# Echo (Morphor)

Canonical page: https://eurorackref.com/morphor/echo/

- id: `morphor/echo`
- width: 20 HP; depth: 38 mm
- power: +12 V 155 mA, −12 V 120 mA, +5 V 50 mA
- status: current
- functions: Delay, Stereo Inputs / Outputs, Stereo Panning, Tempo / Clock Sync, Send / return

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| IN | audio | signal to delay | -5 to 5 V | bipolar | — | 1983 |
| DELAY CV | cv | delay time CV | -5 to 5 V | bipolar | — | 1983 |
| SYNC IN | clock | external clock sync | ≤ 5 V | not stated | — | 1983 |
| MIX CV | cv | dry/wet mix CV | -5 to 5 V | bipolar | — | 1983 |
| SPREAD CV | cv | spread CV | -5 to 5 V | bipolar | — | 1983 |
| FEEDBACK CV | cv | feedback amount CV | -5 to 5 V | bipolar | — | 1983 |
| FEEDBACK IN | audio | external feedback input | not stated | not stated | TAP 4 OUT | 1983 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| TAP 1 OUT | audio | tap 1 output | -5 to 5 V | bipolar | BBD delay | 1983 |
| TAP 2 OUT | audio | tap 2 output | -5 to 5 V | bipolar | BBD delay | 1983 |
| TAP 3 OUT | audio | tap 3 output | -5 to 5 V | bipolar | BBD delay | 1983 |
| TAP 4 OUT | audio | tap 4 output | -5 to 5 V | bipolar | BBD delay | 1983 |
| TAP 4 MIX OUT L | audio | tap 4+dry left | -5 to 5 V | bipolar | BBD delay, dry/wet mix, stereo panner | 1983 |
| TAP 4 MIX OUT R | audio | tap 4+dry right | -5 to 5 V | bipolar | BBD delay, dry/wet mix, stereo panner | 1983 |
| ALL TAPS MIX OUT L | audio | all taps+dry left | -5 to 5 V | bipolar | BBD delay, dry/wet mix, stereo panner | 1983 |
| ALL TAPS MIX OUT R | audio | all taps+dry right | -5 to 5 V | bipolar | BBD delay, dry/wet mix, stereo panner | 1983 |
| TEMPO OUT | clock | multiplied/divided tempo | not stated | not stated | tempo clock | 1983 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| input attenuator | knob | input level | — | IN, BBD delay | 1983 |
| DELAY | knob | delay time | 10 to 2040 ms | BBD delay, tempo clock | 1983 |
| A/B switch | switch | filter tracking/CV mode | — | tracking low-pass filter, DELAY CV | 1983 |
| TAP TEMPO | button | tap tempo/mode indicator | — | tempo clock, BBD delay | 1983 |
| MIX | knob | dry/wet balance | — | dry/wet mix | 1983 |
| PAN MODE | switch | panning mode select | — | stereo panner | 1983 |
| SPREAD | knob | stereo width | — | stereo panner | 1983 |
| FEEDBACK | knob | feedback amount | — | BBD delay | 1983 |
| PHASE INV | switch | feedback phase inversion | — | BBD delay | 1983 |
| DELAY CV attenuator | knob | DELAY CV amount | — | DELAY CV | 1983 |
| MIX CV attenuator | knob | MIX CV amount | — | MIX CV | 1983 |
| SPREAD CV attenuator | knob | SPREAD CV amount | — | SPREAD CV | 1983 |
| FEEDBACK CV attenuator | knob | FEEDBACK CV amount | — | FEEDBACK CV | 1983 |
| PPQN jumper | jumper | sync input resolution | — | SYNC IN | 1983 |
| 5 V selector switch | switch | +5V supply source | — | — | 1983 |

## Modes

- continuous [1983]
- tap sync (TAP TEMPO = tapped) [1983]
- sync [1983]
- Ping-Pong (PAN MODE = PING PONG) [1983]
- Traverse (PAN MODE = TRAVERSE) [1983]
- Chaos (PAN MODE = CHAOS) [1983]
- early tracking [1983]
- late tracking [1983]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 20 HP | — | 1983 |
| module | depth | 38 mm | manual, incl. power connector | 1983 |
| module | depth | 33 mm | product page | 1984 |
| module | +12V current | 155 mA | 5 V FROM RACK | 1983 |
| module | +12V current | 205 mA | 5 V INTERNAL | 1983 |
| module | -12V current | 120 mA | — | 1983 |
| module | +5V current | 50 mA | 5 V FROM RACK | 1983 |
| module | +5V current | 0 mA | 5 V INTERNAL | 1984 |
| module | mass | 245 g | — | 1983 |
| BBD delay | delay time | 10 to 2040 ms | — | 1983 |
| BBD delay | BBD stages | 4096 stages | per BBD, 4 BBDs | 1983 |
| DELAY | multiplier/divider values | 1 to 6 ratio | sync mode: 1,1.5,2,3,4,5,6 | 1983 |
| DELAY CV | delay variation | -25 to 25 % | sync, position B | 1983 |
| TAP TEMPO | taps to set tempo | ≥ 4 taps | — | 1983 |
| SYNC IN | pulses to set tempo | 4 pulses | 1 PPQN | 1983 |
| SYNC IN | pulses to set tempo | 24 pulses | 24 PPQN | 1983 |
| SYNC IN | clock resolution | 1 PPQN | jumper 1 PPQN | 1983 |
| SYNC IN | clock resolution | 24 PPQN | jumper 24 PPQN | 1983 |
| TAP TEMPO | firmware update hold | ≥ 3 s | — | 1983 |

## Behavior

- FEEDBACK IN: when patched → replaces Tap 4 feedback [1983]
- FEEDBACK: when unpatched FEEDBACK IN → Tap 4 feeds back [1983]
- TAP 4 MIX OUT: when R unpatched → all summed mono on L [1983]
- ALL TAPS MIX OUT: when R unpatched → all summed mono on L [1983]
- TAP TEMPO: when tapped → switches to tap sync mode [1983]
- module: when at startup → continuous mode [1983]
- DELAY: when sync mode → acts as clock multiplier (sync) [1983]
- DELAY: when turned CCW in sync → divides tempo (sync) [1983]
- DELAY: when turned CW in sync → multiplies tempo (sync) [1983]
- A/B switch: when position A, sync → CV quantized multiplier/divisor (sync) [1983]
- A/B switch: when position B, sync → CV continuous, ratio fixed (sync) [1983]
- A/B switch: when switching A to B → current time kept as center (sync) [1983]
- A/B switch: when non-sync mode → selects early/late filter tracking (continuous) [1983]
- filter tracking: when switching to sync mode → selected tracking stays active [1983]
- PPQN jumper: when setting changed → restart required [1983]
- SYNC IN: when 1 PPQN → needs 4 pulses (sync) [1983]
- SYNC IN: when 24 PPQN → needs 24 pulses (sync) [1983]
- TEMPO OUT: when any PPQN setting → ignores PPQN setting [1983]
- TAP 4 MIX OUT: when any pan mode → tap 4 panned by Spread [1983]
- SPREAD: when at zero (center) → all taps centered mono [1983]
- SPREAD: when negative, Ping-Pong → Tap 4 left, Tap 3 right (Ping-Pong) [1983]
- SPREAD: when positive, Ping-Pong → Tap 4 right, Tap 3 left (Ping-Pong) [1983]
- SPREAD: when negative, Traverse → traverse right to left (Traverse) [1983]
- SPREAD: when positive, Traverse → traverse left to right (Traverse) [1983]
- SPREAD: when positive, Chaos → independent random L/R panning (Chaos) [1983]
- SPREAD: when negative, Chaos → L/R inversely proportional, sum 100% (Chaos) [1983]
- Chaos: when any spread → L+R never exceeds 100% (Chaos) [1983]

## Sources

- [1983] Morphor Echo manual (manual): https://morphor.io/manuals/Echo-Analogue-Quad-Tap-BBD-Stereo-Delay.pdf
- [1984] Morphor Echo product page (product_page): https://morphor.io/products/modules/echo-quad-tap-bbd-stereo-delay/

Full record as JSON: https://eurorackref.com/morphor/echo.json
