# QMMG (Make Noise)

Canonical page: https://eurorackref.com/make-noise/qmmg/

- id: `make-noise/qmmg`
- width: 24 HP; depth: 32 mm
- power: +12 V 65 mA, −12 V 65 mA, +5 V ? mA
- status: current
- functions: Lowpass Gate, VCA, Lowpass Filter, Highpass Filter, Multimode Filter, Mixer, Vactrol

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Signal IN 1 | audio, cv | signal input | not stated | not stated | — | 446 |
| Control IN 1 | cv | gate control input | not stated | bipolar | — | 446 |
| Feedback Control IN 1 | cv | feedback amount CV | not stated | not stated | — | 446 |
| Signal IN 2 | audio, cv | signal input | not stated | not stated | Signal OUT 1 | 446 |
| Control IN 2 | cv | gate control input | not stated | bipolar | Control IN 1 | 446 |
| Feedback Control IN 2 | cv | feedback amount CV | not stated | not stated | — | 446 |
| Signal IN 3 | audio, cv | signal input | not stated | not stated | Signal OUT 4 | 446 |
| Control IN 3 | cv | gate control input | not stated | bipolar | Control IN 4 | 446 |
| Feedback Control IN 3 | cv | feedback amount CV | not stated | not stated | — | 446 |
| Signal IN 4 | audio, cv | signal input | not stated | not stated | — | 446 |
| Control IN 4 | cv | gate control input | not stated | bipolar | — | 446 |
| Feedback Control IN 4 | cv | feedback amount CV | not stated | not stated | — | 446 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Signal OUT 1 | audio, cv | channel output | not stated | not stated | Channel 1 | 446 |
| Signal OUT 2 | audio, cv | channel output | not stated | not stated | Channel 2 | 446 |
| Signal OUT 3 | audio, cv | channel output | not stated | not stated | Channel 3 | 446 |
| Signal OUT 4 | audio, cv | channel output | not stated | not stated | Channel 4 | 446 |
| MIX OUT | audio, cv | sum of channels | not stated | not stated | MIX | 446 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Control Offset 1 | knob | gate control offset | 0 to 8 V | Channel 1 | 446 |
| Feedback Manual Control 1 | knob | feedback amount | 0 to 100 % | Channel 1 | 446 |
| Mode Selection 1 | switch | gate mode select | — | Channel 1 | 446 |
| Control Offset 2 | knob | gate control offset | 0 to 8 V | Channel 2 | 446 |
| Feedback Manual Control 2 | knob | feedback amount | 0 to 100 % | Channel 2 | 446 |
| Mode Selection 2 | switch | gate mode select | — | Channel 2 | 446 |
| Control Offset 3 | knob | gate control offset | 0 to 8 V | Channel 3 | 446 |
| Feedback Manual Control 3 | knob | feedback amount | 0 to 100 % | Channel 3 | 446 |
| Mode Selection 3 | switch | gate mode select | — | Channel 3 | 446 |
| Control Offset 4 | knob | gate control offset | 0 to 8 V | Channel 4 | 446 |
| Feedback Manual Control 4 | knob | feedback amount | 0 to 100 % | Channel 4 | 446 |
| Mode Selection 4 | switch | gate mode select | — | Channel 4 | 446 |

## Modes

- VCA (Mode Selection = VCA) [446]
- BOTH (Mode Selection = BOTH) [446]
- LP (Mode Selection = LP) [446]
- HP (Mode Selection = HP) [446]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Control Offset | range | 0 to 8 V | — | 446 |
| Feedback Manual Control | range | 0 to 100 % amplitude | — | 446 |
| Feedback | additional gain | 50 % | VCA mode | 446 |
| BOTH mode | recommended pulse amplitude | ≥ 8 V | BOTH mode | 446 |
| module | power +12V | 65 mA | — | 446 |
| module | power -12V | 65 mA | — | 446 |
| module | width | 24 HP | — | 447 |
| module | max depth | 32 mm | — | 447 |
| module | vactrols | ≥ 8 vactrols | — | 446 |
| module | channels | 4 channels | — | 446 |

## Behavior

- Control IN: when positive signal → adds to Control Offset [446]
- Control IN: when negative signal → subtracts from Control Offset [446]
- Feedback Control IN: when patched → adds to manual feedback [446]
- Signal IN 2: when unpatched → receives Signal OUT 1 [446]
- Signal IN 3: when unpatched → receives Signal OUT 4 [446]
- Control IN 2: when unpatched → receives Control IN 1 [446]
- Control IN 3: when unpatched → receives Control IN 4 [446]
- MIX OUT: when channel Signal OUT patched → channel removed from mix [446]
- Feedback: when Manual Control at noon → signal unattenuated (VCA) [446]
- Gate: when control more positive → louder and brighter (BOTH) [446]
- Feedback: when increased → damps ringing (BOTH) [446]
- Gate: when closed, touch of feedback → signal leakage stopped (BOTH) [446]
- Gate: when fast envelope >8V applied → acoustic-like ringing transients (BOTH) [446]
- Gate: when control less positive → high frequencies attenuated (LP) [446]
- Gate: when low control levels → amplitude also reduced (LP) [446]
- Gate: when control more positive → low frequencies attenuated (HP) [446]
- Gate: when highest control levels → amplitude also affected (HP) [446]
- Feedback: when increased → output amplitude rises greatly (LP) [446]
- Feedback: when increased → output amplitude rises greatly (HP) [446]

## Sources

- [446] Make Noise QMMG Manual (manual): https://www.makenoise-manuals.com/qmmg/qmmg-manual.pdf
- [447] Make Noise QMMG product page (product_page): https://www.makenoisemusic.com/modules/qmmg/

Full record as JSON: https://eurorackref.com/make-noise/qmmg.json
