# Steppy 1U (Intellijel)

Canonical page: https://eurorackref.com/intellijel/steppy-1u/

- id: `intellijel/steppy-1u`
- width: 28 HP; depth: 29 mm
- power: +12 V 15 mA, −12 V 1 mA, +5 V ? mA
- status: current
- functions: Trigger / Euclidean Sequencer, Probability / Bernoulli Gate, Clock Divider / Multiplier

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| CLK | clock, trigger | clock input | not stated | not stated | — | 1101 |
| RST | trigger, gate | reset / run | not stated | not stated | — | 1101 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| OUT A | gate | Track A gate | ≤ 5 V | unipolar | Track A | 1101 |
| OUT B | gate | Track B gate | ≤ 5 V | unipolar | Track B | 1101 |
| OUT C | gate | Track C gate | ≤ 5 V | unipolar | Track C | 1101 |
| OUT D | gate | Track D gate | ≤ 5 V | unipolar | Track D | 1101 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| MULTIFUNCTION Buttons | button | 16 step buttons | — | Track A, Track B, Track C, Track D | 1101 |
| SELECT | button | Select Mode toggle | — | Track A, Track B, Track C, Track D | 1101 |
| EDIT | button | Edit Mode toggle | — | Track A, Track B, Track C, Track D | 1101 |
| TRACK buttons | button | track select | — | Track A, Track B, Track C, Track D | 1101 |
| PAGE buttons | button | page select | — | Track A, Track B, Track C, Track D | 1101 |
| MUTE buttons | button | track mutes | — | Track A, Track B, Track C, Track D | 1101 |
| PAGE FOLLOW | button | display follows page | — | Track A, Track B, Track C, Track D | 1101 |
| LOOPY | button | performance looper | — | Track A, Track B, Track C, Track D | 1101 |
| RESET | button | reset all tracks | — | Track A, Track B, Track C, Track D | 1101 |
| CLEAR | button | clear track | — | Track A, Track B, Track C, Track D | 1101 |
| GATE | menu_setting | track gate length | — | Track A, Track B, Track C, Track D | 1101 |
| CLK ÷ | menu_setting | track clock division | 1 to 64 | Track A, Track B, Track C, Track D | 1101 |
| SWING | menu_setting | track swing | 50 to 78 % | Track A, Track B, Track C, Track D | 1101 |
| DELAY | menu_setting | track step delay | 0 to 58 % | Track A, Track B, Track C, Track D | 1101 |
| PROB | menu_setting | step probability | ≤ 100 % | Track A, Track B, Track C, Track D | 1101 |
| SHIFT | menu_setting | pattern rotate | -4 to 4 steps | Track A, Track B, Track C, Track D | 1101 |
| SAVE | button | save preset | — | Preset memory | 1101 |
| LOAD | button | load preset | — | Preset memory | 1101 |

## Modes

- Play [1101]
- Select (SELECT = press/release) [1101]
- Edit (EDIT = short press) [1101]
- Step Edit (EDIT = long press) [1101]
- TAP Recording [1101]
- Loopy [1101]
- RESET [1101]
- RUN [1101]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| tracks | count | 4 tracks | — | 1101 |
| track | length | 1 to 64 steps | — | 1101 |
| page | steps per page | 16 steps | — | 1101 |
| track | pages | 4 pages | — | 1101 |
| CLK ÷ | clock division | 1 to 64 division | — | 1101 |
| SWING | swing | 50 to 78 % | — | 1101 |
| DELAY | step delay | 0 to 58 % | — | 1101 |
| PROB | probability | ≤ 100 % | — | 1101 |
| PROB | per-step options | 33 to 100 % | Step Edit | 1101 |
| SHIFT | rotation | -4 to 4 steps | — | 1101 |
| ratchets | per step | 1 to 12 gates | — | 1101 |
| clock pulse | ticks per pulse | 24 ticks | — | 1101 |
| Preset memory | presets | 8 presets | — | 1101 |
| OUT A-D | gate level | 5 V | — | 1101 |
| buttons | long-press time | ≥ 1 s | — | 1101 |
| module | width | 28 HP | — | 1101 |
| module | depth | 29 mm | — | 1101 |
| module | depth | 29 mm | — | 1102 |
| module | current +12V | 15 mA | — | 1101 |
| module | current -12V | ≤ 1 mA | — | 1102 |

## Behavior

- Steppy: when no CLK input → does not play [1101]
- CLK: when each pulse → advance one step [1101]
- gate/delay/swing/ratchets: when irregular clock → unpredictable timing [1101]
- RST: when RESET mode, trigger → all tracks to step 1 (RESET) [1101]
- RST: when RUN mode, gate high → patterns play, reset (RUN) [1101]
- RST: when RUN mode, gate low → patterns stop (RUN) [1101]
- RST: when arrives just after clock → step 1 fires immediately [1101]
- SELECT: when held with button → momentary Select Mode [1101]
- GATE: when minimum value → input pulse width [1101]
- GATE: when maximum value → full step, ties [1101]
- swing and delay: when both set → offsets summed [1101]
- gate length: when overlaps next step → gate shortened [1101]
- PROB: when 100% (default) → plays as programmed [1101]
- SHIFT: when steps beyond track length → not shifted [1101]
- PAGE button: when pressed in Select → Page Follow off [1101]
- Loopy: when one step held → single step repeats (Loopy) [1101]
- Loopy: when two steps held → loops between steps (Loopy) [1101]
- Loopy: when buttons released → resumes normal position (Loopy) [1101]
- Loopy: when engaged → applies to all tracks (Loopy) [1101]
- CLEAR: when short press → gates cleared, parameters kept [1101]
- CLEAR: when long press → gates and parameters cleared [1101]
- LOAD preset: when long press → loads after Track 1 cycle [1101]
- Step Edit value: when lowest option → defers to track value (Step Edit) [1101]
- ratchet: when assigned to step → gate length one tick [1101]
- track probability: when ratcheted step → applies to whole step [1101]
- copy track: when pattern copied → parameters not copied [1101]
- copy page: when pattern copied → length not extended [1101]
- RESET button: when pressed in Select → resets immediately [1101]
- TAP top-right buttons: when held → clears upcoming steps (TAP Recording) [1101]

## Sources

- [1101] Intellijel Steppy 1U Manual v1.2 (2020-10-26) (manual): https://intellijel.com/downloads/manuals/steppy-1u_manual_1.2_2020.10.26.pdf
- [1102] Intellijel Steppy 1U product page (product_page): https://intellijel.com/shop/eurorack/1u/steppy-1u/

Full record as JSON: https://eurorackref.com/intellijel/steppy-1u.json
