# Walk 4 (Joranalogue Audio Design)

Canonical page: https://eurorackref.com/joranalogue/walk-4/

- id: `joranalogue/walk-4`
- width: 10 HP; depth: 30 mm
- power: +12 V 105 mA, −12 V 85 mA, +5 V ? mA
- status: current
- functions: Master Clock, 1V/Oct Pitch Tracking, Analog VCO, Random / Sample & Hold CV, Noise Source, Voltage Math / Precision Adder

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| RATE CV | cv, pitch | clock frequency CV | not stated | not stated | — | 1338 |
| TREND CV | cv | trend parameter CV | not stated | bipolar | — | 1338 |
| VOLATILITY CV | cv | volatility parameter CV | not stated | not stated | — | 1338 |
| CONSTRAIN CV | cv | constrain parameter CV | not stated | not stated | — | 1338 |
| RESET | trigger, gate | external reset | not stated | not stated | — | 1338 |
| ADD | cv, pitch | added to all outputs | not stated | not stated | — | 1338 |
| VALUE 1 | cv | accumulator value input | not stated | bipolar | — | 1338 |
| VALUE 2 | cv | accumulator value input | not stated | bipolar | — | 1338 |
| VALUE 3 | cv | accumulator value input | not stated | bipolar | — | 1338 |
| VALUE 4 | cv | accumulator value input | not stated | bipolar | — | 1338 |
| TRIGGER 1 | trigger, clock | accumulation trigger | not stated | not stated | CLOCK | 1338 |
| TRIGGER 2 | trigger, clock | accumulation trigger | not stated | not stated | TRIGGER 1 | 1338 |
| TRIGGER 3 | trigger, clock | accumulation trigger | not stated | not stated | TRIGGER 2 | 1338 |
| TRIGGER 4 | trigger, clock | accumulation trigger | not stated | not stated | TRIGGER 3 | 1338 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| CLOCK | clock, trigger | internal clock output | ≤ 5 V | unipolar | Clock generator | 1338 |
| ACCUMULATOR 1 | cv, audio | accumulator output | not stated | bipolar | Accumulator 1, ADD | 1338 |
| ACCUMULATOR 2 | cv, audio | accumulator output | not stated | bipolar | Accumulator 2, ADD | 1338 |
| ACCUMULATOR 3 | cv, audio | accumulator output | not stated | bipolar | Accumulator 3, ADD | 1338 |
| ACCUMULATOR 4 | cv, audio | accumulator output | not stated | bipolar | Accumulator 4, ADD | 1338 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| LOW/AUDIO | switch | clock frequency range | — | Clock generator, RATE, RATE CV | 1338 |
| RATE | knob | clock frequency | — | Clock generator | 1338 |
| TREND | knob | static accumulator offset | 0 to 5 V | Accumulator 1, Accumulator 2, Accumulator 3, Accumulator 4 | 1338 |
| VOLATILITY | knob | white noise level | — | White noise generators, Accumulator 1, Accumulator 2, Accumulator 3, Accumulator 4 | 1338 |
| CONSTRAIN | knob | feedback threshold/strength | — | Constrain circuit, Accumulator 1, Accumulator 2, Accumulator 3, Accumulator 4 | 1338 |
| AUTO RESET | switch | saturation behaviour | — | Auto reset system, Accumulator 1, Accumulator 2, Accumulator 3, Accumulator 4 | 1338 |
| GAIN 1 | other | accumulator gain calibration | — | Accumulator 1 | 1338 |
| GAIN 2 | other | accumulator gain calibration | — | Accumulator 2 | 1338 |
| GAIN 3 | other | accumulator gain calibration | — | Accumulator 3 | 1338 |
| GAIN 4 | other | accumulator gain calibration | — | Accumulator 4 | 1338 |
| VOLT PER OCTAVE | other | clock pitch tracking calibration | — | Clock generator, RATE CV | 1338 |

## Modes

- Low (LOW/AUDIO = LOW) [1338]
- Audio (LOW/AUDIO = AUDIO) [1338]
- Auto reset (AUTO RESET = enabled) [1338]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 10 HP | — | 1338 |
| module | depth | 30 mm | including power cable | 1338 |
| module | +12V current | 105 mA | — | 1338 |
| module | -12V current | 85 mA | — | 1338 |
| Clock generator | frequency range | 22 to 22000 Hz | Audio mode | 1338 |
| Clock generator | frequency range | 0.0055 to 180 Hz | Low mode | 1338 |
| Clock generator | slowest period | 3 min | Low mode | 1338 |
| Clock generator | frequency at centre | 1 Hz | Low mode, RATE centred | 1338 |
| RATE CV | CV sensitivity | 1 V/oct | Audio mode | 1338 |
| RATE CV | CV sensitivity | 0.6 V/oct | Low mode, approximate | 1338 |
| TREND | offset range | 0 to 5 V | — | 1338 |
| VOLATILITY CV | nominal maximum CV | 5 V | VOLATILITY knob at 0 | 1338 |
| Constrain circuit | constrain onset | 10 V | CONSTRAIN fully up | 1338 |
| accumulators | saturation | 12 V | auto reset disabled, approximate | 1338 |
| accumulators | reset threshold | 10 V | auto reset enabled, ± | 1338 |
| CLOCK | pulse amplitude | 5 V | — | 1338 |
| CLOCK | pulse width | 1 ms | below 500 Hz | 1338 |
| CLOCK | pulse narrowing onset | 500 Hz | — | 1338 |
| TRIGGER/RESET inputs | low logic threshold | 2 V | — | 1338 |
| TRIGGER/RESET inputs | high logic threshold | 3 V | — | 1338 |
| all inputs | input impedance | 100 kΩ | — | 1338 |
| CLOCK | output impedance | 1 kΩ | — | 1338 |
| accumulator outputs | output impedance | 0 Ω | impedance compensated | 1338 |
| module | height | 128.5 mm | — | 1338 |
| module | outer width | 50.5 mm | — | 1338 |
| module | outer depth | 43 mm | — | 1338 |
| module | mass | 150 g | — | 1338 |
| module | accumulator count | 4 channels | — | 1338 |

## Behavior

- TRIGGER 1: when unpatched → internal clock triggers [1338]
- TRIGGER 2-4: when unpatched → uses left neighbour's trigger [1338]
- accumulator: when trigger rising edge → adds summed input voltage [1338]
- RESET: when rising edge → accumulators and oscillator to 0V [1338]
- AUTO RESET: when disabled → saturates near ±12 V [1338]
- accumulator: when saturated, auto reset off → needs opposite input or reset [1338]
- AUTO RESET: when enabled, value exceeds ±10 V → instant reset to 0 V [1338]
- ADD: when voltage applied → added continuously to outputs [1338]
- ADD: when any time → independent of triggers, auto reset [1338]
- TREND CV: when negative voltage → accumulators trend downwards [1338]
- VOLATILITY: when fully anti-clockwise → noise disabled [1338]
- VOLATILITY CV: when above +5 V → volatility beyond nominal maximum [1338]
- CONSTRAIN: when increased → threshold rises, feedback decreases [1338]
- CONSTRAIN: when turned down → triggers may reduce voltage [1338]
- CONSTRAIN: when fully clockwise → acts only beyond ±10 V [1338]
- CONSTRAIN CV: when external modulation → range beyond knob ends [1338]
- accumulator: when TREND, VOLATILITY min, CONSTRAIN max → only VALUE input accumulates [1338]
- accumulator: when input sum negative → output decreases, may go negative [1338]
- accumulator: when triggered at audio rate → may drift from offsets [1338]
- CLOCK: when frequency above 500 Hz → pulse narrows toward square [1338]
- LOW/AUDIO: when LOW → RATE CV ~0.6 V/oct (Low) [1338]
- LOW/AUDIO: when AUDIO → RATE CV 1 V/oct (Audio) [1338]

## Sources

- [1338] joranalogue Walk 4 manual (manual): https://joranalogue.com/walk-4/manual
- [1339] joranalogue Walk 4 product page (product_page): https://joranalogue.com/collections/all/products/walk-4

Full record as JSON: https://eurorackref.com/joranalogue/walk-4.json
