# SVF 1U (Intellijel)

Canonical page: https://eurorackref.com/intellijel/svf-1u/

- id: `intellijel/svf-1u`
- width: 20 HP; depth: 35 mm
- power: +12 V 27 mA, −12 V 30 mA, +5 V ? mA
- status: current
- functions: Lowpass Filter, Highpass Filter, Bandpass / Notch Filter, Multimode Filter, Simultaneous Multimode Outputs, Self-Oscillating Filter, 1V/Oct Pitch Tracking, Distortion / Saturation

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Audio In | audio | filter audio input | not stated | not stated | — | 315 |
| PITCH CV | cv, pitch | cutoff 1V/oct input | not stated | not stated | — | 315 |
| FM CV | cv | cutoff FM input | not stated | not stated | — | 315 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| BP/N | audio | bandpass or notch output | not stated | not stated | State variable filter | 315 |
| LP Out | audio | 2-pole lowpass output | not stated | not stated | State variable filter | 316 |
| HP Out | audio | 2-pole highpass output | not stated | not stated | State variable filter | 316 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| CUTOFF | knob | filter cutoff | — | State variable filter | 315 |
| Q | knob | resonance | — | State variable filter | 315 |
| FM | knob | FM CV attenuverter | — | FM CV | 315 |
| CLIP | switch | input clip and gain | — | Input clip | 315 |
| BP/NOTCH | switch | BP/N output response | — | BP/N | 315 |
| PITCH | other | V/oct calibration trimmer | — | PITCH CV | 315 |
| LP/HP | other | notch balance trimmer | — | BP/N | 315 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| BP/N | slope | 12 dB/oct | — | 315 |
| LP Out | poles | 2 poles | — | 316 |
| HP Out | poles | 2 poles | — | 316 |
| CLIP | input boost | 6 dB | +6dB position | 315 |
| PITCH CV | 1V/oct tracking range | ≥ 4 octaves | — | 316 |
| self-oscillation | sine frequency range | 2 to 20000 Hz | max Q | 316 |
| LP/HP | factory setting | 75 % | HP side | 315 |
| module | width | 20 hp | — | 315 |
| module | maximum depth | 35 mm | — | 315 |
| module | current draw +12V | 27 mA | — | 315 |
| module | current draw -12V | 30 mA | — | 315 |

## Behavior

- Q: when fully clockwise → filter self-oscillates [315]
- FM: when clockwise of noon → CV raises cutoff [315]
- FM: when counterclockwise of noon → CV lowers cutoff [315]
- FM: when at noon → no FM modulation [315]
- LP/HP trimmer: when at 50% → symmetrical notch, no resonance [315]
- LP/HP trimmer: when turned off center → more volume and resonance [315]
- PITCH CV: when Q at maximum → filter as tracking sine oscillator [315]

## Sources

- [315] Intellijel SVF 1U Manual (2023.07.24) (manual): https://intellijel.com/downloads/manuals/svf-1u_manual_2023.07.24.pdf
- [316] Intellijel SVF 1U product page (product_page): https://intellijel.com/shop/eurorack/1u/svf-1u/

Full record as JSON: https://eurorackref.com/intellijel/svf-1u.json
