# Function (Make Noise)

Canonical page: https://eurorackref.com/make-noise/function/

- id: `make-noise/function`
- width: 8 HP; depth: 32 mm
- power: +12 V 30 mA, −12 V 20 mA, +5 V ? mA
- status: current
- functions: Function Generator, ADSR Envelope, Looping / Cycling Envelope, LFO, End-of-Cycle / End-of-Rise Output, Slew Limiter, Random / Sample & Hold CV, Master Clock, Gate / Trigger Utility, Clock Divider / Multiplier

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Signal Input | cv, gate, audio | direct coupled signal input | not stated | not stated | — | 687 |
| Trigger Input | trigger, gate | triggers function | not stated | not stated | — | 687 |
| Rise CV Input | cv | Rise time CV | not stated | bipolar | — | 687 |
| Fall CV Input | cv | Fall time CV | not stated | bipolar | — | 687 |
| Both CV Input | cv | total time CV | not stated | bipolar | — | 687 |
| Hang Input | gate | stops circuit while high | not stated | not stated | — | 687 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| End Of Rise Output | gate | end of rise gate | 0 to 10 V | unipolar | FUNCTION circuit | 687 |
| End Of Cycle Output | gate | end of cycle gate | 0 to 10 V | unipolar | FUNCTION circuit | 687 |
| Non-Inverted Signal Output | cv | non-inverted function | 0 to 8 V | unipolar | FUNCTION circuit | 687 |
| Inverted Signal Output | cv | inverted function | not stated | not stated | FUNCTION circuit | 687 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Rise | knob | rise time | — | FUNCTION circuit | 687 |
| Fall | knob | fall time | — | FUNCTION circuit | 687 |
| Vari-Response | knob | response curve | — | FUNCTION circuit | 687 |
| Cycle Button | button | self-cycle on/off | — | FUNCTION circuit | 687 |

## Modes

- Cycle (Cycle Button = on) [687]
- Triggered (Cycle Button = off) [687]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| function | cycle time | 2 to 1500000 ms | 2ms to 25 minutes | 688 |
| envelope | level | 0 to 8 V | Trigger Input or Cycling | 687 |
| module | width | 8 HP | — | 687 |
| module | max depth | 32 mm | — | 688 |
| power | +12V current | 30 mA | — | 687 |
| power | -12V current | 20 mA | — | 687 |

## Behavior

- Trigger Input: when gate or pulse arrives → triggers regardless of Signal Input [687]
- transient function: when trigger during falling portion → re-triggers [687]
- transient function: when trigger during rising portion → no reset [687]
- Signal Input gate: when gate high → rises then sustains gate level [687]
- Signal Input gate: when gate ends → falls to 0V [687]
- Hang Input: when gate high → function stops in place [687]
- Hang Input: when gate low → function resumes [687]
- Both CV Input: when positive CV → decreases total time [687]
- Both CV Input: when negative CV → increases total time [687]
- Rise CV Input: when positive CV → increases Rise time [687]
- Rise CV Input: when negative CV → decreases Rise time [687]
- Fall CV Input: when positive CV → increases Fall time [687]
- Fall CV Input: when negative CV → decreases Fall time [687]
- Rise/Fall controls: when clockwise rotation → increases time [687]
- signal outputs: when not cycling → follow input amplitude [687]
- signal outputs: when cycling → 0-8V function (Cycle) [687]
- Vari-Response: when more logarithmic → longer cycles [687]
- Vari-Response: when adjusted → affects Rise and Fall times [687]
- Rise and Fall: when set fully CCW → up to audio rate (Cycle) [687]

## Sources

- [687] Make Noise Function Manual (manual): https://www.makenoisemusic.com/wp-content/uploads/2024/03/FUNCTIONmanual.pdf
- [688] Make Noise Function product page (product_page): https://www.makenoisemusic.com/modules/function/

Full record as JSON: https://eurorackref.com/make-noise/function.json
