# Pressure Points (Make Noise)

Canonical page: https://eurorackref.com/make-noise/pressure-points/

- id: `make-noise/pressure-points`
- width: 20 HP; depth: 32 mm
- power: +12 V 20 mA, −12 V 0 mA, +5 V ? mA
- status: current
- functions: Manual Controller

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| EXPAND | — | BRAINS / chain header | not stated | unknown | — | 647 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| X OUT | cv, pitch | tuned voltage out | not stated | not stated | Stage 1, Stage 2, Stage 3, Stage 4 | 647 |
| Y OUT | cv, pitch | tuned voltage out | not stated | not stated | Stage 1, Stage 2, Stage 3, Stage 4 | 647 |
| Z OUT | cv, pitch | tuned voltage out | not stated | not stated | Stage 1, Stage 2, Stage 3, Stage 4 | 647 |
| Gate Output 1 | gate | touch gate | not stated | not stated | Stage 1 | 647 |
| Gate Output 2 | gate | touch gate | not stated | not stated | Stage 2 | 647 |
| Gate Output 3 | gate | touch gate | not stated | not stated | Stage 3 | 647 |
| Gate Output 4 | gate | touch gate | not stated | not stated | Stage 4 | 647 |
| Press Output 1 | cv | pressure control signal | not stated | not stated | Stage 1 | 647 |
| Press Output 2 | cv | pressure control signal | not stated | not stated | Stage 2 | 647 |
| Press Output 3 | cv | pressure control signal | not stated | not stated | Stage 3 | 647 |
| Press Output 4 | cv | pressure control signal | not stated | not stated | Stage 4 | 647 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Touchplate 1 | other | touch stage select | — | Stage 1, Gate Output 1, Press Output 1 | 647 |
| Touchplate 2 | other | touch stage select | — | Stage 2, Gate Output 2, Press Output 2 | 647 |
| Touchplate 3 | other | touch stage select | — | Stage 3, Gate Output 3, Press Output 3 | 647 |
| Touchplate 4 | other | touch stage select | — | Stage 4, Gate Output 4, Press Output 4 | 647 |
| Stage 1 X Tuned Voltage | knob | tuned voltage | — | X OUT | 647 |
| Stage 1 Y Tuned Voltage | knob | tuned voltage | — | Y OUT | 647 |
| Stage 1 Z Tuned Voltage | knob | tuned voltage | — | Z OUT | 647 |
| Stage 2 X Tuned Voltage | knob | tuned voltage | — | X OUT | 647 |
| Stage 2 Y Tuned Voltage | knob | tuned voltage | — | Y OUT | 647 |
| Stage 2 Z Tuned Voltage | knob | tuned voltage | — | Z OUT | 647 |
| Stage 3 X Tuned Voltage | knob | tuned voltage | — | X OUT | 647 |
| Stage 3 Y Tuned Voltage | knob | tuned voltage | — | Y OUT | 647 |
| Stage 3 Z Tuned Voltage | knob | tuned voltage | — | Z OUT | 647 |
| Stage 4 X Tuned Voltage | knob | tuned voltage | — | X OUT | 647 |
| Stage 4 Y Tuned Voltage | knob | tuned voltage | — | Y OUT | 647 |
| Stage 4 Z Tuned Voltage | knob | tuned voltage | — | Z OUT | 647 |
| Touch Sensitivity Adjustment Potentiometer | knob | touch sensitivity | — | Touchplate 1, Touchplate 2, Touchplate 3, Touchplate 4 | 647 |
| Digit Trimmer | other | internal finger sensitivity trim | — | Touchplate 1, Touchplate 2, Touchplate 3, Touchplate 4 | 647 |
| Close 4 Master | jumper | chain master setting | — | Combined BUS | 647 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | power +12V | 20 mA | — | 647 |
| module | power -12V | 0 mA | — | 647 |
| module | width | 20 HP | — | 648 |
| module | max depth | 32 mm | — | 648 |
| top row Tuned Voltages | range | 0 to 8 V | — | 647 |
| Digit Trimmer | default setting | 40 % CW | — | 647 |
| chain | max modules | 4 modules | — | 647 |
| BRAINS | max Pressure Points attached | 2 modules | — | 647 |
| module | stages | 4 stages | — | 647 |
| stage | tuned voltages | 3 voltages | — | 647 |

## Behavior

- Touchplate: when touched → gate high, stage activated [647]
- X/Y/Z OUT: when stage activated → outputs that stage's voltages [647]
- Press Output: when more finger pressed down → higher control voltage [647]
- Gate/Press Outputs: when chained → normalized to Combined BUS [647]
- Combined BUS: when chained → appears at last output [647]
- Touch Sensitivity: when set more CW → easier sliding between stages [647]
- Touch Sensitivity: when set more CCW → more Press control [647]
- Digit Trimmer: when set more CW → more sensitive to fingers [647]
- Digit Trimmer: when being adjusted → module power must be OFF [647]
- Close 4 Master: when single unit, no BRAINS → all closed [647]
- Close 4 Master: when 3-4 units chained → open except master [647]
- BRAINS: when jumper set 1PP/2PP → matches Pressure Points count [647]
- Stages: when BRAINS attached → selectable by clock inputs [647]

## Sources

- [647] Make Noise Pressure Points Manual (rev. 2025-07-16) (manual): https://www.makenoisemusic.com/wp-content/uploads/2024/03/PressurePointsManual.pdf
- [648] Make Noise Pressure Points product page (product_page): https://www.makenoisemusic.com/modules/pressure-points/

Full record as JSON: https://eurorackref.com/make-noise/pressure-points.json
