# Wogglebug (Make Noise)

Canonical page: https://eurorackref.com/make-noise/wogglebug/

- id: `make-noise/wogglebug`
- width: 10 HP; depth: 32 mm
- power: +12 V 50 mA, −12 V 40 mA, +5 V ? mA
- status: current
- functions: Random / Sample & Hold CV, Master Clock, Slew Limiter, Ring Modulator, Chaotic / Complex Modulation

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Influence Input | cv, audio | FM and ring-mod input | 0 to 10 V | not stated | — | 727 |
| Ego Input | audio, cv | direct signal injection | not stated | not stated | — | 727 |
| External Clock Input | clock | external S&H clock | not stated | not stated | — | 727 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Smooth VCO Output | audio | shark's fin wave | not stated | not stated | Smooth VCO | 727 |
| Ring-Mod Output | audio | ring mod pulse wave | not stated | not stated | Ring-Mod circuit | 727 |
| Woggle VCO Output | audio | square wave | not stated | not stated | Woggle VCO | 727 |
| SMOOTH OUT | cv | smooth random CV | 0 to 10 V | unipolar | Smooth CV circuit | 727 |
| Stepped Output | cv | stepped random voltage | 0 to 10 V | unipolar | Sample & Hold | 727 |
| Woggle CV OUT | cv | woggle CV | 0 to 10 V | unipolar | Woggle circuit | 727 |
| Burst Output | gate | random gate bursts | 0 to 10 V | unipolar | Burst generator | 727 |
| Clock Output | clock | internal clock square | not stated | not stated | Internal Clock | 727 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Woggle Control | knob | woggle catch speed | — | Woggle circuit, Woggle VCO | 727 |
| Disturb Button | button | manual sample/hold | — | Sample & Hold | 727 |
| Speed/Chaos Control | knob | clock rate and lag | — | Internal Clock, Smooth CV circuit | 727 |
| Ego/Id Balance | knob | ego/id balance | — | Sample & Hold, Smooth VCO, Woggle VCO, Ring-Mod circuit | 727 |
| Speed Attenuator | knob | jitter amount | — | Internal Clock | 727 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Internal Clock | rate range | ≤ 40 Hz | minimum 1 minute per cycle | 727 |
| Internal Clock | extended upper rate | 200 Hz | extended range | 727 |
| Smooth VCO Output | level | 10 Vpp | — | 727 |
| Ring-Mod Output | level | 10 Vpp | — | 727 |
| Woggle VCO Output | level | 10 Vpp | — | 727 |
| Stepped Output | range | 10 Vpp | — | 727 |
| module | width | 10 hp | — | 727 |
| module | max depth | 32 mm | — | 728 |
| module | +12V current | 50 mA | — | 727 |
| module | -12V current | 40 mA | — | 727 |

## Behavior

- Stepped Output: when each clock pulse → new random value [727]
- Ego Input: when audio at high clock, Ego/Id CCW → bit reduction effects [727]
- Wogglebug: when system locks up → CV outputs hang, VCOs drone [727]
- Wogglebug: when locked up, control adjusted → system wakes [727]
- Sample & Hold: when External Clock Input patched → clock freed from S&H [727]
- Clock Output: when External Clock or Disturb used → keeps running at set rate [727]
- Ring-Mod circuit: when audio at Influence Input → included in ring-mod product [727]
- Smooth CV: when Speed/Chaos CW → response becomes jittery [727]

## Sources

- [727] Make Noise Wogglebug Manual (manual): https://www.makenoisemusic.com/wp-content/uploads/2024/03/wogglebugmanual.pdf
- [728] Make Noise Wogglebug product page (product_page): https://www.makenoisemusic.com/modules/wogglebug/

Full record as JSON: https://eurorackref.com/make-noise/wogglebug.json
