# modDemix (Make Noise)

Canonical page: https://eurorackref.com/make-noise/moddemix/

- id: `make-noise/moddemix`
- width: 6 HP; depth: 32 mm
- power: +12 V 30 mA, −12 V 30 mA, +5 V ? mA
- status: current
- functions: Ring Modulator, VCA, Mixer, Voltage Math / Precision Adder

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Signal 1 IN | audio, cv | signal to process | not stated | unknown | — | 1189 |
| Carrier/CV 1 IN | cv, audio | amplitude & phase control | not stated | bipolar | +5V | 1189 |
| AUX IN | audio, cv | summing stage chain input | not stated | unknown | — | 1189 |
| Signal 2 IN | audio, cv | signal to process | not stated | unknown | Signal 1 OUT | 1189 |
| Carrier/CV 2 IN | cv, audio | amplitude & phase control | not stated | bipolar | +5V | 1189 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Signal 1 OUT | audio, cv | Channel 1 output | not stated | unknown | Channel 1 | 1189 |
| Signal 2 OUT | audio, cv | Channel 2 output | not stated | unknown | Channel 2 | 1189 |
| SUM OUT | audio, cv | mix of outputs | not stated | unknown | SUMming stage | 1189 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Carrier/CV 1 Strength | knob | carrier attenuator / level | 0 to 5 V | Carrier/CV 1 IN, Channel 1 | 1189 |
| Carrier/CV 2 Strength | knob | carrier attenuator / level | 0 to 5 V | Carrier/CV 2 IN, Channel 2 | 1189 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 6 HP | — | 1190 |
| module | depth | 32 mm | — | 1190 |
| module | +12V current | 30 mA | — | 1190 |
| module | -12V current | 30 mA | — | 1190 |
| Carrier/CV Strength | range | 0 to 5 V | — | 1189 |
| Carrier/CV IN | level for unity output | 5 V | — | 1189 |

## Behavior

- Carrier/CV IN: when unpatched → normalled to +5V [1189]
- Carrier/CV Strength: when Carrier/CV IN unpatched → unipolar manual level control [1189]
- Carrier/CV Strength: when Carrier/CV IN patched → attenuates carrier strength [1189]
- Signal 2 IN: when unpatched → normalled to Signal 1 OUT [1189]
- Channel: when carrier changes phase → output phase flips [1189]
- Channel: when Carrier/CV near zero volts → turns off [1189]
- Channel: when +3V signal, +5V carrier → +3V output [1189]
- Channel: when +3V signal, -5V carrier → -3V output [1189]
- Carrier/CV Strength: when ring modulation → alters timbre and amplitude [1189]
- Carrier/CV Strength: when most other uses → sets output amplitude [1189]
- Channel: when unipolar audio-rate carrier → AM, carrier not suppressed [1189]
- Channel: when bipolar audio-rate carrier → balanced (ring) modulation [1189]

## Sources

- [1189] make-noise modDemix manual (manual): https://www.makenoise-manuals.com/moddemix/moddemix-manual.pdf
- [1190] make-noise modDemix product page (product_page): https://www.makenoisemusic.com/modules/moddemix/

Full record as JSON: https://eurorackref.com/make-noise/moddemix.json
