# XY I/O 1U (Intellijel)

Canonical page: https://eurorackref.com/intellijel/xy-i-o-1u/

- id: `intellijel/xy-i-o-1u`
- width: 4 HP; depth: 24 mm
- power: +12 V 0 mA, −12 V 0 mA, +5 V 0 mA
- status: current

## Bidirectional jacks

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| X | audio | TRS link access | not stated | unknown | — | 1271 |
| Y | audio | TRS link access | not stated | unknown | — | 1271 |
| JP1 | audio | 3-pin LINK connector | not stated | unknown | — | 1271 |
| JP2 | audio | 3-pin LINK connector | not stated | unknown | — | 1271 |
| JP3 | audio | 3-pin LINK connector | not stated | unknown | — | 1271 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 4 HP | — | 1271 |
| module | depth | 24 mm | — | 1271 |
| module | +12V current | 0 mA | passive | 1271 |
| module | -12V current | 0 mA | passive | 1271 |
| module | +5V current | 0 mA | passive | 1271 |

## Behavior

- JP1: when linked to Mixup CHAIN IN → X TIP left, RING right [1271]
- JP1: when linked to Pedal I/O → X TIP send, RING return [1271]
- JP2: when linked to Pedal I/O → X send, Y return [1271]
- JP2: when linked to Mixup CHAIN IN → X left, Y right [1271]
- JP2: when linked to Switched Mult 1U → adds jack to X/Y busses [1271]
- JP3: when linked → as JP1, using Y [1271]
- 7U case link: when 1st gen Audio Jacks → not supported [1271]

## Sources

- [1271] intellijel XY I/O 1U manual (manual): https://intellijel.com/downloads/manuals/xy-i-o-1u_manual_2021.05.05.pdf
- [1272] intellijel XY I/O 1U product page (product_page): https://intellijel.com/shop/eurorack/1u/xy-i-o-1u/

Full record as JSON: https://eurorackref.com/intellijel/xy-i-o-1u.json
