# René (Make Noise)

Canonical page: https://eurorackref.com/make-noise/rene/

- id: `make-noise/rene`
- width: 34 HP; depth: 32 mm
- power: +12 V 235 mA, −12 V 0 mA, +5 V ? mA
- status: current
- functions: Step Sequencer, Quantizer, Random / Sample & Hold CV, Slew Limiter

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| X-CLK | clock, gate | X clock | not stated | not stated | — | 238 |
| X-MOD | gate, trigger | X MODifier gate | not stated | not stated | — | 238 |
| X-CV (in) | cv | X control voltage | 0 to 5 V | unipolar | +5V | 238 |
| Y-CLK | clock, gate | Y clock | not stated | not stated | — | 238 |
| Y-MOD | gate, trigger | Y MODifier gate | not stated | not stated | — | 238 |
| Y-CV (in) | cv | Y control voltage | 0 to 5 V | unipolar | +5V | 238 |
| Z-MOD | gate, trigger | next enabled STATE | not stated | not stated | — | 238 |
| Z-CV | cv | STATE select, Global Reset | 0 to 5 V | unipolar | — | 238 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| X-CV (out) | cv, pitch | X sequence CV | not stated | unipolar | X/Red Channel, Quantizer | 238 |
| X-G | gate, trigger | X gate output | 0 to 8 V | unipolar | X/Red Channel | 238 |
| Y-CV (out) | cv, pitch | Y sequence CV | not stated | unipolar | Y/Green Channel, Quantizer | 238 |
| Y-G | gate, trigger | Y gate output | 0 to 8 V | unipolar | Y/Green Channel | 238 |
| C-CV (out) | cv, pitch | C sequence CV | not stated | unipolar | C/Orange Channel, Quantizer | 238 |
| C-G | gate, trigger | C gate output | 0 to 8 V | unipolar | C/Orange Channel | 238 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| CV Knob 1 | knob | location 1 CV value | — | X/Red Channel, Y/Green Channel, C/Orange Channel | 238 |
| CV Knob 2 | knob | location 2 CV value | — | X/Red Channel, Y/Green Channel, C/Orange Channel | 238 |
| CV Knob 3 | knob | location 3 CV value | — | X/Red Channel, Y/Green Channel, C/Orange Channel | 238 |
| CV Knob 4 | knob | location 4 CV value | — | X/Red Channel, Y/Green Channel, C/Orange Channel | 238 |
| CV Knob 5 | knob | location 5 CV value | — | X/Red Channel, Y/Green Channel, C/Orange Channel | 238 |
| CV Knob 6 | knob | location 6 CV value | — | X/Red Channel, Y/Green Channel, C/Orange Channel | 238 |
| CV Knob 7 | knob | location 7 CV value | — | X/Red Channel, Y/Green Channel, C/Orange Channel | 238 |
| CV Knob 8 | knob | location 8 CV value | — | X/Red Channel, Y/Green Channel, C/Orange Channel | 238 |
| CV Knob 9 | knob | location 9 CV value | — | X/Red Channel, Y/Green Channel, C/Orange Channel | 238 |
| CV Knob 10 | knob | location 10 CV value | — | X/Red Channel, Y/Green Channel, C/Orange Channel | 238 |
| CV Knob 11 | knob | location 11 CV value | — | X/Red Channel, Y/Green Channel, C/Orange Channel | 238 |
| CV Knob 12 | knob | location 12 CV value | — | X/Red Channel, Y/Green Channel, C/Orange Channel | 238 |
| CV Knob 13 | knob | location 13 CV value | — | X/Red Channel, Y/Green Channel, C/Orange Channel | 238 |
| CV Knob 14 | knob | location 14 CV value | — | X/Red Channel, Y/Green Channel, C/Orange Channel | 238 |
| CV Knob 15 | knob | location 15 CV value | — | X/Red Channel, Y/Green Channel, C/Orange Channel | 238 |
| CV Knob 16 | knob | location 16 CV value | — | X/Red Channel, Y/Green Channel, C/Orange Channel | 238 |
| Button 1 | button | grid location 1 | — | X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis | 238 |
| Button 2 | button | grid location 2 | — | X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis | 238 |
| Button 3 | button | grid location 3 | — | X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis | 238 |
| Button 4 | button | grid location 4 | — | X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis | 238 |
| Button 5 | button | grid location 5 | — | X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis | 238 |
| Button 6 | button | grid location 6 | — | X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis | 238 |
| Button 7 | button | grid location 7 | — | X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis | 238 |
| Button 8 | button | grid location 8 | — | X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis | 238 |
| Button 9 | button | grid location 9 | — | X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis | 238 |
| Button 10 | button | grid location 10 | — | X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis | 238 |
| Button 11 | button | grid location 11 | — | X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis | 238 |
| Button 12 | button | grid location 12 | — | X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis | 238 |
| Button 13 | button | grid location 13 | — | X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis | 238 |
| Button 14 | button | grid location 14 | — | X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis | 238 |
| Button 15 | button | grid location 15 | — | X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis | 238 |
| Button 16 | button | grid location 16 | — | X/Red Channel, Y/Green Channel, C/Orange Channel, Z Axis | 238 |
| X-CV Combo Pot | knob | X-CV attenuator, 5V offset | — | X-CV (in) | 238 |
| Y-CV Combo Pot | knob | Y-CV attenuator, 5V offset | — | Y-CV (in) | 238 |
| X Channel Button | button | select X channel, Latch | — | X/Red Channel | 238 |
| Y Channel Button | button | select Y channel, Latch | — | Y/Green Channel | 238 |
| C Channel Button | button | select C channel, Latch | — | C/Orange Channel | 238 |
| Left Button | button | previous Program Page | — | X/Red Channel, Y/Green Channel, C/Orange Channel | 238 |
| Right Button | button | next Program Page | — | X/Red Channel, Y/Green Channel, C/Orange Channel | 238 |
| FUN.OP.SLEEP | menu_setting | non-ACCESS location behavior | — | X/Red Channel, Y/Green Channel, C/Orange Channel | 238 |
| FUN.OP.TRIG | menu_setting | gate width, gate ties | — | X-G, Y-G, C-G | 238 |
| FUN.OP.SCAN | menu_setting | write knobs to channel | — | X/Red Channel, Y/Green Channel, C/Orange Channel | 238 |
| FUN.MOD.RESET | menu_setting | MOD resets channel | — | X/Red Channel, Y/Green Channel, C/Orange Channel | 238 |
| FUN.MOD.CLK | menu_setting | MOD adds clocks | — | X/Red Channel, Y/Green Channel, C/Orange Channel | 238 |
| FUN.MOD.RUNSTP | menu_setting | MOD runs/stops channel | — | X/Red Channel, Y/Green Channel, C/Orange Channel | 238 |
| FUN.CV.ADD | menu_setting | CV added to location | — | X/Red Channel, Y/Green Channel | 238 |
| FUN.CV.LOC | menu_setting | CV addresses location | — | X/Red Channel, Y/Green Channel, C/Orange Channel | 238 |
| FUN.CV.SNAKE | menu_setting | CV selects Snake pattern | — | X/Red Channel, Y/Green Channel | 238 |
| FUN.CV.S&H | menu_setting | MOD-sampled CV add | — | X/Red Channel, Y/Green Channel | 238 |
| GL.Z.ON | menu_setting | Z inputs always active | — | Z Axis | 238 |
| GBL.Z.RESET | menu_setting | State change resets channels | — | Z Axis, X/Red Channel, Y/Green Channel, C/Orange Channel | 238 |
| GBL.BUS | menu_setting | Select Bus behavior | — | Select Bus | 238 |
| GBL.STORE | menu_setting | store all States | — | Z Axis | 238 |

## Modes

- ACCESS [238]
- GATE [238]
- GLIDE [238]
- SNAKE [238]
- FUN [238]
- QUANT [238]
- LATCH [238]
- Select STATE (Y Channel Button = State Pages) [238]
- M-Paste (X Channel Button = State Pages) [238]
- Global (C Channel Button = State Pages) [238]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| CV outputs | range | 0 to 4 octaves | — | 238 |
| QUANT octave range | selectable range | 1 to 4 octaves | — | 238 |
| clock/MOD inputs | min pulse width | ≥ 2.5 ms | — | 238 |
| clock/MOD inputs | min amplitude | ≥ 2.5 V | — | 238 |
| module | STATEs | 64 states | — | 238 |
| module | banks | 4 banks of 16 | — | 238 |
| channel | locations | 16 locations | — | 238 |
| Snake | patterns | 16 patterns | — | 238 |
| STORE | duration | 8 to 10 s | — | 238 |
| calibration | duration | 2 to 3 min | — | 238 |
| Select Bus | baud rate | 31250 bps | — | 238 |
| Select Bus | modules per bus board | ≤ 20 modules | — | 238 |
| module | power +12V | 235 mA | — | 238 |
| module | power -12V | 0 mA | — | 238 |
| module | width | 34 HP | — | 238 |
| module | max depth | 32 mm | — | 239 |

## Behavior

- C channel: when X-CLK pulse → moves horizontally [238]
- C channel: when Y-CLK pulse → moves vertically [238]
- Location: when ACCESS OFF → skipped by sequence [238]
- Location: when GATE ON → gate output fires [238]
- Location: when GLIDE ON → CV glides to value [238]
- LATCH page: when locations touched → overrides ACCESS and GATE [238]
- LATCH page: when nothing selected → reverts to ACCESS/GATE [238]
- Latched location: when reached → always outputs gate [238]
- C single-location Latch: when set → no gates at clock rate [238]
- FUN.OP.SLEEP: when ON, non-ACCESS location → CV rests one clock [238]
- FUN.OP.SLEEP: when OFF → skips non-ACCESS locations [238]
- C channel SLEEP: when induced by an axis → only that axis wakes [238]
- FUN.OP.TRIG: when ON, Gate+Glide location → gate held (tie) [238]
- C-G: when C TRIG OFF, gate location → combines X/Y clock highs [238]
- FUN.MOD.RESET: when MOD rising edge → reset to nearest Location 1 [238]
- FUN.MOD.CLK: when MOD pulse → extra clock advance [238]
- FUN.MOD.CLK: when CLOCK held high → MOD input masked [238]
- FUN.MOD.RUNSTP: when MOD low → channel stops [238]
- FUN.MOD.RUNSTP / DIR: when both → mutually exclusive [238]
- FUN.CV.ADD / S&H: when both → mutually exclusive [238]
- FUN.CV.S&H: when MOD rising edge → CV sampled and added [238]
- FUN.CV.S&H: when cable removed → holds indefinitely [238]
- FUN.CV.SNAKE: when turned OFF → current pattern remains [238]
- FUN.CV.LOC: when clock arrives → start point increments [238]
- Quantizer: when no octave range selected → unquantized, maximum range [238]
- QUANT octave range: when changed → knob values redistributed [238]
- Knob: when turned → applies when location reached [238]
- Z-MOD / Z-CV: when GL.Z.ON OFF → active only on Select STATE [238]
- Z-MOD: when gate on Select STATE page → next enabled STATE [238]
- GBL.Z.RESET: when ON, State selected → all channels reset [238]
- Z-MOD: when Z.RESET ON, Z.ON OFF → global reset, no State change [238]
- STORE: when in progress → sequencing stops [238]
- power-up: when always → last stored State loaded [238]
- power-up: when first boot view → X ACCESS page [238]
- Multi-Paste: when performed → all States M-Paste disabled [238]
- Multi-Paste: when always → into one Bank at once [238]
- State: when always → at least one enabled [238]
- GBL.BUS: when Lead → transmits State actions [238]
- GBL.BUS: when Follow → matches Select Bus State [238]
- GBL.BUS: when default → Free [238]
- calibration: when not stored afterwards → lost at power-off [238]

## Sources

- [238] René Manual (current; the post-Classic three-channel sequencer) (manual): https://www.makenoisemusic.com/wp-content/uploads/2024/03/renemanual.pdf
- [239] Make Noise René product page (product_page): https://www.makenoisemusic.com/modules/rene/

Full record as JSON: https://eurorackref.com/make-noise/rene.json
