# Multimod (Make Noise)

Canonical page: https://eurorackref.com/make-noise/multimod/

- id: `make-noise/multimod`
- width: 10 HP; depth: 39 mm
- power: +12 V 195 mA, −12 V 10 mA, +5 V ? mA
- status: current
- functions: Multiple / Buffered Mult, LFO, Random / Sample & Hold CV, Phase-offset outputs, Chaotic / Complex Modulation, Freeze / Hold, CV Recorder / Gesture Looper, Tempo / Clock Sync, Master Clock, Clock Divider / Multiplier

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Signal IN | cv | signal to copy | -10 to 10 V | bipolar | not stated | 631 |
| Time CV IN | cv | Time modulation | -10 to 10 V | unknown | — | 631 |
| Phase CV IN | cv | Phase modulation | -10 to 10 V | bipolar | — | 631 |
| Spread CV IN | cv | Spread modulation | -10 to 10 V | bipolar | — | 631 |
| HOLD IN | gate | momentary Hold | -10 to 10 V | unknown | — | 631 |
| Reset IN | gate, trigger | re-aligns channel phase | -10 to 10 V | unknown | — | 631 |
| TEMPO In | clock | tempo grid clock | -10 to 10 V | unknown | — | 631 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| CLK Out | clock | write-speed clock | -10 to 10 V | unknown | clock | 631 |
| Channel Index OUT | cv | loudest channel index | 1 to 8 V | unipolar | copy engine | 631 |
| Channel Output 1 | cv | copy 1 | -10 to 10 V | bipolar | copy engine, internal LFO | 631 |
| Channel Output 2 | cv | copy 2 | -10 to 10 V | bipolar | copy engine, internal LFO | 631 |
| Channel Output 3 | cv | copy 3 | -10 to 10 V | bipolar | copy engine, internal LFO | 631 |
| Channel Output 4 | cv | copy 4 | -10 to 10 V | bipolar | copy engine, internal LFO | 631 |
| Channel Output 5 | cv | copy 5 | -10 to 10 V | bipolar | copy engine, internal LFO | 631 |
| Channel Output 6 | cv | copy 6 | -10 to 10 V | bipolar | copy engine, internal LFO | 631 |
| Channel Output 7 | cv | copy 7 | -10 to 10 V | bipolar | copy engine, internal LFO | 631 |
| Channel Output 8 | cv | copy 8 | -10 to 10 V | bipolar | copy engine, internal LFO | 631 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Time Panel Control | knob | global write/read speed | — | copy engine, internal LFO, clock, CLK Out | 631 |
| Phase Panel Control | knob | channel phase spacing | — | copy engine, Channel Output 1, Channel Output 2, Channel Output 3, Channel Output 4, Channel Output 5, Channel Output 6, Channel Output 7, Channel Output 8 | 631 |
| Spread Panel Control | knob | per-channel speed spread | — | copy engine, Channel Output 1, Channel Output 2, Channel Output 3, Channel Output 4, Channel Output 5, Channel Output 6, Channel Output 7, Channel Output 8 | 631 |
| Spread CV Attenuvertor | knob | Spread CV attenuverter | — | Spread CV IN | 631 |
| Shape Button | button | selects read shape | — | copy engine, internal LFO | 631 |
| HOLD Button | button | toggles Hold | — | copy engine | 631 |
| Reset Button | button | re-aligns channel phase | — | copy engine, internal LFO | 631 |

## Modes

- LFO mode [631]
- Hold (HOLD Button = on) [631]
- Tempo grid [631]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Time | tempo subdivision range | 1 to 32 division | TEMPO patched | 631 |
| Spread | panel speed range | 0.125 to 8 ratio | — | 631 |
| Spread | max speed range with CV | 0.041666666666666664 to 24 ratio | — | 631 |
| Spread | soft guard rails | -5 to 5 V | — | 631 |
| Phase | soft guard rails | 0 to 5 V | — | 631 |
| Phase | Ch1-Ch8 offset at full CW | 180 degrees | — | 631 |
| Phase | max offset with CV | 360 degrees | — | 631 |
| Channel Index | voltage per channel | 1 V | — | 631 |
| I/O | range | 20 Vpp | — | 632 |
| Signal IN | range | 20 Vpp | — | 631 |
| Multimod | width | 10 hp | — | 632 |
| Multimod | max depth | 39 mm | — | 632 |
| Multimod | +12V current | 195 mA | — | 632 |
| Multimod | -12V current | 10 mA | — | 632 |

## Behavior

- Signal IN: when unpatched → internal LFO used (LFO mode) [631]
- Shape: when LFO mode → sets LFO waveform (LFO mode) [631]
- Spread/Phase: when Spread 12:00, Phase min → digital mult of input [631]
- Time/Phase: when modulated aggressively → waveform discontinuities [631]
- Phase CV IN: when unpatched → pot sets Phase offset [631]
- Phase CV IN: when patched → pot becomes attenuator [631]
- Phase CV: when above +5V → phase keeps incrementing [631]
- Phase CV: when at +10V → all channels meet [631]
- Phase CV: when below 0V → reverse channel order [631]
- Spread CV: when beyond ±5V → advances to /24 or x24 [631]
- Spread: when changed → phase shifts; Reset re-aligns [631]
- Spread: when not at 12:00 → channels drift out of phase [631]
- Hold: when engaged → loops current copies [631]
- Hold: when engaged → sets Reset point [631]
- Hold: when LFO mode → track and hold LFO (LFO mode) [631]
- HOLD IN: when signal above 2V → Hold engaged, momentary [631]
- Reset: when button or >2V edge → channels return to position [631]
- Reset: when LFO mode → LFO restarts waveshape (LFO mode) [631]
- TEMPO In: when patched → Time/Phase/Spread quantized to grid (Tempo grid) [631]
- Channel Index OUT: when TEMPO patched → updates on tempo clock (Tempo grid) [631]
- Spread range: when TEMPO patched → depends on clock and Time (Tempo grid) [631]
- Hold: when TEMPO patched → loop times conform to grid (Tempo grid) [631]
- CLK Out: when TEMPO unpatched → clock at Time write speed [631]
- CLK Out: when TEMPO patched → subdivision of external clock (Tempo grid) [631]
- Shape Square: when LFO mode → square wave generated (LFO mode) [631]
- Shape Stepped Random: when LFO mode → stepped random per channel (LFO mode) [631]
- Shape Ramplets: when LFO mode → smooth random per channel (LFO mode) [631]

## Sources

- [631] Make Noise Multimod Manual (manual): https://www.makenoisemusic.com/wp-content/uploads/2025/02/multimod-manual.pdf
- [632] Make Noise Multimod product page (product_page): https://www.makenoisemusic.com/modules/multimod/

Full record as JSON: https://eurorackref.com/make-noise/multimod.json
