# Farb Highpass (Making Sound Machines)

Canonical page: https://eurorackref.com/making-sound-machines/farb-highpass/

- id: `making-sound-machines/farb-highpass`
- width: 4 HP; depth: unknown mm
- power: +12 V 85 mA, −12 V 50 mA, +5 V ? mA
- status: current
- functions: Highpass Filter, Self-Oscillating Filter

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Audio In | audio | audio input | -5 to 5 V | bipolar | — | 2039 |
| Cutoff CV | cv | cutoff CV | -10 to 10 V | unknown | — | 2039 |
| Resonance CV | cv | resonance CV | 0 to 10 V | unipolar | — | 2039 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Audio Out | audio | processed output | not stated | unknown | ladder highpass filter | 2039 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Tilt | knob | frequency bias | — | Tilt EQ | 2039 |
| Cutoff | knob | cutoff frequency | — | ladder highpass filter, Cutoff CV | 2039 |
| Resonance | knob | resonance / CV attenuator | — | ladder highpass filter, Resonance CV | 2039 |
| trim potentiometer | other | cutoff voltage range trim | — | Cutoff, Cutoff CV | 2039 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 4 HP | — | 2039 |
| module | +12V current | 85 mA | — | 2039 |
| module | -12V current | 50 mA | — | 2039 |
| Cutoff CV | input range span | 10 V | shifted by Cutoff knob | 2039 |

## Behavior

- Cutoff knob: when Cutoff CV patched → acts as CV offset [2039]
- Cutoff CV range: when Cutoff knob fully CCW → accepts 0V to 10V [2039]
- Cutoff CV range: when Cutoff knob fully CW → accepts -10V to 0V [2039]
- Cutoff: when knob fully CCW → all frequencies pass [2039]
- Cutoff: when knob fully CW → only highest overtones remain [2039]
- Resonance knob: when Resonance CV patched → becomes input attenuator [2039]
- Resonance: when knob fully CCW → resonance off [2039]
- Resonance: when knob about 2 o'clock → filter self-resonates [2039]
- Resonance: when knob at 3 o'clock → rings, suppresses input signal [2039]
- Resonance: when above 3 o'clock → unstable, cutoff dependent [2039]
- Resonance emphasis: when Cutoff set higher → more pronounced [2039]
- Tilt: when 12 o'clock → neutral classic ladder sound [2039]

## Sources

- [2039] Making Sound Machines Farb Highpass manual (manual): https://makingsoundmachines.com/farbhighpass/manual/

Full record as JSON: https://eurorackref.com/making-sound-machines/farb-highpass.json
