# Ringmod 1U (Intellijel)

Canonical page: https://eurorackref.com/intellijel/ringmod-1u/

- id: `intellijel/ringmod-1u`
- width: 6 HP; depth: 32 mm
- power: +12 V 25 mA, −12 V 20 mA, +5 V ? mA
- status: current
- functions: Ring Modulator, VCA

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| IN X | audio, cv | ring mod input | not stated | unknown | — | 1312 |
| IN Y | audio, cv | ring mod input | not stated | unknown | — | 1312 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| RING OUT | audio, cv | ring mod output | not stated | unknown | Ring Modulator | 1312 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| trimmer | other | calibration trim | — | Ring Modulator | 1312 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 6 HP | — | 1312 |
| module | depth | 32 mm | — | 1312 |
| module | +12V current | 25 mA | — | 1312 |
| module | -12V current | 20 mA | — | 1312 |

## Behavior

- IN X: when CV patched, audio IN Y → IN X sets IN Y volume [1312]
- OUTPUT LED: when RING output signal → color polarity, intensity amplitude [1312]
- trimmer: when 1kHz square into IN X → adjust for flat 0V [1312]

## Sources

- [1312] intellijel Ringmod 1U manual (manual): https://intellijel.com/downloads/manuals/ringmodulator-1u_manual_2022.07.26.pdf
- [1313] intellijel Ringmod 1U product page (product_page): https://intellijel.com/shop/eurorack/1u/ringmodulator-1u/

Full record as JSON: https://eurorackref.com/intellijel/ringmod-1u.json
