# Orbit 3 (Joranalogue Audio Design)

Canonical page: https://eurorackref.com/joranalogue/orbit-3/

- id: `joranalogue/orbit-3`
- width: 10 HP; depth: 30 mm
- power: +12 V 70 mA, −12 V 65 mA, +5 V ? mA
- status: current
- functions: Chaotic / Complex Modulation, LFO, Analog VCO, 1V/Oct Pitch Tracking, Exponential FM, Oscillator Sync, Simultaneous Waveform Outputs, Phase-offset outputs

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Frequency modulation input | pitch, cv, audio | exponential frequency modulation | not stated | unknown | — | 723 |
| Distribution modulation input | cv | distribution modulation | ≤ 5 V | unknown | — | 723 |
| Reset input | gate, trigger, audio | core reset / sync | not stated | unknown | — | 723 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Chaos output X | cv, audio | X axis output | not stated | bipolar | Chaos oscillator core | 723 |
| Chaos output −X | cv, audio | inverted X axis output | not stated | bipolar | Chaos oscillator core | 723 |
| Chaos output Y | cv, audio | Y axis output | not stated | bipolar | Chaos oscillator core | 723 |
| Chaos output −Y | cv, audio | inverted Y axis output | not stated | bipolar | Chaos oscillator core | 723 |
| Chaos output Z | cv, audio | Z axis output | not stated | bipolar | Chaos oscillator core | 723 |
| Chaos output −Z | cv, audio | inverted Z axis output | not stated | bipolar | Chaos oscillator core | 723 |
| Equilibrium point output | gate, audio | current scroll gate | 0 to 5 V | unipolar | Chaos oscillator core | 723 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Frequency range switch | switch | LFO / audio range | — | Chaos oscillator core | 723 |
| Frequency knob | knob | oscillation frequency | — | Chaos oscillator core | 723 |
| Frequency modulation knob | knob | FM polariser | -1 to 1 V/oct | Frequency modulation input | 723 |
| Distribution knob | knob | orbit widening | — | Chaos oscillator core | 723 |
| Distribution modulation knob | knob | distribution polariser | — | Distribution modulation input | 723 |
| Tame/wild switch | switch | chaos behaviour | — | Chaos oscillator core | 723 |
| Equilibrium point knob 1 | knob | equilibrium point position | — | Chaos oscillator core | 723 |
| Equilibrium point knob 2 | knob | equilibrium point position | — | Chaos oscillator core | 723 |
| Volt per octave trimmer | knob | pitch tracking calibration | — | Frequency modulation input | 723 |

## Modes

- Low frequency (Frequency range switch = low) [723]
- Audio frequency (Frequency range switch = audio) [723]
- Tame (Tame/wild switch = tame) [723]
- Wild (Tame/wild switch = wild) [723]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Frequency | range | 22 to 22000 Hz | audio frequency mode | 723 |
| Frequency | range | 0.0024 to 180 Hz | low frequency mode | 723 |
| Frequency | knob centred | 1 Hz | low frequency mode | 723 |
| Frequency | slowest period | 7 min | low frequency mode | 723 |
| FM sensitivity | maximum | 1 V/oct | audio mode | 723 |
| FM sensitivity | approximate | 0.6 V/oct | low mode | 723 |
| Distribution modulation | maximum distribution | 5 V | — | 723 |
| Reset input | low threshold | 2 V | — | 723 |
| Reset input | high threshold | 3 V | — | 723 |
| Chaos outputs | amplitude | 3 to 12 Vpp | — | 723 |
| Chaos outputs | stage phase shift | 60 degrees | — | 723 |
| Equilibrium point output | levels | 0 to 5 V | — | 723 |
| Calibration | warm-up | 20 min | — | 723 |
| Module | width | 10 HP | — | 723 |
| Module | current +12 V | 70 mA | — | 723 |
| Module | current -12 V | 65 mA | — | 723 |
| Inputs | impedance | 100 kΩ | — | 723 |
| Analogue outputs | impedance | 0 Ω | — | 723 |
| Gate output | impedance | 1 kΩ | — | 723 |

## Behavior

- Reset: when rising edge → core instantly reset [723]
- Reset: when direction flips on reset → octave down effect [723]
- Equilibrium point output: when positive scroll orbited → +5 V [723]
- Equilibrium point output: when negative scroll orbited → 0 V [723]
- Equilibrium point knobs: when turned clockwise → point moves from 0 V [723]
- Equilibrium points: when set differently → asymmetric attractor [723]
- Distribution: when large → longer orbits around points [723]
- Output amplitude: when tame/wild, distribution, positions → varies 3–12 Vpp [723]
- Frequency modulation knob: when centred → zero modulation [723]
- FM sensitivity: when low mode → about 0.6 V/oct [723]

## Sources

- [723] Joranalogue Orbit 3 User Manual (manual): https://joranalogue.com/orbit-3/manual
- [724] Joranalogue Orbit 3 product page (product_page): https://joranalogue.com/products/orbit-3

Full record as JSON: https://eurorackref.com/joranalogue/orbit-3.json
