when HP end → clean highpass [2030]

## Sources

- [2030] Morphor VCF manual (manual): https://morphor.io/manuals/VCF-Multimode.pdf
- [2031] Morphor VCF product page (product_page): https://morphor.io/products/modules/vcf-multimode/

Full record as JSON: https://eurorackref.com/morphor/vcf.json
