# Swells (Intellijel)

Canonical page: https://eurorackref.com/intellijel/swells/

- id: `intellijel/swells`
- width: 20 HP; depth: 30 mm
- power: +12 V 117 mA, −12 V 6 mA, +5 V 0 mA
- status: current
- functions: Reverb, Stereo Inputs / Outputs, Envelope Follower, ADSR Envelope, Looping / Cycling Envelope, Freeze / Hold, Reverse playback, Distortion / Saturation, Noise Source, Tempo / Clock Sync, Pitch Shifter / Frequency Shifter, Compressor / Dynamics, Attenuverter / Offset

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| IN L | audio | left audio input | not stated | unknown | — | 972 |
| IN R | audio | right audio input | not stated | unknown | IN L | 972 |
| TRIG | trigger, gate, clock | assignable trigger input | not stated | unknown | — | 972 |
| SC | audio, cv | sidechain for SWELL | -10 to 10 V | bipolar | — | 972 |
| LEVEL | cv | INPUT and MIX CV | -10 to 10 V | bipolar | SWELL | 972 |
| Mod Input (PREDLY) | cv | PREDLY modulation | -10 to 10 V | bipolar | SWELL | 972 |
| Mod Input (SIZE) | cv | SIZE modulation | -10 to 10 V | bipolar | SWELL | 972 |
| Mod Input (DECAY) | cv | DECAY modulation | -10 to 10 V | bipolar | SWELL | 972 |
| Mod Input (Lo-DAMP) | cv | Lo-DAMP modulation | -10 to 10 V | bipolar | SWELL | 972 |
| Mod Input (Hi-DAMP) | cv | Hi-DAMP modulation | -10 to 10 V | bipolar | SWELL | 972 |
| Mod Input (EBB) | cv | EBB modulation | -10 to 10 V | bipolar | SWELL | 972 |
| Mod Input (FLOW) | cv | FLOW modulation | -10 to 10 V | bipolar | SWELL | 972 |
| Mod Input (EQ) | cv | EQ modulation | -10 to 10 V | bipolar | SWELL | 972 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| SWELL | cv | SWELL envelope output | 0 to 5 V | unipolar | SWELL Generator | 972 |
| OUT L | audio | left audio output | not stated | unknown | reverb, MIX | 972 |
| OUT R | audio | right audio output | not stated | unknown | reverb, MIX | 972 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| PREDLY | fader | pre-delay time | 0 to 250 ms | reverb | 972 |
| SIZE | fader | reverb size | — | reverb | 972 |
| DECAY | fader | decay / feedback | — | reverb | 972 |
| Lo-DAMP | fader | low-frequency damping | — | reverb | 972 |
| Hi-DAMP | fader | high-frequency damping | — | reverb | 972 |
| EBB | fader | model-specific parameter 1 | — | reverb | 972 |
| FLOW | fader | model-specific parameter 2 | — | reverb | 972 |
| EQ | fader | high/low tilt EQ | — | reverb | 972 |
| CV Attn (PREDLY) | knob | PREDLY mod amount | — | PREDLY, Mod Input (PREDLY), SWELL | 972 |
| CV Attn (SIZE) | knob | SIZE mod amount | — | SIZE, Mod Input (SIZE), SWELL | 972 |
| CV Attn (DECAY) | knob | DECAY mod amount | — | DECAY, Mod Input (DECAY), SWELL | 972 |
| CV Attn (Lo-DAMP) | knob | Lo-DAMP mod amount | — | Lo-DAMP, Mod Input (Lo-DAMP), SWELL | 972 |
| CV Attn (Hi-DAMP) | knob | Hi-DAMP mod amount | — | Hi-DAMP, Mod Input (Hi-DAMP), SWELL | 972 |
| CV Attn (EBB) | knob | EBB mod amount | — | EBB, Mod Input (EBB), SWELL | 972 |
| CV Attn (FLOW) | knob | FLOW mod amount | — | FLOW, Mod Input (FLOW), SWELL | 972 |
| CV Attn (EQ) | knob | EQ mod amount | — | EQ, Mod Input (EQ), SWELL | 972 |
| INPUT | knob | input level to reverb | — | reverb, DRIVE | 972 |
| MIX | knob | dry / wet mix | — | OUT L, OUT R | 972 |
| LEVEL Attn (INPUT) | knob | LEVEL CV to INPUT | — | INPUT, LEVEL | 972 |
| LEVEL Attn (MIX) | knob | LEVEL CV to MIX | — | MIX, LEVEL | 972 |
| RISE | knob | SWELL attack time | 10 to 5000 ms | SWELL Generator | 972 |
| FALL | knob | SWELL release time | 10 to 5000 ms | SWELL Generator | 972 |
| THRESH | knob | SWELL trigger threshold | — | SWELL Generator | 972 |
| MODEL X / Y / Z | switch | reverb bank select | — | reverb | 972 |
| MODEL 1 / 2 / 3 | switch | reverb model select | — | reverb | 972 |
| LO-FI | switch | model modifier intensity | — | reverb, LO-FI | 972 |
| IN / SC / OUT | switch | SWELL source select | — | SWELL Generator | 972 |
| FREEZE | button | freeze toggle | — | FREEZE, reverb | 972 |
| REVERSE | button | reverse toggle | — | REVERSE, reverb | 972 |
| SWELL | button | manual SWELL trigger | — | SWELL Generator | 972 |
| BURST | button | manual burst trigger | — | BURST, reverb | 972 |
| ALT | button | Alt Page access | — | INPUT, MIX, RISE, FALL, FREEZE, REVERSE, SWELL, BURST | 972 |

## Modes

- Fog [972]
- Blur [972]
- Shadow [972]
- Velvet [972]
- Asterion [972]
- Deadspace [972]
- Buckets [972]
- Ritual [972]
- Gaze [972]
- LO-FI OFF (LO-FI = OFF) [972]
- LO-FI MIN (LO-FI = MIN) [972]
- LO-FI MAX (LO-FI = MAX) [972]
- Follow [972]
- Gated [972]
- One Shot [972]
- Delayed One Shot [972]
- Looped [972]
- Alt Page [972]
- TRIG Assignment Page [972]
- Advanced CV + SWELL Assign [972]
- Send/Return Mode [972]
- Glitchy Switch Mode [972]
- Reverse Sync [972]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 20 HP | — | 972 |
| module | depth | 30 mm | — | 972 |
| module | +12V current | 117 mA | — | 972 |
| module | -12V current | 6 mA | — | 972 |
| PREDLY | pre-delay time | 0 to 250 ms | — | 972 |
| REVERSE | Reverse Time | 100 to 2000 ms | — | 972 |
| REVERSE | Reverse Sync divisions | 1 to 8 division | /1, /2, /4, /8 | 972 |
| TRIG | Reverse Sync clock period | 50 to 1250 ms | — | 972 |
| RISE | attack time | 10 to 5000 ms | — | 972 |
| FALL | release time | 10 to 5000 ms | — | 972 |
| TRIM | input gain | 0.5 to 2.5 x | — | 972 |
| TRIM | default gain | 1 x | — | 972 |
| EF GAIN | source gain | 0.5 to 2.5 x | — | 972 |
| EF GAIN | default gain | 1 x | — | 972 |
| HPF ➜ VERB | cutoff | 50 to 400 Hz | — | 972 |
| HPF ➜ VERB | default cutoff | 50 Hz | — | 972 |
| LPF ➜ EF | cutoff minimum | 40 Hz | CW = filter off | 972 |
| TRIG | threshold | 1.2 V | — | 972 |
| Alt Page | timeout | 20 s | — | 972 |
| module | reverb models | 9 count | — | 972 |
| module | sample rate | 96 kHz | — | 974 |
| module | I/O bit depth | 24 bit | — | 974 |
| module | internal processing | 32 bit float | — | 974 |
| Ritual | freq shifting | -100 to 100 Hz | LO-FI MAX | 972 |
| Ritual | free pitch | -1 to 1 octaves | LO-FI MIN | 972 |
| Velvet | Jel Compression ratio | 4 ratio | LO-FI MIN | 972 |
| Velvet | Squash Compression ratio | 8 ratio | LO-FI MAX | 972 |
| Buckets | BBD clock rate | 0.5 ratio | LO-FI MAX (1/2) | 972 |
| Buckets | BBD clock rate | 0.667 ratio | LO-FI MIN (2/3) | 972 |
| module | CV inputs | 9 count | — | 972 |
| module | attenuverters | 10 count | — | 972 |

## Behavior

- CV Attn: when set to centre → no modulation [972]
- Mod Input: when patched (normal mode) → breaks SWELL normalling [972]
- Advanced CV + SWELL Assign: when enabled → CV and SWELL both modulate [972]
- Advanced CV + SWELL Assign: when entering mode → all parameter modulation reset [972]
- FREEZE: when active → no new audio reaches reverb [972]
- FREEZE: when active → dry signal still heard [972]
- FREEZE: when button held → active until release [972]
- REVERSE: when button held → active until release [972]
- REVERSE: when Reverse Sync on, TRIG unpatched → reverb path goes silent [972]
- REVERSE: when clock period over 1.25s → may lose sync [972]
- REVERSE: when Reverse Time adjusted → PREDLY time unaffected [972]
- BURST: when button held → burst active [972]
- momentary FX button: when held, then ALT pressed → latched on [972]
- SWELL: when latched, pressed again → unlatched [972]
- Alt Page: when 20 s inactivity → times out [972]
- Alt Page: when active → LEDs show modulation amount [972]
- Send/Return Mode: when enabled → dry not passed to outputs [972]
- Send/Return Mode: when enabled → MIX sets wet level only [972]
- reverb: when model switched (default) → buffers cleared [972]
- reverb: when model switched, Glitchy mode → buffers not cleared [972]
- INPUT: when DRIVE enabled → also sets drive amount [972]
- THRESH: when turned CCW → more swells [972]
- THRESH: when turned CW → fewer swells [972]
- SWELL Generator: when Follow mode → input determines output level (Follow) [972]
- SWELL Generator: when threshold reached → input treated as full scale (Gated) [972]
- SWELL Generator: when threshold passed → full-length envelope (One Shot) [972]
- SWELL Generator: when signal drops below threshold → delayed full-length envelope fires (Delayed One Shot) [972]
- SWELL Generator: when threshold passed → envelope retriggers (looping) (Looped) [972]
- RISE: when MODE or THRESH changed → rise time affected [972]
- FALL: when MODE or THRESH changed → fall time affected [972]
- EQ: when centre position → no effect [972]
- EQ: when upper range → boost highs, cut lows [972]
- EQ: when lower range → boost lows, cut highs [972]
- DAMP: when slider at top → minimal damping [972]
- DAMP: when slider at bottom → maximum damping [972]
- TRIG: when above 1.2V → fires assigned functions [972]
- IN / SC / OUT: when IN → SWELL from IN L/R, pre-INPUT [972]
- IN / SC / OUT: when OUT → SWELL from reverb, pre-MIX [972]

## Sources

- [972] Intellijel Swells User Manual v1.1 (manual): https://intellijel.com/downloads/manuals/swells_manual_v1.1_2026.04.27.pdf
- [973] Intellijel Swells Quick Start (manual): https://intellijel.com/downloads/manuals/swells_quick_start.pdf
- [974] Intellijel Swells product page (product_page): https://intellijel.com/shop/eurorack/swells/

Full record as JSON: https://eurorackref.com/intellijel/swells.json
