# Dim 2 (Joranalogue Audio Design)

Canonical page: https://eurorackref.com/joranalogue/dim-2/

- id: `joranalogue/dim-2`
- width: 4 HP; depth: 30 mm
- power: +12 V 150 mA, −12 V 5 mA, +5 V ? mA
- status: current

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| CV input A | cv | dimmer CV | 0 to 5 V | unipolar | — | 1326 |
| CV input B | cv | dimmer CV | 0 to 5 V | unipolar | CV input A | 1326 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| BNC lamp output A | — | lamp power | 0 to 12 V | not stated | dimmer A | 1326 |
| BNC lamp output B | — | lamp power | 0 to 12 V | not stated | dimmer B | 1326 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| dimmer knob A | knob | lamp brightness | 0 to 100 % | dimmer A, CV input A | 1326 |
| dimmer knob B | knob | lamp brightness | 0 to 100 % | dimmer B, CV input B | 1326 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 4 HP | — | 1326 |
| module | depth | 30 mm | inc. power cable | 1326 |
| module | +12V current | 150 mA | with included LED lamps | 1326 |
| module | -12V current | 5 mA | — | 1326 |
| module | +12V current max load | 1000 mA | at maximum load | 1326 |
| BNC lamp output | power | ≤ 6 W | — | 1326 |
| BNC lamp output | current | 500 mA | at 12 V | 1327 |
| BNC lamp output | voltage | 0 to 12 V | — | 1326 |
| dimmer | PWM frequency | 20 kHz | — | 1327 |
| dimmer | brightness | 0 to 100 % | — | 1326 |
| CV input | CV range | 0 to 5 V | knob at maximum | 1326 |
| module | outer height | 128.5 mm | — | 1326 |
| module | outer width | 20 mm | — | 1326 |
| module | outer depth | 43 mm | — | 1326 |
| module | mass | 55 g | — | 1326 |

## Behavior

- CV input B: when unpatched → receives CV from A [1326]
- dimmer knob: when CV input in use → becomes CV attenuator [1326]
- CV input: when knob at maximum → 0 to +5 V range [1326]
- non-dimmable LED lamp: when dimmer knob at 100% → works normally [1326]
- external 12V lamps: when connected → current drawn from +12V rail [1326]
- attached lamps: when prolonged high intensity → may become hot [1326]

## Sources

- [1326] joranalogue Dim 2 manual (manual): https://joranalogue.com/dim-2/manual
- [1327] joranalogue Dim 2 product page (product_page): https://joranalogue.com/collections/all/products/dim-2

Full record as JSON: https://eurorackref.com/joranalogue/dim-2.json
