# Delay 1 (Joranalogue Audio Design)

Canonical page: https://eurorackref.com/joranalogue/delay-1/

- id: `joranalogue/delay-1`
- width: 12 HP; depth: 43 mm
- power: +12 V 125 mA, −12 V 95 mA, +5 V ? mA
- status: current
- functions: Delay, 1V/Oct Pitch Tracking, Resonator / physical model, Gate / Trigger Utility, Stereo Inputs / Outputs

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Volt per octave TM | pitch, cv | 1V/oct delay time | not stated | not stated | — | 1121 |
| Time modulation | cv | exponential time modulation | not stated | not stated | — | 1121 |
| Blend modulation | cv | dry/wet modulation | ≤ 5 V | not stated | — | 1121 |
| Damping modulation | cv | damping filter modulation | not stated | not stated | — | 1121 |
| Signal input | audio | audio to process | not stated | not stated | — | 1121 |
| HF input | clock | external BBD clock | 0 to 5 V | not stated | — | 1121 |
| Pluck input | trigger | strike delay line | not stated | not stated | — | 1121 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| HF output | clock | buffered BBD clock | 0 to 5 V | unipolar | HF VCO, HF input | 1121 |
| Delay output | audio | fully wet signal | unknown | unknown | BBD delay line | 1121 |
| Positive blend output | audio | dry plus wet | unknown | unknown | Blend | 1121 |
| Negative blend output | audio | wet minus dry | unknown | unknown | Blend | 1121 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Coarse knob | knob | delay time | 1 to 50 ms | HF VCO | 1121 |
| Fine knob | knob | fine delay time | — | HF VCO | 1121 |
| Time modulation knob | knob | TM depth polariser | -1 to 1 V/oct | Time modulation | 1121 |
| Blend knob | knob | dry/wet ratio | 0 to 100 % wet | Blend | 1121 |
| Blend modulation knob | knob | blend CV depth | — | Blend modulation | 1121 |
| Feedback knob | knob | feedback amount | 0 to 100 % | Feedback path | 1121 |
| Polarity switch | switch | feedback polarity | — | Feedback path | 1121 |
| Damping knob | knob | feedback filter amount | 22 to 22000 Hz | Damping filter | 1121 |
| Response switch | switch | damping filter response | — | Damping filter | 1121 |
| Damping modulation knob | knob | damping CV polariser | -1 to 1 V/oct (approx.) | Damping modulation | 1121 |
| Volt per octave trimmer | other | V/oct calibration | — | HF VCO | 1121 |
| Feedback trimmer | other | maximum feedback calibration | — | Feedback path | 1121 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| BBD delay line | delay time | 1 to 50 ms | — | 1121 |
| Fine knob | range | 10 % of coarse | — | 1121 |
| Time modulation knob | depth | -1 to 1 V/oct | — | 1121 |
| Blend modulation | full wet CV | 5 V | — | 1121 |
| Feedback knob | feedback amount | 0 to 100 % | — | 1121 |
| Damping filter | corner frequency | 22 to 22000 Hz | — | 1121 |
| Damping modulation knob | depth | -1 to 1 V/oct | approximate | 1121 |
| HF VCO | clock frequency | ≥ 20000 Hz | internal | 1122 |
| HF input | recommended frequency | 20000 to 1000000 Hz | — | 1121 |
| HF input | recommended duty cycle | 50 % | — | 1121 |
| HF input | minimum swing | 0 to 5 V | — | 1121 |
| Pluck input | threshold | 3 V | — | 1121 |
| Volt per octave trimmer | calibration interval | 4 octaves | 0 V to +4 V | 1121 |
| module | width | 12 HP | — | 1121 |
| module | depth | 30 mm | — | 1121 |
| module | current +12V | 125 mA | — | 1121 |
| module | current -12V | 95 mA | — | 1121 |
| inputs | impedance | 100 kΩ | — | 1121 |
| analogue outputs | impedance | 0 Ω | — | 1121 |
| HF output | impedance | 50 Ω | — | 1121 |

## Behavior

- HF input: when cable plugged in → internal HF VCO disabled [1121]
- Coarse/fine knobs: when HF input patched → non-functional [1121]
- Time modulation inputs: when HF input patched → non-functional [1121]
- HF input: when below 20 kHz → clock whine audible [1121]
- HF input: when above 1 MHz → poor audio fidelity [1121]
- Volt per octave TM: when each additional volt → delay halves [1121]
- Blend knob: when centred → 1:1 dry/wet mix [1121]
- Polarity switch: when set to anti → feedback inverted [1121]
- Damping knob: when turned clockwise → more attenuation, either response [1121]
- Feedback path: when high feedback → audible saturation [1121]
- Pluck input: when rising edge above 3 V → strikes delay line [1121]
- Pluck sound: when pitch, decay, timbre → set by time, feedback, damping [1121]
- Delay output: when blend changed → unaffected [1121]

## Sources

- [1121] Joranalogue Delay 1 User Manual (manual): https://cdn.shopify.com/s/files/1/1594/2421/files/delay-1-user-manual.pdf
- [1122] Joranalogue Delay 1 product page (product_page): https://joranalogue.com/products/delay-1

Full record as JSON: https://eurorackref.com/joranalogue/delay-1.json
