# Grainity (Klavis)

Canonical page: https://eurorackref.com/klavis/grainity/

- id: `klavis/grainity`
- width: 10 HP; depth: 21 mm
- power: +12 V 101 mA, −12 V 59 mA, +5 V 0 mA
- status: current
- functions: Multimode Filter, Lowpass Filter, Highpass Filter, Bandpass / Notch Filter, Self-Oscillating Filter, 1V/Oct Pitch Tracking, Crossfader

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Input | audio | main audio input | -5 to 5 V | bipolar | — | 226 |
| FM | cv | frequency CV | -5 to 5 V | bipolar | — | 226 |
| V/Oct | pitch, cv | cutoff V/Oct | -5 to 5 V | bipolar | — | 226 |
| Q | cv | resonance CV | 0 to 5 V | unipolar | — | 226 |
| Mix | cv | mix CV | -5 to 5 V | bipolar | — | 226 |
| Detect | audio, trigger, gate, clock | cycling detect input | unknown | unknown | — | 226 |
| Struct | cv | structure select CV | -5 to 5 V | bipolar | — | 226 |
| Div | cv | division CV | -5 to 5 V | bipolar | — | 226 |
| Φ/Frq | cv | phase/frequency CV | -5 to 5 V | bipolar | — | 226 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| M.VCF | audio | multimode VCF output | not stated | unknown | Multimode VCF | 226 |
| G.VCF | audio | granular VCF output | not stated | unknown | Granular VCF | 226 |
| Mix | audio | filters mix output | not stated | unknown | Mix | 226 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| F | fader | cutoff frequency | — | Granular VCF, Multimode VCF | 226 |
| Q | fader | resonance | — | Granular VCF, Multimode VCF | 226 |
| FM | knob | FM CV gain | — | FM | 226 |
| Q (knob) | knob | Q CV gain | — | Q | 226 |
| Mix | knob | M.VCF / G.VCF balance | — | Mix | 226 |
| Type | button | filter type, inversion | — | Multimode VCF, Mix | 226 |
| Structure | knob | structure selection encoder | — | Structures | 226 |
| Div | knob | granular division | — | Division | 226 |
| Track | button | Track/Phase mode | — | Φ/Frq, Pitch detection and tuning | 226 |
| Φ/Frq | knob | phase or tracking frequency | — | Granular VCF | 226 |

## Modes

- Phase (Track = LED off) [226]
- Track (Track = LED on) [226]
- LP2 (Type = LP2) [226]
- LP4 (Type = LP4) [226]
- HP (Type = HP) [226]
- BP (Type = BP) [226]
- BR (Type = BR) [226]
- IN (Type = IN) [226]
- phase inversion (Type = long press) [226]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| LP2 | slope | 12 dB/oct | — | 226 |
| LP4 | slope | 24 dB/oct | — | 226 |
| HP | slope | 24 dB/oct | — | 226 |
| BP | slope | 12 dB/oct | — | 226 |
| BR | slope | 12 dB/oct | — | 226 |
| Track | tuning ratio | 1 to 2.01 ratio | Track mode | 226 |
| Frq knob | tuning range | 0 to 1 octaves | Track mode | 226 |
| structures | loop length | 2 to 8 steps | — | 226 |
| multimode VCF | filter types | 6 count | — | 226 |
| V/Oct | tracking | 2 F/V | — | 226 |
| Detect | minimum level | 300 mV | — | 226 |
| outputs | gain | 1 x | open filter, no resonance | 226 |
| inputs and outputs | withstand range | -12 to 12 V | — | 226 |
| CV inputs | count | 7 count | — | 226 |
| module | width | 10 HP | — | 226 |
| module | depth | 21 mm | — | 226 |
| +12V | current draw | 101 mA | — | 226 |
| -12V | current draw | 59 mA | — | 226 |
| +5V | current draw | 0 mA | — | 226 |

## Behavior

- Detect: when patched → supersedes Input for cycling [226]
- Granular VCF: when zero-crossing detected → steps to next structure step [226]
- Div: when set → repeats each step N times [226]
- Division: when applied → after detect, phase, track [226]
- Φ/Frq: when Track off, pot minimum → cycle at zero-crossing (Phase) [226]
- Φ/Frq: when Track off, pot increased → delays phase within cycle (Phase) [226]
- phase delay: when input frequency changes → adjusts automatically (Phase) [226]
- Track: when unreliable frequency detected → cycling unpredictable (Track) [226]
- phase inversion: when sections not mixed → no audible effect [226]
- Type setting: when changed → no granular interaction [226]
- Mix knob: when full left → M.VCF only [226]
- Mix knob: when full right → G.VCF only [226]
- FM knob: when middle position → zero modulation [226]
- IN type: when selected → M.VCF passes unaltered input [226]

## Sources

- [226] Klavis Grainity User Manual rev. A (manual): https://www.klavis.com/images/Klavis_-_Grainity_User_Manual.pdf
- [227] Klavis Grainity product page (product_page): https://www.klavis.com/all-products/grainity

Full record as JSON: https://eurorackref.com/klavis/grainity.json
