# Tete (Intellijel)

Canonical page: https://eurorackref.com/intellijel/tete/

- id: `intellijel/tete`
- width: 8 HP; depth: 39 mm
- power: +12 V 120 mA, −12 V 6 mA, +5 V ? mA
- status: current
- functions: Step Sequencer, CV Recorder / Gesture Looper, Master Clock, Tempo / Clock Sync, Clock Divider / Multiplier, LFO, Euclidean rhythm, Unipolar/bipolar switch

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| CLK IN | clock | external clock | not stated | unknown | — | 1159 |
| TRIG IN | trigger, gate | assignable trigger input | not stated | unknown | — | 1159 |
| RESET IN | trigger, gate | assignable reset input | not stated | unknown | — | 1159 |
| X IN | cv | assignable CV input | -10 to 10 V | not stated | — | 1159 |
| Y IN | cv | assignable CV input | -10 to 10 V | not stated | — | 1159 |
| Z IN | cv | assignable CV input | -10 to 10 V | not stated | — | 1159 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| SYNC OUT | clock, gate, trigger | assignable sync output | ≤ 5 V | not stated | Clock | 1159 |
| A OUT | cv, clock, gate, trigger | assignable output | 0 to 5 V | not stated | Looper, Sequencer | 1159 |
| B OUT | trigger, cv, clock, gate | assignable output | ≤ 5 V | not stated | Looper, Sequencer | 1159 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| X Attenuverter | knob | X IN attenuverter | — | X IN | 1159 |
| Y Attenuverter | knob | Y IN attenuverter | — | Y IN | 1159 |
| Z Attenuverter | knob | Z IN attenuverter | — | Z IN | 1159 |
| SCREEN Encoder | knob | menu push encoder | — | Looper, Sequencer | 1159 |
| SETUP MODE | button | setup / mode select | — | — | 1159 |
| CV FILE | button | CV setup / file | — | — | 1159 |
| TEMPO | button | tempo / tap tempo | — | Clock | 1159 |
| LOOPY | button | Loopy on/off | — | Looper, Sequencer | 1159 |
| PLAY/PAUSE | button | play / pause | — | Looper, Sequencer | 1159 |
| RECORD | button | record / erase | — | Looper, Sequencer | 1159 |
| Seq Clock | menu_setting | sequencer clock div/mult | — | Sequencer | 1159 |
| Seq. Swing | menu_setting | sequencer swing | 50 to 78 % | Sequencer | 1159 |
| Euclidean Swing | menu_setting | euclidean pad swing | 50 to 78 % | Combo Mode | 1159 |

## Modes

- Combo [1159]
- Notes [1159]
- Voltages [1159]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Sequencer | max steps | 256 steps | — | 1159 |
| Looper | optimized recording length | 5 min | — | 1159 |
| CV inputs | readable range | -10 to 10 V | — | 1159 |
| CV inputs | full-sweep range | -5 to 5 V | — | 1159 |
| A OUT | Loop Position range | 0 to 5 V | — | 1159 |
| Tap tempo | range | 20 to 480 BPM | — | 1159 |
| CLK IN | maximum external clock | 2400 BPM | — | 1159 |
| Seq Clock | division | 2 to 4 x | divide /2 to /4 | 1159 |
| Seq Clock | multiplication | 1 to 4 x | — | 1159 |
| Swing | range | 50 to 78 % | — | 1159 |
| Combo LFO | rate | 0.0166667 to 100 Hz | — | 1159 |
| Combo LFO | clocked rate | 0.03125 to 32 x clock | LFO Sync on | 1159 |
| Notes Mode | keys | 4 to 16 keys | — | 1159 |
| Voltages Mode | banks | 8 to 16 banks | — | 1159 |
| Voltages Mode | voltages per bank | 8 voltages | — | 1159 |
| presets | per mode | 99 presets | — | 1159 |
| Inversion / Rotate CV | step size | 1.25 V | — | 1159 |
| Semitone CV | step size | 0.083 V | — | 1159 |
| microSD card | capacity | 16 GB | — | 1159 |
| module | width | 8 hp | — | 1159 |
| module | maximum depth | 39 mm | — | 1159 |
| module | current draw +12V | 120 mA | — | 1159 |
| module | current draw -12V | 6 mA | — | 1159 |

## Behavior

- state save: when looper or sequencer playing → waits until playback stops [1159]
- Seq. Swing: when Seq Clock multiplied above 1 → no effect [1159]
- CLK IN: when pulses above 2400 BPM → ignored [1159]
- Euclidean pad: when Tête unclocked → pattern does not play [1159]
- Euclidean pad: when length set zero → simple drum trigger [1159]
- Voltages Mode trigger mods: when looper/sequencer playback → overridden by playback [1159]
- continuous CV mods: when looper/sequencer playback → offset on playback data [1159]
- Z IN slew: when beyond limits → clamped to available slew [1159]
- Run assignment: when gate low → playback pauses [1159]
- Semitone CV: when above C5 → CV ignored [1159]
- Tetrapad: when Tête connected → standalone modes don't apply [1159]
- Tête: when unreadable microSD → formats card FAT32 [1159]

## Sources

- [1159] Intellijel Tete + Tetrapad Manual v1.1 (manual): https://intellijel.com/downloads/manuals/tete_manual_v1.1_2021.02.14.pdf
- [1160] Intellijel Tete product page (product_page): https://intellijel.com/shop/eurorack/tete/

Full record as JSON: https://eurorackref.com/intellijel/tete.json
