# SVF-201 Analog State Variable Filter (KOMA Elektronik)

Canonical page: https://eurorackref.com/koma-elektronik/svf-201/

- id: `koma-elektronik/svf-201`
- width: 12 HP; depth: 40 mm
- power: +12 V 80 mA, −12 V 11 mA, +5 V ? mA
- status: current
- functions: Lowpass Filter, Highpass Filter, Bandpass / Notch Filter, Multimode Filter, Simultaneous Multimode Outputs, Self-Oscillating Filter, Vactrol

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| AUDIO IN | audio | filter audio input | not stated | unknown | — | 1568 |
| Cutoff CV | cv | cutoff modulation | unknown | bipolar | — | 1568 |
| Resonance CV | cv | resonance (Q) modulation | unknown | bipolar | — | 1568 |
| Select CV | cv | Mix Out type select | 0 to 5 V | unipolar | SELECT | 1568 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| LP OUT | audio | low pass output | not stated | unknown | state variable filter | 1568 |
| BP OUT | audio | band pass output | not stated | unknown | state variable filter | 1568 |
| HP OUT | audio | high pass output | not stated | unknown | state variable filter | 1568 |
| Mix Out | audio | swept LP/BP/HP mix | not stated | unknown | Mix Out section, state variable filter | 1568 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Cutoff | knob | cutoff frequency | — | state variable filter, LP OUT, BP OUT, HP OUT, Mix Out | 1568 |
| Input Attenuator / Gain | knob | input level | ≤ 6 dB | AUDIO IN, input stage | 1568 |
| RESONANCE | knob | filter Q | — | state variable filter, LP OUT, BP OUT, HP OUT, Mix Out | 1568 |
| SELECT | knob | filter type sweep | 0 to 5 V | Mix Out section, Mix Out | 1568 |
| +5V rail choice | jumper | +5V source | — | module | 1568 |
| LED Corona | jumper | Cutoff knob backlight | — | Cutoff | 1568 |
| trimmers | other | factory filter calibration | — | state variable filter | 1568 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 12 HP | — | 1568 |
| module | depth | 40 mm | — | 1568 |
| module | +12V current | 80 mA | — | 1568 |
| module | -12V current | 11 mA | — | 1568 |
| module | shipping weight | 250 g | — | 1568 |
| Input Attenuator / Gain | max boost | 6 dB | full CW | 1568 |
| Cutoff CV | processed range | 5 Vpp | — | 1568 |
| Resonance CV | processed range | 5 Vpp | — | 1568 |
| Select CV | input range | 0 to 5 V | — | 1568 |
| Mix Out | low pass region | 0.25 to 2.25 V | Select CV voltage | 1568 |
| Mix Out | pure band pass region | 2.25 to 2.75 V | Select CV voltage | 1568 |
| Mix Out | high pass region | 2.75 to 4.75 V | Select CV voltage | 1568 |
| front panel | thickness | 2 mm | — | 1568 |
| module | audio outputs | 4 count | — | 1568 |

## Behavior

- Input Attenuator / Gain: when full CCW → no signal into filter [1568]
- Input Attenuator / Gain: when around 9 o'clock → unity gain [1568]
- Input Attenuator / Gain: when full CW → about +6dB boost [1568]
- AUDIO IN: when input overdriven → distorted, rich sound [1568]
- Cutoff: when full CCW → lowest cutoff [1568]
- Cutoff: when full CW → highest cutoff [1568]
- Cutoff: when turned → changes all outputs simultaneously [1568]
- RESONANCE: when full CCW → no gain at cutoff [1568]
- RESONANCE: when at or near maximum → filter self-oscillates [1568]
- Cutoff CV: when CV exceeds 5Vpp → attenuate for full range [1568]
- Resonance CV: when CV exceeds 5Vpp → attenuate for full range [1568]
- Select CV: when unpatched → SELECT knob supplies 0-5V [1568]
- Mix Out: when select 0.25-2.25V → low pass [1568]
- Mix Out: when select 2.25-2.75V → pure band pass [1568]
- Mix Out: when select 2.75-4.75V → high pass [1568]
- Mix Out: when taken instead of single outputs → more overdrive / distortion [1568]
- HP OUT: when very low cutoff, high resonance → sub bass added around Q [1568]
- LED Corona: when jumper removed → Cutoff backlight off [1568]
- +5V rail choice: when set to Bus → uses bus board +5V [1568]
- +5V rail choice: when any jumper position → +5V rails never connected [1568]
- module: when powered correctly → Cutoff knob light on [1568]

## Sources

- [756] KOMA Elektronik SVF-201 product page (product_page): https://koma-elektronik.com/?product=svf-201-analog-state-variable-filter-with-built-in-sequencer
- [1568] KOMA Elektronik SVF-201 user manual (manual): https://koma-elektronik.com/new/wp-content/uploads/2015/08/SVF-201_A2.pdf

Full record as JSON: https://eurorackref.com/koma-elektronik/svf-201.json
